Convert Multiple Columns To Single Rows

Feb 27, 2007

I have a very large sheet of all US zip codes by county name. Unfortunately, the document builder decided to list up to EIGHTEEN columns of zip codes per county name... I assume to make it easier to look at.

I now need to rebuild the sheet to have one column of county names and *one* column of zip codes, which will be a nearly impossible task if I don't find a way to automate the conversion.

Attached is a sample... sheet 1 is my initial state (except here its 5 columns rather than 18), and sheet 2 is my hoped for end state. Notice that the zip codes can, but don't always, fill every column allotted.

View 3 Replies


ADVERTISEMENT

Convert Single Column To Multiple Columns

Dec 6, 2007

How can I sort a single column of data to multiple columns of data. e.g. I want to convert ~1800 rows of data from 1 column to 3 or 4 columns.

View 14 Replies View Related

Convert Multiple Rows To Single Row

Feb 4, 2014

I have a database of addresses that has each address as several rows which I want to convert into a single row. In the source file there is a blank row between records. I have attached a sample file with two sheets in it. One is the "before" data format and the other sheet is the "after" example of how I would like it to come out. We have thousands of records to convert so I need something that can be automated instead of a massive cut and paste operation.

Here is the sample: sample conversion.xlsx

View 4 Replies View Related

Convert Single Row To Multiple Rows

Mar 16, 2014

Macro to sort column data.

I have a spreadsheet in the following format (just a flavour of the format)

SD 1
SD2
SD3
1a
1b
1c
2a

[Code]...

Each row refers to a survey response, the first ten columns being standard demographics.

Following this each group of 5 columns for the next 100 columns represents a single response. What I want to do is convert each single row to multiple rows with the same first 10 columns and each single response on its own row like so:

SD1
SD2
SD3
a
b
c
a

[Code]...

I found an excellent similar example on this board here Convert a single row to multiple rows with the same A column value However I would like my macro to convert to rows even if the cells are blank So each existing row will generate 10 individual reponse rows regardless of data found).

I am interested to know how this would work and how i could modify the variables to acommodate 15 standard demographic fields and 20 columns per individual responses.

View 5 Replies View Related

Converting Multiple Rows / Columns To One Single Long Row

Nov 22, 2012

I am working on putting together a very large spreadsheet covering multiple data sets over multiple states/years. I am trying to convert the data that I have in one spreadsheet (that is arranged like the example below) and make it so that I can paste the data into another spreadsheet as one single row: i.e, 1,651 would follow in the column to the right in the same row as 6.4 and so on. Right now I am having to copy and paste row by row and it is going to take me years.

3,484
2,179
62.5
2,053
58.9
126
5.8
5.2
6.4

[Code] .......

View 7 Replies View Related

Split Single Column Into Multiple Columns And Rows

Aug 20, 2008

I have 300 rows worth of data that looks similar to this, all organized in one column:

John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555

As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.

John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555

Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.

View 4 Replies View Related

Convert Multiple Rows To Columns And Add Column Headers

Oct 17, 2009

I'm currently faced with a spreadsheet that has data formatted like this:
A
1 RandomRowofData1
2 RandomRowofData2
3 RandomRowofData3
4 RandomRowofData4
5 RandomRowofData5
6 RandomRowofData6
7 RandomRowofData7
8 RandomRowofData8
9 RandomRowofData9

Every 9 rows, a new "set" of data repeats itself (wow, this is so hard to put into words)....

I need to figure out a way to get the data in column "A", every 9 rows, to transpose itself into 9 separate columns.

View 4 Replies View Related

Convert/Transpose Multiple Groups Of Rows Across Columns

Mar 9, 2009

How to convert multiple Rows recors to a single row record in a Notes(csv) format? Have update my xls file. My source is in the below format(Source.xls):

GroupName_A,Name_A
GroupName_A,Name_B
GroupName_A,Name_C
GroupName_B,Name_D
GroupName_B,Name_E
GroupName_B,Name_F
GroupName_B,Name_G
GroupName_B,Name_H
GroupName_B,Name_I

I want to convert it to a CSV file where by it can be import to Lotus Notes (output.xls):

1,1,Group,GroupName_A,"Name_A,Name_B,Name_C","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM
1,1,Group,GroupName_B,"Name_D,Name_E,Name_F,Name_G,Name_H,Name_I","CN=John Sam/OU=FIN/OU=staff/O=IBM,CN=Mary Flow/OU=FIN/OU=staff/O=IBM",CN=John Sam/OU=FIN/OU=staff/O=IBM

As you can see only GroupNameN, and Name_N are varibles, the rest of the fields are static. note that there is opening and closing quota for column "E" and "F" in output.xls

View 5 Replies View Related

Summarize Data From Columns In Multiple Sheets To A Single Datasheet Of Rows

Jun 19, 2014

I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.

View 4 Replies View Related

Convert Multiple Columns To Rows Including Blank Cells

Apr 11, 2014

I currently have a spreadsheet that I had to convert from multiple rows to columns:

[URL]

Now I need a script to change the data so that each column is now in row format, (see attached spreadsheet).

View 5 Replies View Related

Excel 2010 :: Convert Multiple Columns To Rows Depending On Input Value

Jul 6, 2014

I have lot of data in Excel 2010 which I wish to bring in Columns using a Macro depending on the input value which the macro should prompt me. For E.g.:

A1B1C1D1E1F1G1H1I1J1
12345678910
12345678910
12345678910
12345678910
12345678910

If I select data from A1 and J1 (in practical it will be more Columns) the Macro should prompt me how many Columns would be the output on Master Sheet. If the input is 2 then it should create an output Sheet "Master" and should show the following result

A1B1
12
12
12
12
12
34
34
34
34
34
56
56
56
56
56
.. ..
.. ..

It after selection I run the macro and input 3 then the output should go in three columns (A1,B1,C1) one below other. If 4 is Input then 4 Columns (A1,B1,C1,D1) will come below each other so on and so forth.

View 6 Replies View Related

Multiple Lookup Values Rows And Columns To Lookup Single Target Column On Right End?

Apr 7, 2014

I have a table of data (say Column1 to Column 5) with multiple rows.

Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.

I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.

It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.

View 3 Replies View Related

How To Convert Multiple Coloums Data Into One Single Row

Sep 23, 2009

I have a data in different coloumns, that I want it to in one single Coloumn but different rows.
The data is like below

A B C D E F
1 Outer Inner Tip Nose
2 Outer Zip Stiffner Nose
3 Inner Tip
4 Zip Stiffner

The data are in A to F coloumns & in Different rows. This I want in one row - Like

Outer
Inner
Tip
Nose
Outer
Zip
Stiffner
Nose
Inner
Tip
Zip
Stiffner

View 9 Replies View Related

Convert Hourly Time Series Data From Rows To Single Column

Jan 8, 2014

I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.

If I were to do it manually 365 times, the macro would look like this:

Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)

repeat for rows 2-365

Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.

Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long

Set rng = Worksheets("Sheet1").Range("A1")

[Code] .....

View 3 Replies View Related

Convert Multiple Versions Of Cell Contents To Single Version?

Feb 28, 2014

I would like to automate the conversion of multiple versions of company names contained in cells to a single company name. i.e. XYZ Inc., XYZ Co., XYZ to all cells XYZ. My data file contains numerous versions of company names. I want them to all be the same company name so sorting data is easier. I now do this manually and it is getting tedious and time consuming. Can I build a table with the different versions that then chamges the cells to a single version that I choose?

View 1 Replies View Related

VLookup - Single Value Lookup Returning Multiple Records Into Multiple Columns

Feb 7, 2014

Certification and Training tracking.xlsx

I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.

What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.

View 6 Replies View Related

Splitting Multiple Entries In Single Cell Into Multiple Columns

Jan 15, 2013

I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows

Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID

Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3

How I could achieve this as I have a number of projects where this would become useful

I know you can use delimiters but with spaces between the values I just can't fathom a way forward.

View 12 Replies View Related

Transpose Multiple Columns For Single Row

Feb 12, 2014

Before
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7

After
XXXXXXXYYYYYYYZZZZZZZ1234567

[Code] .....

View 10 Replies View Related

Single List To Multiple Columns

Aug 17, 2006

I have a long list of 2 columns containing data as follows:
country1 date1-1
country1 date1-2
country1 date1-3
country2 date2-1
country2 date2-2
country3 date3-1
country4 date4-1
country4 date4-2
country4 date4-3

which I would need to move to get one column per country with the top cell the country name and below each name all the related dates, e.g.
country1 country2 country3 country4
date1-1 date2-1 date3-1 date4-1 etc.
date2-1 date2-2
date3-1

I have searched and found almost similar questions and tried to apply it to this case, but not being versed in VBA it was a failure on my part

View 4 Replies View Related

Convert Columns To Rows With DATA

Aug 5, 2008

i have a problem in copying many columns to to rows that originally contains data, this is gonna be really complicated so here is wt i want, let's assume i have this table .....

View 6 Replies View Related

Convert Several Rows Of Data To 2 Columns?

Mar 5, 2013

I am trying to convert some data...

I have a spreadsheet of 1000 rows on my spreadsheet and I am trying to convert them to 2 columns. Below is an example

Antidiarrheal AgentsBrand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume
Antidyskinetics Brand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume

I want it to look like this:

Antidiarrheal Agents Brand or Series
Antidiarrheal Agents Application
Antidiarrheal Agents Generic Drug Name
Antidiarrheal Agents Strength
Antidiarrheal Agents Type
Antidiarrheal Agents Dosage Form
Antidiarrheal Agents Container Type
Antidiarrheal Agents Volume
Antidyskinetics Brand or Series
Antidyskinetics Application
Antidyskinetics Generic Drug Name
Antidyskinetics Strength
Antidyskinetics Type
Antidyskinetics Dosage Form
Antidyskinetics Container Type
Antidyskinetics Volume

Is there a formula or a suggested way of doing a macro to acheive this?

View 1 Replies View Related

How To Convert A Block Of Rows To Columns

Jun 19, 2013

I want to convert a bloack of rows to columns

1abc2xyz3mnq
4efg5klm6rst

required format
1abc
4efg
2xyz
5klm
3mnq
6rst

View 2 Replies View Related

Convert Data From Columns To Rows

Dec 2, 2009

I have a spreadsheet that consists of columns of data and I need to covert it into rows depending on how the data is set up. In column A, there is a list of invoice numbers. Columns B, C, & D are as follows:

Column B: Sales Rep Name
Column C: Sales Rep Number
Column D: Sales Rep % Split

I want to have a single row for each unique invoice number. As an example, I have the following:

Row 1: invoice ABCD-1234 Sales Rep 1: 55%
Row 2: invoice ABCD-1234 Sales Rep 2: 25%
Row 3: invoice ABCD-1234 Sales Rep 3: 20%

I want the output as follows:

Row1: invoice ABCD-1234 Sales Rep 1: 55% - Sales Rep 2: 25% - Sales Rep 3: 20%

I have attached a sample workbook with two sheets; one containing the raw data and the second, which shows the desired output.

View 2 Replies View Related

Convert Columns To Rows With Formulas

Dec 21, 2009

I have some mails in a colum and i would like to put with a formula into a cell.
For example, in column I have:

mail1@hotmail.com
mail2@hotmail.com
mail3@hotmail.com
mail4@hotmail.com
mail5@hotmail.com
mail6@hotmail.com

And into anything cell i would like to put with the coma:

View 9 Replies View Related

Convert Data From Rows To Columns

Jan 5, 2008

I have data which is in rows. I want them to be in 5 columns.

I am attaching the sample.

for some of the entries, there will be 6 rows:
Company Name - 2nd row
Address - 3 row.
In this case, I want to combile them as one entry Separated by a comma
& placed in one column
Eg: For 3rd one in sample,

Haifa Marble & Tile
69 Garfield St
Wanted Result: Haifa Marble & Tile, 69 Garfield St

If this is not possible, then suggest how to combine two columns to make it
into one column separated by comma.

View 9 Replies View Related

Convert Row To Multiple Columns

May 20, 2007

I am work a worksheet that contain the data like that
A B
NUM1 Jene,Joly
NUM2 Jene,Selo,Diff
MUM3 Tino,Selo

this worksheet has over 1,000 data.
i want get the result in sheet2 as below:
A B
NUM1 Jene
NUM1 Joly
NUM2 Jene

i write the code
[PHP]Sub test()
Dim i As Integer
Dim arr() As String
Application. ScreenUpdating = False
On Error Resume Next
For i = 1 To Cells(Rows.Count, 1).End(xlUp).Row
arr = Split(Cells(i,2), ",")
For J = 0 To UBound(arr)
With Worksheets(2)
LASTROW = .Cells(Rows.Count, 2).End(xlUp).Row + 1
.Cells(LASTROW, 1) = Cells(i, 1)
.Cells(LASTROW, 2) = arr(J)
End With
Next J
Next i
Erase arr
Application.ScreenUpdating = True
End Sub
[/PHP]

the defult of this code is that it will take long time to get the result.so,i want to know how to make the code run fast.

View 9 Replies View Related

Multiple Rows To A Single Row

Nov 28, 2009

I have a long spreadsheet, that has a format something like this: ...

View 6 Replies View Related

Single Row Into Multiple Rows

Dec 24, 2007

Is there a way convert single cell with wrap text into multiple cells with the number of resulting rows based on the number of lines in the original cell. Due to the restrictions of my overall printable "document", I must use multiple cells of the same height. Any change of row height would throw off the desired final result.

As an example, when I start with my original cell in text wrap and set column width I get something like the following in cell F2:

ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME
MATERIAL)

This looks great, but it is all in one cell, and the four lines of wrapped text have obviously increased the row height which is bad.

I have tried using the LEFT and MID functions to force the text into different rows based on character length, but this is sort of messy since I am never sure what the input will be resulting in something like the following (this time in cells F2:F5) with spaces at the beginning of a line or breaks in the middle of words:

ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME MATE
RIAL)

My ultimate goal would be to somehow format the original input data text so that regardless of the input, the text would be restricted to a certain column width, sending the remaining text to the next consecutive rows down, and maintain the integrity of the original. I can have as many intermediate cells, formatting as I go to get to this point.

Of course, I could manually enter the text in the different rows every time, but it would be nice to have a succession of formatted cells so that the desired end result would be automatic. Hopefully, the answer does not involve too much in the way of macro or any VBA code since I am a pitiful novice, and we are sort of under pressure to get this project under way.

View 9 Replies View Related

Sum Multiple Or Single Rows

Feb 9, 2007

I have a cash receipt worksheet and want to sum up the days cash. My problem is some days there are one receipt and some there are five. I have to keep hitting the sum button to make it include the proper range.

View 7 Replies View Related

Pasting Multiple Columns Into A Single Column?

Jun 21, 2013

My starting point is a big data set that needed to be validated by several users. I split the data set into smaller sets that were sent out. All users have filled in the same column called "Input"

What I would like to be able to do is to paste their input into a single column on my original data set and keep the name of the input next to it. Is it possible to paste without overlapping prexisting data ? Something of the likes of F5 ("Select blank cells/text") ?

I've attached a simple file with dummy data to explain myself.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved