AutoFilter Table & Copy Results

Jan 29, 2008

The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.

Sub AUTOFILTER_withouthead()

' AUTOFILTER_for_drop Macro
' Macro recorded 1/27/2008 by DD
Dim ws As Worksheet, wd As Variant
Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value))
Set wd = Worksheets("Destination").Range("A1:F65000") ...

View 3 Replies


Copy And Paste Autofilter Results To Different Sheet?

Jul 1, 2013

I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.

In the results I would like the header row if at all possible, but I can always just make it part of the macro.

View 2 Replies View Related

AutoFilter Copy Code Producing No Results

Aug 9, 2007

I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough

The code is:

Sub GetWorksheet()
Dim filetoopen As String
Dim wb As Workbook

filetoopen = Application _
. GetOpenFilename("XL Files (*.xls), *.xls")
On Error Resume Next

View 5 Replies View Related

Use AutoFilter To Filter And Copy Results To Existing Worksheet

Apr 5, 2013

I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.

Option Explicit
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.

[Code] ............

View 1 Replies View Related

Filter Table And Then Copy The Results Onto Another Worksheet

Jan 17, 2007

now i have filtered data in a table, i want to use the results by printing off a table showing just these and the appropriate rows from other tables on worksheets. these all have a specific ID which is how they are traceable to each other. like a related field in an access database. two tables/worksheets are like so:

Reg No | Rank | Name | Initials | Troop | etc

table 2:
Reg No | JCLM1 | JCLM2 | SCLM1 | SCLM2 | etc

If i were to filter the second table by JCLM1 = YES then i want to create a printable list of all those but also to include the related records from table 1. is this possible?

View 2 Replies View Related

VBA Autofilter Not Returning Results?

Jul 6, 2013

I have a large table which I am filtering 3 times. There should be results but the final VBA filter does not return them until I manually apply the filter. The custom filter is correctly populated with the criteria. The code that I am using is as follows:

Selection.AutoFilter Field:=9, Criteria1:="<>", Operator:=xlAnd
Selection.AutoFilter Field:=10, Criteria1:="=INV", Operator:=xlOr, Criteria2:="=CRD"
Selection.AutoFilter Field:=21, Criteria1:=">=" & DTPicker1.Value, Operator:=xlAnd

The first two filters work fine. The last does not. Oddly it works on some date picker values and not others, even if there are actual results and as mentioned earlier if I stop the program running and apply the filter (without typing anything else) it works fine.

View 5 Replies View Related

Use Combo Box Results For AutoFilter

Dec 21, 2005

I want to use the selection from a combobox on a sheet to set the autofilter. I know it is probably very simple but have not been able to find the answer by searching this forum. Below is the code I am using. It sets the filter to blanks for some reason.

Private Sub ComboBox2_Change()

Range("D9").AutoFilter Field:=1, Criteria1:=ComboBox2.Value, visibledropdown:=False

End Sub

View 9 Replies View Related

Total AutoFilter Results

Dec 30, 2006

I have a worksheet of data that I have created by combining several other workbooks into one using a macro. On this worksheet I run AutoFilter to select certain rows and then copy these rows to another worksheet, again using a macro. How can I get the macro to generate a total for one of the columns? I would like the Sum to be two rows after the end of the column with some kind of descriptor preceeding it.

View 6 Replies View Related

Calculate Autofilter Results

Feb 19, 2008

I have a list of data in Excel with Autofilters. At the bottom of the data set is a row that totals up many of the columns. Whenever I use the Autofilters, the totals at the bottom still reflect the entire set of data, rather than only the filtered data.

Is there a way (using macros, formulas, or something else) to make the totals automatically update to only reflect the data that is visible when using Autofilters?

View 6 Replies View Related

Use ComboBox For Changing Autofilter Results

Apr 9, 2013

I have a problem very similar to this thread: [URL] .... Therefore I have tried to adapt but so far failed.

My requirement is that a userform pops up with multiple comboboxes (in this scenario 3) and once the results have been selected and the user clicks the button "OK" then the autofilter changes to the same as what the selected ComboBoxes were.

So, there are 3 comboboxes so I have tried the following:

[PrivateSub CommandButton1_Click()

If Sheets("Data").AutoFilterMode = True Then Range("B3", Range("B600").End(xlUp)).AutoFilter
Range("B3", Range("B600").End(xlUp)).AutoFilter Field:=1, Criteria1:=ComboBox1.Value, visibledropdown:=False

[Code] .....

View 5 Replies View Related

Search Box That Uses Autofilter To Filter Results Down?

May 14, 2012

I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....


I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".

Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.

View 6 Replies View Related

Vba Autofilter Msgbox If No Results Returned

Nov 2, 2008

I want a msgbox to popup if the autofilter returns no records saying "No records found".

Heres a sample of the
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rfilter As Range 'range to search
Set rfilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rfilter.AutoFilter Field:=1, Criteria1:=strFind & "*"..........

View 9 Replies View Related

Copying Results From An Autofilter To A New Worksheet

Aug 27, 2009

I'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?

View 9 Replies View Related

Assign Autofilter Results To A Range Object

Dec 3, 2008

I have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.

I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.

View 14 Replies View Related

Deleting Hidden Rows Based On Results Of Autofilter

May 23, 2007

I am performing an autofilter within a spreadsheet to display only those lines where a name exists in column A. Then I delete all hidden rows. I am having a problem when the autofilter results in no rows being visible. Here is the code I am using for the delete hidden rows:

On Error Resume Next ' In case there's no hidden cells

With Cells
Set rngHidden = .SpecialCells(xlCellTypeVisible)
.EntireRow.Hidden = False 'Unhide all cells
rngHidden.EntireRow.Hidden = True 'Hide previously visible cells
.SpecialCells(xlCellTypeVisible).EntireRow.Delete 'Delete previously hidden cells
rngHidden.EntireRow.Hidden = False ' Unhide previously visible cells
End With
End Sub

View 9 Replies View Related

Copy Top Cell Post Autofilter And Reapply Autofilter Based On Cell Value

Aug 20, 2014

I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.

E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA

Note: Row 1 contains command buttons and row 2 Headers.

View 4 Replies View Related

Apply A Filter In A Pivot Table And Extract Results In A Table

Jul 24, 2008

I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.

View 9 Replies View Related

Populate Cell Using Two Results From Same Table And Referring To Another Table?

May 23, 2013

I have a workbook with two worksheets,

sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score

sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score

i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.

View 5 Replies View Related

Data Table: Incorrect Results Inside Table

Feb 22, 2007

I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?

View 3 Replies View Related

Table With Autofilter

Jul 1, 2007

I have a table with Autofilter, on B5: J5000. I want to insert a value in cell B2 and the list should shows only the values equal with B2.

View 9 Replies View Related

Create Autofilter Using Validation Based On Table In Another Worksheet?

Feb 25, 2013

Can I validate data based on a list in another workbook? is what I mean to say.

View 2 Replies View Related

Selected Results Table?

Apr 8, 2014

I would like to be able to bring these results into an output, but without other members of the other team members results been seen by other memebrs of the team

View 7 Replies View Related

Results Table To Complicated To Read

Nov 5, 2008

I have attached the dataset. I need the data table to show the total numbers per year with the % change year on year, A column in this table of a year end projection figure for 08/09 and the % change. And finally add a line graph to show each complete year and the 08/09 projection as a comparator.

View 5 Replies View Related

Results From Multiple Sheets To Table

Jan 24, 2010

i have a workbook with 30+ sheets and i want to create a new sheet containing a table from aprox 6 values from the others.

i have done this in the past by typing =(then select the cell from the sheet i want)

while this works it is very time consuming and filling down after i have done 1 row gives the wrong results

View 8 Replies View Related

Compounding Results In A Pivot Table

Mar 3, 2014

In the attached file I have a pivot table created from the data in A:D.

By default the pivot table sums the values for each product (e.g. 18.00 for the sales of Product A). Instead of adding the values for each product I would like to get the pivot table to compound the values for each product. In columns J and K I have shown the results that I would expect when compounding the values of sales and profit for each product. Data for more dates will be added in A:D.

how to achieve this using a pivot table.

View 2 Replies View Related

Finding Results Not In A Table Lookup

Jul 31, 2007

It highlights (with an x) all data that appears in both sheets a and sheet b. However I want it to highlight all the ones that are no on sheetA.

View 10 Replies View Related

Searching Table When Value Has Multiple Results?

Feb 2, 2014

i have a spreadsheet that i use for work which has 1 page that contains all the data for the workbook. on other pages i use this data, and tables, to pull information to those pages or other pages which complete my work in a more timely fashion.

that issue i'm having is when i try to look up specific values within the data page tables and there are multiple values.

i need a way to choose different values rather than the "first" value in the instance of a vlookup which only finds the first value.

in the pictures i have picture 1 (vlookup samples) has a section where i can type in the "office" code and it will auto pull "switch name" and "switch clli" via vloookup.

in picture 2 (switches sample) i have created a table, which is on another page as stated above, but if i try to search for the example "LSGT5" it only returns a switch name value of "LFTYINXFDS0" and there is also a value of "LFYTINXFDS1".

there are many more within the table(for this office code alone) but this is just an example of how i need a way to choose the proper one or somehow have a drop down without having to create a bunch of tables for each office itself.

View 6 Replies View Related

Find In Table, Then Concatenate Results

Jun 13, 2009

My data is pulled in as a table from QuickBooks, so its many rows consisting of many column entries per row. The columns are laid out like:


I currently have a SUMIFS formula that works well for searching the table and finding PO's that are not paid, for a specific vendor, on a day today or before, and it ads the amounts together and returns the sum opf the amounts for me.

Now, what I would also like to do is to have it return the PO numbers as a concatenated text string all into one cell. So, it shoudl find all the rows where the due date is today or before, the PO has not been paid, and the vendor is a specific vendor, and then concatenate all of the PO numbers into one cell of my choosing.

This sounds just like the SUMIFS function, however, the SUMIFS function adds the values and places the sum in the cell of my choosing. For this, I would like the values found (which are text values) to be concatenated into one cell.

View 9 Replies View Related

Search Table For Conditional Results

Mar 1, 2007

I have a table which details an applicable fee given a level of performance. However the levels of performance can be any value and the fee level table which i need to look up gives conditional ranges such as if (out performance is) >4.5% and <5.00% then applicable fee will be 0.7%. However my table is large enough that using a nested IF formula seems unfeasable. I've attached a sample of what i mean which explains it better.

View 2 Replies View Related

Order Results Of Table Extraction

Jun 12, 2007

I am finding that I am often using Max(if(... formulas to pull in Staff ID's that have seen activity in a large data dump. I then use a VLOOKUP to return name based on ID.

Trouble is, the names end up out of order. I want to be able to order them in one of two ways - either by work done, or alphabetically.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved