Here is what I am trying to do:
Copy the correlating Row from (Worksheet DataDump Column AJ) to (Worksheet Calc Column A)
IF
Worksheet DataDump Column B ends in 3
Here is what I got so far..
Code:
Sub copyWorkPackages()
Dim WPThree As Range
For Each WPThree In Range("DataDump!B2:B" & Range("DataDump!B" & Rows.Count).End(xlUp).Row)
If Right(Range("DataDump!B2:B" & WPThree.Row), 1) = 3 Then
End Sub
I want to copy range A to B, but I don't want to copy the whole column of A. I want to copy the data on A where B ends. For instance, If Column is A:50 and B is B:40 then I only want to copy A:40. I've trying the code below, but for some reason it deletes the range. Once the code is finished there is nothing in A or B.
Range("A9:A" & Cells(Rows.Count, 2).End(xlUp).Row).Copy
Range("B9").PasteSpecial (xlValues)
I am having a with a controlled loop. If the loop is on the last pass and an error occurs, it goes into a never ending loop. Once the error portion of code is excuted, the code resumes to the same line. I'm not sure how to solve this problem. I have attached a sample file with all code if needed.
View 2 Replies View RelatedPrivate Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
If Not Intersect(Target, Range("e273:g284")) Is Nothing Then
Set rng = Range("e273:g284")
ElseIf Not Intersect(Target, Range("g273:j284")) Is Nothing Then
Set rng = Range("g273:j284")
ElseIf Not Intersect(Target, Range("j273:l284")) Is Nothing Then
Set rng = Range("j273:l284")
End If
Application.EnableEvents = False
If Not rng Is Nothing Then
If Application. CountIf(rng, Target.Cells(1, 1).Value) > 1 Then
MsgBox "This vehicle is booked out at this time"
Target.ClearContents
Target.Cells(1, 1).Select
End If
End If
Application.EnableEvents = True
End Sub
the code is perfect for what i need it to do but the only problem i have is that the codes roll on from each other... I.E:- E273:G284 - G273:J284 - J273:L284. first ends in G second starts in G, Second ends on J third starts on J. for some reason this doesnt work, the first code gets the prority and works but the second works in all the columns except the first one.. in this case the first code is fine, second actually works from H not G and third works from K not J
I have a User Form with 2 groups of 3 radio buttons let's say. The user must choose one button from each group, then press "GO" which runs specific code depending on what buttons they pressed.
How do I make the variables public or static so that after both radio buttons were selected, another seperate procedure in the same module (The GO procedure) can know what selections were made so it can run code based on those selections? In this example, there are only 2 groups of three radio buttons, but in reality I have 30 buttons and it keeps growing so I need the most direct/simple way to solve this.
For Example:
UserForm1
Radio Button Group 1:
Button 1
Button 2
Button 3
Same UserForm1
but now here is Radio Button Group 2:
Button 4
Button 5
Button 6
I need to know which buttons the user clicked from Group 1 and Group 2 after they finished both their selections from each group, and then run code depending on what combination of buttons have been selected. I'm good to go with the If/Then code to decide which code to run, I just cant keep the variables from reading as 'Empty' when I try to see what the user selected when pressing GO and running that procedure.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I want to subtract a time value which starts today and ends the next day. Is there a way to achieve it as i get error when i do that.
View 3 Replies View RelatedI have a print macro that runs from a command button, when I use it the workbook goes to the sheet printed. Can I somehow make the workbook go back to a sheet of my choice? Here is the macro, The command button is on a sheet called Control Center, can I return to that sheet or stay at that sheet when I print?
Code:
Sub Button16_Click()
Sheets("OBS1").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
End Sub
I've got an excel sheet that lets people choose between 2 choices. I'm using scroll bars to make it easy for them to choose and visualize their preference with as little mouse clicks as possible. The scroll bar is only one sided though, meaning it starts from a min value to a max value.
I would like a scroll bar with a of 0, with the value increasing positively as the user scrolls to the left, and the value also increasing positively as it scrolls to the right.
I have an Excel file with text records, 1000s of lines long Trancriptions of Customer sales reps and Customers, or Distributors. All data is in Collum A.
Each Record has 7-10 Entries
______________________
BILLNUM : 060501
ORIG : 12345678909090
REP : 45672222222222
AREA : LK787878000000
SD : 060401
ED : 062025
COMMENT : CUSOMTER CONVERVERSATION WITH REP
C:HELLO
R:HELLO
C:MAY I HELP YOU
R:BALANCE PLEASE
etc......................
If the user adds 3 new lines, to the data table, – the Series Value Ranges should increase by 3 lines – AUTOMATICALLY(!) to avoid the user to full-around with the chart. It should take care of the 4 Series Ranges and also of the Range for the X-Axis Category Labels. As far as I recall, the way to accomplish it, is by NAMING the ranges with COUNTA etcc BUT, here – the last row is an empty rowc
View 2 Replies View RelatedI need to create a report on each friday as well as on every last workday of a month. I have to display both weekly and monthly data on the same graphs and I always arranged the week ends and month ends myself, but this is taking a lot of time.
So I need a chronological list of of week numbers and month names based on the date of Friday of a week or last workday of a month.
Input:
A1 - either month name ("MMM", Jul, Aug, Sep) or week number (1-52)
A2 - year number (2014)
Output:
For example, for 30 in A1 and 2014 in A2 it should look like this:
BD
BE
BF
BG
BH
BI
BJ
BK
BL
BM
1
May
23
24
25
26
Jun
27
28
29
30
And this should strech back all the way back to B1 in which I need to have 31.
Note if a month ends on last workday of a month the week number should come first and month name second.
I am currently working on a project which at various times does 2 different things. These things are to be done on a "PROTECTED" (UserInterfaceOnly:=True ) worksheet.
The first is a Range.Replace command.
The other is a Hyperlinks.Add command.
Now when I'm testing ( typically the worksheet is not protected ) everything works like a champ. But as soon as I protect the sheet the following scenario happens.
1. The replace DOES NOT work.
2. The hypelink.add DOES NOT work.
when the sheet is protected it ends up throwing a runtime error ( 1004 ) "Protected Sheet error" the real odd thing about this is that it doesn't throw the error on the command itself. On the hyperlink the error happens about 3 command further along in the flow............
I have many worksheets which ends with the word " data". Is there a way to delete all the data sheets at one go through VBA code.
View 3 Replies View RelatedI have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. Description of Project, WBS Code, Rate, Employee Name, Premium, Invoice, Status, Total Cumulative Hours, Total Cumulative Amount from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns Total Cumulative Hours, Total Cumulative Amount are total columns so when they are copied from Sheet 1 to Sheet 2 their values should be copied as opposed to the formulas
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View RelatedI have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies View RelatedI have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions.
2) The To Dos for each project are NOT arrange in sequence by dates.
3) Number of project will increase over time, therefore the number of worksheets will also increase.
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I have 2 worksheets : "version" and "final".
In final worksheet, I have in column H starting with H2 some cells with text. I can have until 99 cells.
I need to copy this cells into "version" worksheet, in row 3 starting with range D3 and 3 rows to the right ...
"final" worksheet........................................."version" worksheet
data from range H2.......................................data to range D3
data from range H3.......................................data to range G3
data from range H4.......................................data to range J3
etc...............................................................etc.