I have tried a few of various ways you can set this up to run in a much cleaner format than 'Macro Record' will produce. Trying to use code techniques I have found here this is what I have assembled but cannot get it to execute properly.
With ActiveSheet
.UsedRange. Cells.Value = .UsedRange.Cells.Value
.PasteSpecial xlPasteValues
Application.CutCopyMode = False
End With
Sheets("Sheet4").Range("C:C").Copy Destination:=Sheets("Sheet4").Range("F:F")
I am copying "C" column which has cell values containing Date/Time but displays the date only. I am trying to copy the value only from column "C" over to "F" but it wants to look through a million rows instead of only the used range.
How should this be properly setup?
The functioning code above this in the marco is:
Sub Lot02()
Dim ws As Worksheet
Dim wsNew As Worksheet
Set wsNew = Worksheets.Add(After:=Sheets(Sheets.Count))
Sheets("Sheet1").Range("AP:AP").Copy Destination:=wsNew.Range("A:A")
Sheets("Sheet1").Range("AQ:AQ").Copy Destination:=Sheets("Sheet4").Range("B:B") ..............
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
I have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept() Dim Dept As Range
With Sheets("Master") For Each Dept In .Range("I2:I1000") With Dept
I keep getting error 92 - "For loop not initialized".
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
Code: Range("a" & Cells.Rows.Count).End(xlUp).Select Range(Selection, "a1").Select For Each cell In Selection If Not IsEmpty(cell.Value) Then If cell.Value "2012*" Then cell.Copy cell.Offset(0, 5).PasteSpecial End If End If Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
I need a macro to copy and paste data from Col A to Col B. But I need it pasted 1 row up. In other words if A6 has data I need it pasted in B5 and Bolded. I got a start but don't know how to finish.
Dim ii As Long For ii = lastrow To 6 Step -1 If Not IsEmpty(. Range("A" & ii).Value) Then ****.Range("A" & ii).Copy***** Next ii
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
I am trying to copy a range of data from one sheet to another. I can almost get it to work. Here are the values of the variables I use in the code below
Code: cal_col_counter =5 col_counter=1 and no_of_rows=249
I would like if someone could tell me what formula to put in the cells in Column E so that I can copy it to all cells in Column E and get the right results.
I want to search a range set in column a. from a1 to a200. When it finds a cell that has some sort of value in it (for example cell a29) i want it to take what is in cell a29 and set sell z1 = to whats in a29 and then continue searching for other cells that are not null in column A.
I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test() Range("I1").Select Selection.Copy Range("A2").Select ActiveSheet.Paste End Sub
I have trying to develop the following macro (see below) which bases adds a column on another worksheet based on a cell value, this part works. I then want to copy the formulas from the column to the left of the inserted column, and this where I am struggling.
I found a question posed by 'TBW MK' and tried to adapt that. I can't work out how to express which needs to be copied - currently shown as Range(), given that it is a variable
Sub New_World5() Sheets("Process").Activate Dim ColNo As Integer ColNo = Worksheets("Input").Range("H2").Value With Sheets("Process")
Right there data in cell A1 lets say LTP BY001 and then the next data in column A is LTP BY002 in cell A9. What I need to do is copy LTP BY001 from cell a2-A8 and then LTP BY002 From A10 until LTP BY003 appears lets say A15. Therefore need LTP BY002 copying from A11-A14. I need that to go right the way down the workbook at everytime their is a number change.
I need a macro that will start in a cell, copy all cells below it (CTRL+SHIFT+ARROW DOWN) with data in that column, create a new sheet in a seperate workbook, paste only the values, return to the original workbook, move one column to the right, repeat the copy/paste until the cell it moves to is empty.
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
I have a script that copies data to files based on many cells contents but where I am having a problem is creating series numbers for each file.
File-01.txt File-02.txt .. File-100.txt
In my current code I copy files to folders by date and each folder I need series of files (Lab Testing series)
In column A1:A100 I have a series of numbers 01, 02, 03 ...100
Column B contains the Files to be saved C:LAB2012Jan1file-01.txt C:LAB2012Jan2file-01.txt C:LAB2012Jan3file-01.txt C:LAB2012Jan4file-01.txt ... .. C:LAB2012Dec31file-01.txt
So this works fine
I now need the Script to do is to loop to Column A and select Cell 2 and do the File Copy again on the Next series
When Complete repeat until it reaches the end of column A
Since my Cells are populated by all the data in the workbook I thought at the end of my copy script I would take the next Cells data in A and put it in Cell H8 where all the constants are for the file names.
I have a long list of values in column F of my worksheet. These values appear in random rows for example: cell F3 is 27, cell F9 is 7, cell F13 is 27, cell F20 is 9 ... The data is not evenly spaced any specific number of rows apart, but there are spaces (rows which are blank in column F).
I would like to put all of these values in column G but without any blank cells, and keep the order the same as well. So using the above example, Id like a way to make cell G1 read 27, G2 read 7, G3 read 27, G4 read 9.
Column F could be a very long column im not sure exactly how long as the data is being put in periodically. Some sort of formula that I could just drag down that would read the values from column F and put them in column G with no places would be ideal.
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
I have been struggling with a way to use an IF statement that determines if a cell in column B = 1 then copy that cell and the two cells next to it to a cell starting in range B50. Once the condition is true would want it to copy another below and so on.
B C D E D 1 E10 Rear door failed BL OK 2 B4 Clearance light inop. KL OK 2 C1 Fire extinguisher date expired KL Ok 1 E1 Bumper falling off BL NO
The first and fourth row have a "1" in column B. So as a result these two rows meet the condition and want to copy just the cell in B thru D. Results would look like below
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
I have a column with data but some rows are empty, i want the empty rows to be filled with exact data from the upper cell so that no row remains empty. How can this be achieved?
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
