Copy AutoFiltered Column

May 2, 2008

Autofilter going across several columns in Sheet1, I want the values represented in a certain autofilter pasted into another Column in Sheet2. For example: I want the values in the autofilter for column B in Sheet 1 to be pasted into column H in Sheet 2. Assuming there are 10 values in autofilter column B they would be pasted into cells H1 to H10 in Sheet 2.

View 5 Replies


ADVERTISEMENT

Copy Autofiltered Column Into Another Column Within Same Table

Apr 7, 2013

I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?

Example

Col A
Col B
Col C
SN0001
1/31/2013
1/15/2013

[Code]...

I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.

This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.

View 4 Replies View Related

Copy & Paste Autofiltered Selection In VBA

Oct 22, 2008

I have autofiltered a selection of data then issued the copy command in the code below so as to copy the visible area. In attempting to paste the data in the first blank row the program fails on the last code statement, "ActiveSheet.Paste".

The error is 1004.

An alternative suggested in the error message is to select an area the same shape and size as that being copied to paste into. Given that the copied data will change on each run how might I do this, and is this a valid alternative?

Selection.AutoFilter
Selection.AutoFilter Field:=7, Criteria1:="=TC", Operator:=xlAnd
Selection.AutoFilter Field:=2, Criteria1:=">=7330", Operator:=xlAnd
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Range("A" & LR + 1).Select
ActiveSheet.Paste
NB. most of the code has been generated by the Macro recorder.

View 9 Replies View Related

Copy AutoFiltered Data, Less Headings, To Another Worksheet

Jun 3, 2008

I want to filter the data and next. I want to copy the data from sheet1 to sheet2;
below code working fine, but.

Sub CopyFilter()
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else.............................

View 2 Replies View Related

Count Rows After Autofiltered

Dec 27, 2011

How come it still gives me "1" when the number of visible rows is 0 after autofilter?

Range("data").AutoFilter Field:=3, Criteria1:="=" & r.Value
j = Worksheets("Sheet1").Range("A2", Range("A" & Rows.Count).End
(xlUp)).Cells.SpecialCells(xlCellTypeVisible).Count
MsgBox (j)

View 9 Replies View Related

Show Certain Number Of Autofiltered Rows?

Jul 1, 2014

The attached sample is a simple version of the sheet that I'm using. The buttons are triggering preset auto-filters (try pressing the colored buttons, those work for sure :D). Is it possible to only show the number of rows that is input in the textbox - regardless of the actual row number, just count the first "x" visible rows and not show anything else. In O3 I tried to make a sample of the desired result. So ideally I will be able to press one of the colored buttons and then type in the number of rows that I want to see.

View 5 Replies View Related

Copying Information From An Autofiltered Worksheet

Feb 6, 2009

I want to create a macro that will take information from one worksheet to another. The problem is that the first worksheet has an autofilter and i do not know how copy information only from the cells that were filtered with the correct information without copying it manually.

View 3 Replies View Related

Insert Row Above Every Line In Autofiltered List?

Jun 10, 2014

I have the following vb to insert a row above every row in an autofiltered list (autofiltered for nonblanks).

Problem is that if in the autofiltered list there is not a gap then it inserts a row for each line where there is no gap

SO for instance if in the filtered list cell A500:a505 have no gaps between them (meaning all are nonblanks) the vb will insert 6 rows above A500 and leave no rows inserted above a501, a502, ...etc

I have approx 10,000+ rows and there are approx 550 rows that I need to insert a row above (but want to automate/save time) by having the vb do it.

Code:
Sub InsertRow()
' Insert a row between each Client/Cycle
'Will have some manual cleanup after this step

[Code].....

View 1 Replies View Related

Visible Row Number In Autofiltered List

Jul 20, 2007

I have a list of numbered items and what I would like to do is display that items position in the list should an autofilter be applied

For example, with no filter applied the list could look like this:-

Col A Col B Col C
1 1 Armadillo
2 2 Platypus
3 3 One-legged Schornztickler
4 4 Armadillo

And when the autofilter is applied to Col C with a criteria of Armadillo the results should display thus:-

Col A Col B Col C
1 1 Armadillo
4 2 Armadillo

I'd really like a non VBA solution, but as I can't work one out myself I guess that's not an option?

View 9 Replies View Related

Macro To Select Only Criteria With AutoFiltered Selection

Mar 9, 2009

The VB for a macro to select only the rows/cells within an autofiltered selection. So if I Autofiltered this set of data by Column F where Lookup = NO
it would only display Rows 3 & Row 7.

I would want the Macro then to select only these rows, then copy/paste them to another Worksheet called "Static".

************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF2F3F4F5F6F7F8F9F10=ABCDEF1Incident #Entry DateReceived Date# of days, Entry to ReceivedInst Act #Lookup2123456-102/16/0902/24/098A1YES3654321-202/17/0902/19/092A2NO4456125-102/17/0902/25/098A3YES5345678-302/17/0902/25/098A4YES6123456-202/17/0902/23/096A1YES7654321-302/17/0902/23/096A2NO8456125-202/17/0902/23/096A3YES9345678-402/17/0902/23/096A4YES10123456-302/17/0902/25/098A1YESSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 10 Replies View Related

1st Visible Cell Below Heading Of AutoFiltered Range

Apr 3, 2008

Im trying to create a userform that will enable the user to select a record from a listbox and then to edit the info for that record by changing the contents of text boxes which are set to display the current info. What I have seems to work intermittently. I basically use autofilter to find the selected record on the worksheet, then I set the value of each cell in the row to that of the appropriate textboxes. ListBox2.Column(4) contains the unique id for the selected record.

Private Sub saveclient_Click()
Dim WS As Worksheet
Dim newrng As Range
With Application
.ScreenUpdating = False
.EnableEvents = False
End With
Set WS = Sheets("Clients") '<<< Change
Sheets("Clients").Select
WS.AutoFilterMode = False
Set newrng = WS.Range("A1:e" & Rows.Count)
MsgBox Me.ListBox2.Column(4)......................

View 3 Replies View Related

AutoFiltered Subtotals Permanently Displayed (Baseball Statistics)

May 8, 2014

I am tracking baseball batting statistics. The first column in each row is the player's name and the next column is the date. Several columns of statistics follow. I enter the batting stats game by game. I know I can use the SUBTOTAL function combined with AutoFilter to view each player's statistics individually totalled, but what I'd like is to see that subtotal line permanently displayed for each player.

View 2 Replies View Related

Transfering Large Amounts Of Autofiltered Data To New Worksheet

Feb 10, 2009

I have a problem with my current macro that uses a basic autofilter to auto filter from the parent database to extract the correct rows and then copies the query and pastes it into a new worksheet to further proceed with the macro.

I have run into a problem because my database has become very big and now when I try to autofilter the query and click on copy, an error regarding the data range reference is too complex - use data that can be selected in one contiguous rectangle

I tried a few things such as to autofilter out everything I dont need and hit delete - this does not work either, same result

I got help here previously in which the code deletes All Hidden Rows and this is very time consuming, I have not tested all my methods but it took 15 minutes to delete hidden files for one method and theres roughly 5 in total

I have to end up running this code on the parent worksheet multiple times because I use the parent worksheet to extract different parameters into different worksheets!

I have noticed that if I manually copy the data in smaller blocks, by halving the data seems to work,but I do not know how large of a partition I am limited to copy because my database is very large and the size varies month-to-month so I cannot put a number on the max range. I think if I could get a macro to do it by thirds or preferably quarter range should be safe.

So just to summarize, I am trying to devise a method in which I would auto filter on the active parent sheet "sheet 1" and I would copy the auto-filtered query to "sheet2" instead of copying the whole worksheet in one instance I would like to split the autofitlered query into four equal parts with respect to the range of the worksheet and then to copy the first quarter of the query and paste in sheet 2 and then the second quarter to sheet 2 and so on untill all four quarters are done one after the other, so sheet 2 should be a series of all four parts combined into one series on sheet2

View 9 Replies View Related

Auto Filtering :: Return The Worksheet Backs To Its Original State Before I Autofiltered?

Mar 6, 2008

I have a worksheet with various data autofiltered. I know when I filter on one of the fields, the drop down arrow becomes blue. If I filter on one or more fields, finding which fields I have autofiltered can become hard to find.

This is my question -- Can I put a button or some type of one touch command were I can take those autofilters off and return the worksheet backs to its original state before I autofiltered?

View 9 Replies View Related

VBA Autofiltered Cells - Calculate Average And Sum Of Visible Cells?

Aug 31, 2012

I have a macro which autofilters a range of cells.

I can count the number of visible rows by using the following code

Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count

What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.

View 1 Replies View Related

Copying An Autofiltered Query From Worksheet A To Worksheet B In The Same Book

Jan 6, 2009

There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.

View 9 Replies View Related

Alter Existing Formula To Copy Specific Cells In Row Instead Of Copy Entire Column?

May 1, 2014

I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.

I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.

View 11 Replies View Related

Copy And Paste From One Sheet To Another Based On Column A Using A Macro Copy Button

Jan 22, 2007

I want to copy and paste from one sheet to another based on column a using a macro copy button.

E.g. if column a value = apple then copy that row into the apple sheet.

View 9 Replies View Related

Copy Conditional Formats: Copy To The Rest Of The Column

Mar 29, 2009

I have a cell with seven conditional formatting formula rules that I now want to copy to the rest of the column. I can copy/paste special/formats one cell at a time but if I try to to this with a group of cells, (or try using the format painter), it treats the formula references as absolute, even though they aren't shown as absolute in the rules manager. Am I missing something? Using 2007.

View 4 Replies View Related

Merge Two Workbooks. Copy Column Data Based On Numerical ID Match Of Another Column.

Mar 13, 2009

I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.

I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.

View 2 Replies View Related

Macro To Copy Data From Previous Column Into Next Free Column

Aug 20, 2014

I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:

[Code] .....

I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.

View 5 Replies View Related

Copy Same Column From List Of Worksheets To Summary Page To Next Available Column

Feb 26, 2013

If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.

macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...

NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.

View 1 Replies View Related

How To Copy Value From Column A After Blank Line And Insert Text In Column B

Mar 21, 2014

I have a workbook that usually looks something like this

Category Product No description Price

Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80

Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06

Banners 10000 Party banner .33

etc..

I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.

View 6 Replies View Related

Setup A Macro To Copy Text From A Column Of Cells To Another Column

May 22, 2008

I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....

View 9 Replies View Related

Autofilter Column A Then Copy Data To Another Sheet With An Empty Column

Mar 7, 2007

I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.

It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.

Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate

Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................

View 2 Replies View Related

Copy Or Move Column Ranges From 1 Sheet To End Of Column Range Of Another

Mar 7, 2008

I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.

So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.

If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.

View 8 Replies View Related

Copy Cells From Column To Adjacent Column If Bold Or Empty

May 20, 2008

I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.

The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.

View 5 Replies View Related

Copy From One Column And Paste To Another Column By (alt + Enter) Function

Nov 22, 2008

i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".

View 4 Replies View Related

Copy Color Of Column B And Put In Respective Cell In Column A

Feb 27, 2012

I need a code to copy the color of column B and put in the respective cell in Column A. I just need the color to copy from column B to Column A.

View 6 Replies View Related

VBA To Copy Non-blank Cells From Column And Paste Into Another Column

Oct 4, 2013

In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved