Copy Data From Multiple Files

Mar 23, 2007

I have multiple workbooks in a directory and I need to copy a range of cells from 1 particular worksheet in each workbook and paste the data into the " consolidation workbook (Lar.xls)" that contains the macro I'm working on. I have found the code to open & close all of the workbooks and I can even get to the particular sheet in the workbooks but I cannot select and copy the range of cells that I need (I cannot get it to select any specific cell on the worksheet). Here's the code I'm using, have tried many different variations with the same problem.

Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
'Change path to suit
.LookIn = "C:Temp1"
.FileType = msoFileTypeExcelWorkbooks
'.Filename = " Book*.xls"................................

View 2 Replies


ADVERTISEMENT

To Copy Data From Multiple Files

Jun 29, 2009

way to take the data from a specific cell that is in the sheet1from every file and put those result in the A2,A3,A4,... cells in the sheet1 of new excel file.

View 13 Replies View Related

Copy And Rename Files In VBA By Searching Multiple Folders For Files?

Jan 4, 2014

how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below

Company 1(parent folder)
North South East(sub folder) West(sub folder)
Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec

In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)

View 1 Replies View Related

Copy Multiple Columns From Multiple Excel Files & Paste Into 1 Workbook

Nov 7, 2009

I have 8 different files all have a set of data in them

each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.

View 9 Replies View Related

Open Multiple Files & Copy From

Jan 2, 2007

I want to know if its possible to write a macro that will prompt me to open a document, then once open it will copy data and paste it into the working spreadsheet. I have a mini macro that cuts and pastes data elsewhere in the sheet but at present I am manually opening a file then copying all and then pasteing the data which is rather slow.

View 9 Replies View Related

Copy Multiple Excel Files Into One File?

Jan 10, 2014

I am trying to combine 60 separate excel files into one main file. I've been opening each file copying it then pasting it into the main file.However, this is getting tiresome.

View 1 Replies View Related

Copy Cell From Multiple Hyperlink Files

Dec 19, 2007

I have created a Macro that lists and creates links of all the Excel Documents in a Directory (500+). I would like to extract from each of those files data from a single cell on a certain sheet. (The sheet and cell are the same in each of these files). The code I have written opens each of these files, copies the data and pastes the value in the column next to each sheet. This is a very time consuming task because of the shear volume. I feel that there is a better way to do this, I'm just not seeing it. If you could come up with a way to create this as a reference that would be great too instead of having to rebuild the entire list if the data changes. Here is the code I have written.

Sub Test2()
' Select cell A1, *first line of data*.
Range("A1").Select
' Set Do loop to stop when an empty cell is reached.
Do Until IsEmpty(ActiveCell)
Selection.Hyperlinks(1).Follow NewWindow:=False, AddHistory:=True
Sheets("Contact Information").Activate
ActiveSheet.Range("B8").Select
Selection.Copy
ActiveWindow.Close
ActiveCell.Offset(0, 1).Select
PasteSpecial zlPasteValues
ActiveCell.Offset(1, -1).Select
Loop
End Sub

View 2 Replies View Related

Copy & Transpose Addresses From Multiple Files Into 1

Jun 29, 2008

I want to write macro for below requirement.

I have 10 file in a folder and in that there is address, pone and other detail of employees in these sheets it will be static from D3 - D13 rows. Which is of below format:

Original format
Name
Address1
Address2
Phone
Sex etc..

I want to the above data to populate from these 10 sheets to one sheet (new workbook) as columns as below format :

Sl.#, Name, Address1, Address2, Phone, Sex etc...

I want to write an macro to achieve this. Please let me know your views to achieve this functionality.

View 4 Replies View Related

Copy Paste Certain Sections From Multiple Excel Files?

Aug 14, 2014

I have one master excel file (masterexcel.xlsx) and 100 small excel files. The small excel files are saved as M30.xlsx, M31.xlsx, M32.xlsx, M33.xlsx, M34.xlsx....

I want to open the M30 file, copy a certain section and paste it into the master excel file, close the M30 file whilst saving the new information in a file called recording. Then open the next file which is M31, copy a certain section and paste it into the master excel file, close the M31 file and then open m32 and so on....

How do I create a loop for the files so it automatically opens the files in the order M30, M31, M32.......and performs the aforementioned actions.

I have attempted the following for m30 but i need to make it a loop for m31, m32, m33, m34, 35 and so on....

[Code] .....

View 1 Replies View Related

Macro To Copy Multiple CSV Files Into Single Worksheet

May 6, 2014

I receive a daily bath of 6 files (for now lets calls them 1.csv, 2.csv 3.csv etc...)

I have to manually open these select all the data and then paste them into a single worksheet in a different xls file (called master.xls).

I am trying to figure out some vba that will open each .csv file, copy the data and append to the end of worksheet 1 in master.xls. Ideally i would also like it to paste the name of the .csv it has copied the data to in column A of master.xls

Also, the .csv files will not always contain data, occasionally some will be blank.

Both .csv and master.xls will be stored in the same folder.

View 3 Replies View Related

Macro To Select Multiple Files And Copy Them Based On Criteria?

Mar 10, 2013

This is what I am trying to achieve:

1) Prompt user to select a file (or multiple files)

2) Copy the files that meet certain criteria to a folder

My attempt (fail):
VB:

Sub FILES2SFTP() Dim FileNames As Variant Dim I As Integer Dim fso As Variant Dim Data As String ChDrive "G:" ChDir "G:TEST" Data = InputBox("Enter the date", "Enter the date", Format(Application.WorksheetFunction.WorkDay(Date, -1), "yyyymmdd")) Set fso = [code]....
I get error 424 object not found in this line:

If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then

View 3 Replies View Related

Create Multiple Files For Multiple Groups Of Data

May 9, 2008

I have one main Excel file with information (in example file - columns A & B). I want to create 4 other Excel files that will draw from the main one (in example file - columns D, F, H, & J). I want the information in Excel file A, B, C, and D to be continuous information that matches the main file. For example, the letter A matches up with numbers 1,3,4,10,11,13,15,17, and 19 in the main file. When I open Excel file A, I want a continuous list of these numbers. And I want this for all 4 Excel files which draw from the main one.

View 2 Replies View Related

Excel 2010 :: Rename Files In Multiple Folders And Copy To New Folder

Sep 22, 2013

For the last year I have been downloading cash register X1 and Z1 files onto an SD card. Each night's files (X1 & Z1) are stored in a new folder with the naming convention "RP + [DATE]", (EX: RP120910, [YYMMDD]). I have 265 folders! I need to go through each folder, select the Z1 file (I don't care about the X1, X2 or Z2 files) and rename each with the following naming convention: "Z1 + folder_name + .xls". For Example: Folder RP120910 contains the Z1 file named "Z1_T1729.ECR". After renaming, the file should be "Z1RP120910.xls". As the VBA code loops through each subfolder, selecting and renaming the Z1 files, I would like the new files to be placed into a new folder named "Z1Files". Note: All subfolders are currently in a directory named "RegisterFiles". I am using Excel 2010.

View 3 Replies View Related

Copy Data From All Files In Folder

Jul 20, 2014

I want to copy data from column A1:D50 from all worksheets available in my folder regardless of any specific file name,

View 4 Replies View Related

Copy All Data From Different Files Into One Sheet

Mar 18, 2007

Here is my problem:

Every month I have *.xls files containing one sheet with different data.

I tried to make a macro whose job was to copy all data from different files into one sheet but i failed.

Please tell me is there some kind of macros which will copy all data sheet from all files into one sheet and to detect every next empty row to paste the information there?

View 7 Replies View Related

Open Files & Copy Data Between Workbooks

Sep 15, 2007

Simply trying to copy data from one worksheet to another. The source sheet is an excel file exported from an Access table. I recorded the macro using the recorder in Excel because I am no programmer, but when I try to run the code, I get this error:

"Code execution has been interrupted" ...and the Range I tried to select in the source file is highlighted by the Editor.

Is the source file protected somehow?

My ______________________________________________________________________________

Private Sub Workbook_Open()

ChDir "P:Databasesdownloads"
Workbooks.Open Filename:="P:Databasesdownloadsheadersflat.xls", Origin:= _
xlWindows
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select
Selection.Copy
Windows("ExcelTool.xls").Activate
Range("A1").Select
ActiveSheet.Paste

View 9 Replies View Related

Multiple Files Of Data To One Spreadsheet?

Aug 20, 2014

I have about 7000 Excel files that I need condensed to one file. The data shown that I need in example one. In this example the data needed is in column B20 then B3-B19. My problem is the data in B20 is sometimes above or below.

In the other attached file(ExampleOutput) is how I am trying to get the data outputted.

Do you think that a macro/script con go thru all 7000 files automatically in a row to do this?

View 7 Replies View Related

Deleting Data From Multiple Files

Apr 21, 2008

I have to delete data from D15 to AZ129, D168 to AZ282, D312 to AZ426 in 46 excel files, saved in the same folder. I go through the process manually by opening each file and then deleting data.

View 14 Replies View Related

How To Use Multiple Sheet Data Files

Aug 19, 2013

I want to have a primary sheet that refers to two another sheet in the same document.

Basically, the person using the spreadsheet will tell the first sheet what data they're looking for from within the dataset contained in the second sheet and the third.

The first sheet will then have an area which it outputs which data matches the criteria.

Here's some specifics. It's for Pathfinder Deities. The user will input which domains they wish to use and the sheet will output which deities, if any, will be appropriate to select.

The second sheet contains all the Cleric Domains and which Deities are associated with them. The third sheet contains the alignment of each Deity.

If it was not obvious, in the first sheet, the player will indicate which Domains they wish to use for their character as well as the alignment of the deity they wish to use. Once they've indicated what their choices are, the first sheet will show which deities are available given their choices.

I'd prefer to do this without using macros, but if it's easier to use them, then I'll just have to go for it.

The screenshots are too large to post, so I'll just post my project: [URL] ......

View 1 Replies View Related

Compare Data Between 2 Files And Copy Unique Rows?

Jun 24, 2014

I need creating a macro which compare the values of "Column B" of attached both "Sample1" and "Sample2" excel files and if any unique value found in Column B of "Sample2" file then the entire row should be get copied in "Sample1" file after row count.

For ex. the rows colored as yellow in "Sample2" file are unique and should be get copied in "Sample1" file.

View 3 Replies View Related

Extract Data From Multiple Closed Files

Jul 28, 2014

The below article explains exactly what I am trying to do but the formula in step 5 doesn't seem to work. I keep getting an #REF! Error.

[URL].....

I am not sure if maybe I'm typing in the quotations wrong or if the formula doesn't actually work.

View 2 Replies View Related

Pulling Data From Multiple Excel Files?

Jun 3, 2013

I am trying to use the following formula to pull out data from multiple excel files in a folder called "Certificate".

='D:SSR Sec and Techcertificate[STUDENT 2.xlsx]Student Record'!$B$10

='D:SSR Sec and TechcertificatePath
[STUDENT 2.xlsx] File Name
Student Record'!$B$10 Sheet name and Cell reference

The formula works without any problem. I want to replicate the formula to extract the same data in multiple excel files. In this case only the second part of the formula needs to change to "STUDENT 3", "STUDENT 4", "STUDENT 5" and so on. I have created a column in excel with those values. I am trying to use the cell contents in the above "formula", but I cannot seem to replace this value in the formula. Needless to mention that I tried to drag the formula, but it does not work. I am attaching the two excel files.

View 3 Replies View Related

Search Through Multiple Excel Files And Get Data?

Mar 10, 2014

Currently using the following code to "pull" a range data from a closed workbook.

[Code] ......

This works well if I know which workbook and sheet I will be getting the info from. What I would like to do is add a function that searches through a few workbooks looking for a worksheet name that matches a value in a cell in my original workbook.

ie. Workbook 1, cell A1 = "Jelly"

search through excel files for the workbook that contains the worksheet named "Jelly" and then copy a range from that worksheet back to workbook 1.

View 2 Replies View Related

Data Import Automation - Multiple Csv Files

Dec 6, 2009

-I receive files everyday by email and saved in a folder C:TEST
-each file saved by name Name+daily date
•( like: sale_20091214, sale_20091215, sale_20091216 )
-file is in csv/Comma delimiated format
-each file have 7 columns A to G and contain 256 rows
-i only need 7 or 8 rows & only need value in Column 'F'
-the rows i need are going to be same each time
--------------------------------------------------------------------------
I want to save automated data in a file name: MonthlySale located in c:
Fore each ROW data should be saved in new column next to last saved column.
.
Example:
data from file sale_20091214 should be saved in column B,
sale_20091214 should be saved in column C,
sale_20091214 should be saved in column D and onward.

View 8 Replies View Related

Code To Pull Data From Multiple Files?

Feb 16, 2010

I have the job of producing a survey in Excel and collating the results anonymously, to help with this I'm looking for a chunk of code that will enable me to pull a specified range of data from all the files in a particular drive with a filename starting with a specified word and insert them all in to the same blank sheet.

View 6 Replies View Related

Importing Data From Multiple Text Files

Nov 22, 2006

I have about 1200 text files with data regarding different machines.These file contain a line called 'Validation date" and also the programe number on different line.

I need a macro which will extract this date for each program number and write in excel in two columns like program number and validation date.

I have tried with some of the macro help available on this site,but I have to do this one at a time.The time required doing this way is same as going in each text file and copy/pasting in excel.Is it possible to automate this process.

View 9 Replies View Related

Exporting Data Into Multiple Text Files

Jul 29, 2006

I have 10 rows and 3 columns or words(data). What I am trying to do is export this data one row at a time so that I end up with 10 text files. Each row needs to be inserted into 3 variables within my text file. (Variable1,Variable2,Variable3) and then saved. Each saved text file needs to be named Variable1-Variable2-Variable3.txt. End result should have 10 text files that are named corrosponding to each row of data and each text file should also have the 3 variables replaced with the corrosponding row data.

Right now I have to manually rename the text file (Variable1-Variable2-Variable3.txt) and then manually open the text file and select EDIT-REPLACE and insert the data 3 times. I have to do this for many many text files and it is becoming monotinous.

View 9 Replies View Related

Export Data Into Multiple Text Files

Aug 28, 2007

Exporting data into multiple text files

My situation is the next:
I have one columm with 70000+ rows (starts from B3 to the final).
I need to copy the data every 10 rows and save it in multiple txt files, example:
B3:B12 ----> 00001-00010.txt
B13:B22 ---> 00011-00020.txt
B23:B32 ---> 00021-00030.txt
B33:B42 ---> 00031-00040.txt

and so on.....

the macro (TextMe.xls) of xlite almost does what I am looking for.
But, how to change it in order the macro does what I need?.

View 9 Replies View Related

Copy Data From Selective Rows From Different Files To A Single File?

Jun 8, 2014

I would need only the first row data to be copied into a master file in column A (row A from each file to column A, column B.... etc - basically transpose value into master file)

View 1 Replies View Related

How To Extract Data From Multiple Files Into New Sheet Template

Jun 15, 2014

I have .Raw data in 3 different configurations, which can be opened in Excel.

I want to automatically extract relevant data (Columns) from these 3 different types of .Raw data before running analysis using chart using Macros.

Now here is the problem, Data from the .Rawdata needs to be accumulated. That is, I have multiple sheets of excel, which I have to open manually and extract specific data from individual columns onto another sheet to accumulate every data before running analysis.

How to tackle this situation?

1. Able to detect the right type .Raw data for use in Excel.
2. Extract data from many excel onto one main sheet, using Macros.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved