Copy/Paste Filtered Results Less Header Row
Sep 2, 2006
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
View 4 Replies
ADVERTISEMENT
Feb 12, 2014
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
View 5 Replies
View Related
Oct 16, 2007
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
View 7 Replies
View Related
Aug 20, 2006
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A
row 1 ABCDE
row 2 FGHI
row 3 Party Name:Abcd
row 4 JKLM
row 5 nopq
row 6 STUV
row 7 Party Name:ryz
row 8 Party Name:mno
row 9 XYZ
I want the results as below:
Column A Column B Column C Column D
row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
View 9 Replies
View Related
Aug 22, 2006
I have a vertical list of data which is sorted in to "Regions" 1 to 7 there could be up to 25 instances of each Region, but I have no way of knowing.
I want to be able to select each Region and place it in it's own column.
View 9 Replies
View Related
Sep 25, 2009
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
View 9 Replies
View Related
Jul 6, 2014
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I
1 First I filter only Yellow cells
2 then I copy that Filtered cells
3 after that copying that filter cells I did Paste in same rows in J and K column
View 5 Replies
View Related
Dec 31, 2013
I am trying to copy and paste values from one column to another on the same sheet
E.g Column A
A1-Red
A2-Blue
A3-Green
A4-Red
If i filter to red and copy cells A1 and A4 and paste into column B, instead of pasting it into cells B1 and B4 it pastes it into B1 and B2...
How do i get it to paste on the same row?
My sheet im working with has thousands of rows, some need to be pasted, others need to be left as they are
View 3 Replies
View Related
Aug 5, 2014
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
View 5 Replies
View Related
Oct 22, 2008
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
View 9 Replies
View Related
Jun 27, 2013
Is it possible to copy text from a Excel worksheet and paste it into the custom header or can you just type in the three boxes?
View 1 Replies
View Related
Apr 10, 2014
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
View 5 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Nov 6, 2006
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats)
Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents)
Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
View 11 Replies
View Related
May 31, 2013
I have this macro which does a really nice random selection, the problem I have though is that it deletes everything except for the result set. How to adjust the macro in such a way that instead of deleting the the original data, it copies and pastes the result set to a new worksheet?
Code:
Sub RandomSelect()
Application.ScreenUpdating = False 'disable screen updating to avoid screen flashing
Application.DisplayAlerts = False
Dim wbk1 As Workbook, wbk2 As Workbook, lstRow As Long, wks As Worksheet, startCut As Integer, selNum As Integer, lstCol As String
Set wbk1 = ActiveWorkbook
Set wks = wbk1.ActiveSheet
[Code] ......
View 1 Replies
View Related
Jun 13, 2014
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies
View Related
Feb 19, 2009
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
Go to worksheet z and press the command button.
I got the code from this site: ...
View 6 Replies
View Related
Jul 1, 2013
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
View 2 Replies
View Related
Feb 22, 2014
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code:
Sub CalculateDeviceFailureTimes()
'
' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System
'
Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
View 3 Replies
View Related
Jun 12, 2009
Is there to copy my vlookup results into another workbook?
I put together a marco that will select an range and paste it into a new document, however my vlookup results will not copy over.
Is there a way to extract my vlookup results and paste it into another workbook with the enclosed vba code?
Private Sub CommandButton1_Click()
'
' Macro2 Macro
' Macro recorded 4/24/2009
'
Columns("A:E").Select
Range("A2").Activate
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Feb 2, 2009
I have a monthly work phone bill which I receive as an Excel document. I have to pay for personal calls and want to create a list of personal numbers which can be filtered and the costs summed. Prefereably an add in would be best. Possibly 2 icons, one for adding my personalised numbers (usually under 10 numbers). This could be saved to my home drive on the network so I can run the formula from any PC on the network.
The other icon would be to run the report and do the calculations. So it only really looks in 2 column (mobile num, cost).
View 14 Replies
View Related
Sep 18, 2009
How do I rank filtered results? I do not wish to use VBA if possible.
View 4 Replies
View Related
Oct 20, 2007
I am trying to sum the results of a filter via VBA but cannot seem to get it right. I have the code to count the number of "active" rows, now to get an average I have been trying to use similar code to get the sum so I can divide the sum by the number of rows not filtered out. I get the error "Unable to get the Sum property of the WorkSheet function class" This is the code I have butchered:
Set R = ActiveSheet. Range("d1"). CurrentRegion
Set R = R.Offset(1, 0).Resize(R.Rows.Count - 1, R.Columns.Count)
For i = 1 To R.Rows.Count
If Not R.Rows(i).EntireRow.Hidden Then
intCountCancelled = WorksheetFunction.Sum("Cancelled") ' cancelled is a named range. This is the line its failing on
End If
Next i
View 5 Replies
View Related
Feb 22, 2012
Based on filtered data I want to produce a result for the Average trade gain.
Lets say I have 100 rows of data, and based on filtered settings the rows reduce to 5 rows of results.
Of those results I want to find an average of all the positive values (trading profits) and ignore the negative ones.
$2000
$1500
-$700
$4000
-$1000
The answer should be (2000+1500+4000)/3
The need for filtering makes this problematic. I am inclined to use SUBTOTAL as it applies to filters rows only, but I can't see how to use an IF statement within it.
In addition to this I would also love to know how to subtotal all positive values without averaging.
View 5 Replies
View Related
Nov 10, 2006
I have a list of data entries. I use auto-filter, to view them according to which category they belongs to. However, when I wanted to sum just the quantity associated with the criteria which I am filtering, I couldnt find a formula which does that
View 2 Replies
View Related
Feb 21, 2008
I am populating a 2nd temporary worksheet from a primary using autofilter which works just fine. I have been asked to set it up to populate the 2nd sheet using the same autofilter criteria across two or more of the primary sheet columns. I have been looking through the forums and found an article in which this process is described, #2 The power of Autofilter in VBA - Part 2, and I would like to ask if this will do the job for me.
I did attempt to create my own code, but it didn't work with a loop that I created. I do use input boxes to gather criteria from the user. I have put a copy of my code below which doesn't work, but need to know if the code in the article mentioned above will work?
Option Explicit
Private Sub UserForm_Initialize()
On Error Resume Next
' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl
End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, _ ................
View 4 Replies
View Related
Jul 31, 2008
I have designed a Macro to use an Advanced Filter to search for specific criteria in different columns. I would like the results to bold or highlight the cell if it meets the criteria for the advanced filter. There are multiple numbers in each row that are associated with each record, and I would like to be able to see which of these triggered the filter to work for that row by bolding or highlighting the individual cell.
View 8 Replies
View Related
May 15, 2014
I have a sheet of data that I can filter (e.g. only show male pupils).
On the next sheet I want to display the list of filtered results with no gaps.
As the user will be able to select which column of data to show from the first sheet I am referencing it as follows:
INDIRECT("'Progress Matrix'!"&ADDRESS(MATCH($B$6, 'Progress Matrix'!$A:$A, 0)+1,
MATCH(C$6, 'Progress Matrix'!$1:$1, 0))&":"&ADDRESS(300, MATCH(C$6, 'Progress Matrix'!$1:$1, 0))))
(However this formula no longer seems to work as I think I changed something).
I've tried to incorporate
SUBTOTAL(3,OFFSET(A2,ROW(A2:A100)-ROW(A2),0))
to only show filtered results but with no success.
Progress Tracker.xlsm
View 6 Replies
View Related
Jan 5, 2014
Excel 2010 windows 8
I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.
On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.
View 1 Replies
View Related