Converting Multiple Rows / Columns To One Single Long Row
Nov 22, 2012
I am working on putting together a very large spreadsheet covering multiple data sets over multiple states/years. I am trying to convert the data that I have in one spreadsheet (that is arranged like the example below) and make it so that I can paste the data into another spreadsheet as one single row: i.e, 1,651 would follow in the column to the right in the same row as 6.4 and so on. Right now I am having to copy and paste row by row and it is going to take me years.
3,484
2,179
62.5
2,053
58.9
126
5.8
5.2
6.4
[Code] .......
View 7 Replies
ADVERTISEMENT
Aug 24, 2012
I am trying to convert
Excel 2010
A
B
C
D
[Code].....
View 9 Replies
View Related
Feb 27, 2007
I have a very large sheet of all US zip codes by county name. Unfortunately, the document builder decided to list up to EIGHTEEN columns of zip codes per county name... I assume to make it easier to look at.
I now need to rebuild the sheet to have one column of county names and *one* column of zip codes, which will be a nearly impossible task if I don't find a way to automate the conversion.
Attached is a sample... sheet 1 is my initial state (except here its 5 columns rather than 18), and sheet 2 is my hoped for end state. Notice that the zip codes can, but don't always, fill every column allotted.
View 3 Replies
View Related
Aug 20, 2008
I have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
View 4 Replies
View Related
Jun 19, 2014
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies
View Related
Jul 29, 2014
I have a table in excel in which every line has as many values as the days of the month (e.g. 31 values first row, 28 the second..) and it goes from January 1948 to July 2014. So it ends up having around 800 rows.
I need to put all of those into a column, but it gets hard because the rows have different lengths. I have seen in this forum some solutions that apply well when the table is regular, but I'm stuck in trying to get a solution for when it's not. I have tried to record a macro using TRANSPOSE, but then I cannot change the cells into this formula in the editor in order to create a loop.
I also have to consider leap years.
View 4 Replies
View Related
Oct 15, 2013
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
View 4 Replies
View Related
Jan 11, 2007
I recieve a spreadsheet each month with the following column of data:
9 Paddington House
PO Box 73
Whiteleys of Bayswater
9-10 Grove Road
134/138 Drymen Road
44-46 The High Street
1 Midland Road
48 Donegall Place
As you can see, it consists of addresses, each line is a separate address. I need it to be converted so that the data is split into the following 5 fields:
Street number from
street number letter from
street number to
street number letter to
street
If there is no street number , then it should just enter the data into the street field. If there is a range such as 44-46, it should enter the 2 numbers into the from and to fields. Sometimes this is in the format 44/46. Also, sometimes there are letters, eg 44a-44b, in which case each section (ie 44, a, 44, b) needs to be in a spearate field.
View 9 Replies
View Related
Apr 7, 2014
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
View 3 Replies
View Related
Nov 22, 2007
I've been given a long list of mailing addresses in Excel in formatted as a single column, each address using three rows with no blank rows. Example:
John Doe
123 Maple St. #2
Cambridge, MA 02139
Jane Smith
321 Elm St. Apt 24
Austin, TX 34557
etc.
etc.
I need to get this data into the form ...
John Doe 123 Maple St. #2 Cambridge MA 02139
Jane Smith 321 Elem St. Apt. 24 Austin TX 34557
I would think this has been done, but I've searched the web and this forum without success.
View 3 Replies
View Related
Mar 23, 2013
I have a spreadsheet that has many columns I need them to be stacked into rows to import them into a publishing program but I don't know how to accomplish this automatically. right now all I know how to do is insert rows and drag and drop the info which is very time consuming.
I have attached a sample of the sheet. A2 through A12 is how I would like all of the data to appear. However A14 through G14 is how it looks now.
View 5 Replies
View Related
Jul 14, 2013
excel to convert the data from columns into rows as mentioned below
current excel data is
deptemp1salemp2sal2emp3sal3
HRAbc123bcv231sjn987
ITsddds9876ds999dsb123
Expected data
Deptempsal
HRAbc123
bcv231
sjn987
ITsdds9876
ds999
dsb123
There are close to 10000 records like this is there any formula/function to change this data.
View 11 Replies
View Related
Jan 12, 2010
I am trying to figure out an efficient way to convert data into Excel. The data is not in a row/column format. The format that I received the data in is as follows (2 columns; column labels repeating for each name in column A, and the corresponding data in column B. See below. Any ideas on how to best to convert this data into column labels across the top and data in rows under each column heading?
Column A Column B
Name John Doe
Address 123 Maple Street
City Any City
State Any State
Zip 12345
First Name John
Last Name Doe
BLANK ROW
Name Jane Doe
Address 123 Maple Street
City Any City
State Any State
Zip 12345
First Name Jane
Last Name Doe
View 9 Replies
View Related
Jul 18, 2009
I work with a lot of time based worksheets for a 24/7 operation and constantly use the formula:
=IF($E17>$D17,(HOUR($E17)+(MINUTE($E17)/60))-(HOUR($D17)+(MINUTE($D17)/60)),((HOUR($E17)+24)+(MINUTE($E17)/60))-(HOUR($D17)+(MINUTE($D17)/60)))
to calculate times worked where $D17 is start time and $E17 is finish time. Shifts can start and finish the same day ($E17>$D17) or go past midnight ($D17>$E17).
To make matters even more interesting, there are a number of variables that require adding either "and" and/or "or" conditions to this formula so I can end up with several of these nested and it gets pretty complicated.
I'd like to have a UDF so I can just enter the formula:
=CalcTime(Start Time,Finish Time)
View 9 Replies
View Related
Dec 17, 2012
I need to take a list of about 1,500 rows of data (single column) and convert it into columns of 9 entries. I know that I can select nine rows and then paste using transpose... But any way of "automating" the process?
So
1
2
3
4
5
6
7
8
9
ETC
ETC
becomes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 etc....
View 5 Replies
View Related
Aug 23, 2009
How can I convert a table from rows to columns as shown below??? Thanks for the feedback...
Current file with:
Unit_no work_order_date
1234 1/1/2005
1234 6/10/2006
1234 10/1/2007
4321 2/3/2004
4321 5/12/2005
Change to:
Unit_no work_order_date work_order_date2
1234 1/1/2005 6/10/2006
1234 6/10/2006 10/1/2007
4321 2/3/2004 5/12/2005
Will be working with data to sum data between the two work order dates...
View 9 Replies
View Related
Aug 10, 2013
I need to convert data from long to wide form but I haven't been able to do it. I want to try and avoid using vba because I have exactly 5 hours of experience with it, but if there is no other way I will just have to learn it quick.
View 4 Replies
View Related
Mar 11, 2007
I have a user form and to input the hourly wage i need to convert the text entry to a number whose type is LONG and not integer.
Does anyone know how to do this?
Or is there a way to input a number in a userform without a text box entry?
View 9 Replies
View Related
Jan 12, 2010
I'm doing the website for my company and things have to be entered into the site via spreadsheets. I have a list of numbers
e.g. 3652, 2845, 50925, 4809, 18392
that need to have the spaces removed in order for them to work.
e.g. 3652,2845,50925,4809,18392
There are over 500 cells with multiple numbers in each, so I don't want to do it one at a time, and rightly so, because Excel keeps changing the format and giving me something like
3.6*10^30 and loses all my commas.
Is there an easier way?
View 7 Replies
View Related
Feb 7, 2014
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
View 6 Replies
View Related
Jan 15, 2013
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
View 12 Replies
View Related
Mar 5, 2012
I have a spreadsheet in one column contains multiple sets of data separated by commas see example 1.
I need convert the data to rows, each set into a new row see example 2.
Example 1: PS-8800-C,PS-8800-D,PS-8800-076,PS-8800-077,PS-8800-077A,PS-8800-078,2"-SC-4057-A-40H-GT
Example 2:
PS-8800-C (Row 1)
PS-8800-D (Row 2)
PS-8800-076 (Row 3)
View 4 Replies
View Related
Sep 22, 2008
I would like to combine values from multiple records into a single record using a unique identifier. In the example below 'ID' is the unique identifier.
For example:
View 3 Replies
View Related
Oct 17, 2011
I have in my cell a number, namely, 5260007005020024100055040300004110000000
What I would like to do is extract a set of digits from it,
Starting from the second 2, and shown here in the dots. I need all of the numbers in a separate cell, "52600070050200 .24100055.. 040300004110000000"
Hope this is clear. bearing in mind the number will remain as one so I would need to start at 14 then using LEN or something I'm not sure, extract the following 8 into another cell.
View 5 Replies
View Related
Feb 12, 2014
Before
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7
After
XXXXXXXYYYYYYYZZZZZZZ1234567
[Code] .....
View 10 Replies
View Related
Aug 17, 2006
I have a long list of 2 columns containing data as follows:
country1 date1-1
country1 date1-2
country1 date1-3
country2 date2-1
country2 date2-2
country3 date3-1
country4 date4-1
country4 date4-2
country4 date4-3
which I would need to move to get one column per country with the top cell the country name and below each name all the related dates, e.g.
country1 country2 country3 country4
date1-1 date2-1 date3-1 date4-1 etc.
date2-1 date2-2
date3-1
I have searched and found almost similar questions and tried to apply it to this case, but not being versed in VBA it was a failure on my part
View 4 Replies
View Related
Nov 28, 2009
I have a long spreadsheet, that has a format something like this: ...
View 6 Replies
View Related
Dec 24, 2007
Is there a way convert single cell with wrap text into multiple cells with the number of resulting rows based on the number of lines in the original cell. Due to the restrictions of my overall printable "document", I must use multiple cells of the same height. Any change of row height would throw off the desired final result.
As an example, when I start with my original cell in text wrap and set column width I get something like the following in cell F2:
ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME
MATERIAL)
This looks great, but it is all in one cell, and the four lines of wrapped text have obviously increased the row height which is bad.
I have tried using the LEFT and MID functions to force the text into different rows based on character length, but this is sort of messy since I am never sure what the input will be resulting in something like the following (this time in cells F2:F5) with spaces at the beginning of a line or breaks in the middle of words:
ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME MATE
RIAL)
My ultimate goal would be to somehow format the original input data text so that regardless of the input, the text would be restricted to a certain column width, sending the remaining text to the next consecutive rows down, and maintain the integrity of the original. I can have as many intermediate cells, formatting as I go to get to this point.
Of course, I could manually enter the text in the different rows every time, but it would be nice to have a succession of formatted cells so that the desired end result would be automatic. Hopefully, the answer does not involve too much in the way of macro or any VBA code since I am a pitiful novice, and we are sort of under pressure to get this project under way.
View 9 Replies
View Related
Feb 9, 2007
I have a cash receipt worksheet and want to sum up the days cash. My problem is some days there are one receipt and some there are five. I have to keep hitting the sum button to make it include the proper range.
View 7 Replies
View Related
Jun 21, 2013
My starting point is a big data set that needed to be validated by several users. I split the data set into smaller sets that were sent out. All users have filled in the same column called "Input"
What I would like to be able to do is to paste their input into a single column on my original data set and keep the name of the input next to it. Is it possible to paste without overlapping prexisting data ? Something of the likes of F5 ("Select blank cells/text") ?
I've attached a simple file with dummy data to explain myself.
View 5 Replies
View Related
