I have many excel file and I will need to gather all the data of those multiple excel into 1 single excel as per condition.
But the data that I want to get from all the excel that contains data are the same. All the excel file are in a folder, so it will loop the excel file in that folder chosen by the user.
Example:
Excel 1:
I need to get the cell range: RIGHT(Range("B9"),7) and paste into A1 of the master excel.
Then scan on the column D till last row, and copy the data from last row of D to B1 of the master excel.
Then scan on the column AA till last row and copy the data from the last row of AA to C1 of the master excel.
Then loop for the next excel file and do the same but add the information to master excel in row 2 and on.
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code: ' CollectMasterData Macro ' Sub CopyToMaster() Dim wkSht As Worksheet Dim DestSht As Worksheet Dim DestRow As Long Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
We have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)
I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).
The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.
I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?
In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).
Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.
transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB: Sub Copypaste() ' ' Macro8 Macro For Each ws In Worksheets
I am trying to write a macro that will go to one workbook after another, select a large range and paste it to a master sheet, then repeat for the second workbook but this time paste in the next available row.
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A B C D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO ID Date Customer Start Time End Time Trucks Supervisor
1 A 2/25/2014 Customer 1 10 1 3 ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO ID Date Customer Start Time End Time Trucks Supervisor
1 B 2/25/2014 Customer 3 10 1 3 RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO ID Date Customer Start Time End Time Trucks Supervisor Result
1 A 2/25/2014 Customer 1 10 1 3 ABC Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets() Dim ws As Worksheet Dim lastRng As Range
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated ) one is worktype 2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from. 2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook 3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II: Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters() Dim CurrentFile As Workbook Dim wbOpen As Workbook
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I work for an insulation company and we have all of our jobs, completed and in progress, on a master worksheet.
Currently there are 437 rows of data (but will increase), and columns A to N with various bits of data.
Row A is a location field - there are 5 locations currently.
I would like to be able to add a new line at the bottom of the master sheet, and then this automatically identifies the location from column A and which worksheet is it to be copied to and then copies the data from that new row to the bottom of the relevant location sheet.
I would also like to be able to update the data in the existing entries (e.g. when a job has been assessed initially, and then completed, I need to put the dates in) and for this to update on the relevant worksheet.
Each worksheet has the same format (columns A to N have the same headings in row 1, then data to begin in row 2).
I wouldn't say I'm an advanced Excel user (otherwise I wouldn't be asking this question), but I do have a fairly good working knowledge of it. Currently using Excel 2010. Would ideally like to be able to do it without VBA as it needs to be uploaded to Google Docs and for others in the company to access online.
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..
every job is on its own row and contains a unique ID.
is there a way i can merge their data in to the correct row and column(s) on the master sheet?
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I have csv files auto generated (with date stamp in name) and saved in a specific folder everyday. I need to find a macro that will copy the row(s) every day and add to the next empty row in the master excel file. Some days the csv file may have a single row of data and on some other days it may have multiple rows of data to copy and paste.
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I have a workbook that I use as a master and only 2 people should be allowed to change it. It is locked by a password and if opened by anyone than all others can only see as read-only. What I need to learn how to do is have that master version with its own password and then maybe a copy or shortcut that is read only with its own password and updated (linking??) as changes are made to the master version.
I have two sheets. One is a Master which has all of the following information in each column. Product ID = A, Product Name=B, Price=C, Category=D ,Product Description =E,
The other sheet Is a updated product description.
Now I want to Be able to copy and add the new descriptions into the Master but not sure how to add them so they will fall into the proper spot according to the Product ID... There are not descriptions in the Update sheet for all the Product IDs in the Master.
I am responsible for compiling a compilation of my company’s data from each source to a Master workbook, I need a macro that can be run from each divisions workbook (all are identical apart from the name and date) that will copy entire rows from 3 tabs into the same tabs on my master workbook.
The following is the criteria. Master workbook name "All ships compilation"
Tabs are identically named on both reports Cruise Report YTD Tables & Slots YTD Staff Hours
Cruise Report YTD, I need to copy rows 7 to 371 and paste them into the same tab “Cruise Report YTD” on the master report “All ships Compilation”, starting at the first blank row available.
Tables & Slots YTD I need to copy rows 8 to 372 and paste them into the same tab “Tables & Slots YTD” on the master report “All ships Compilation”, starting at the first blank row available
Staff Hours, I need to copy rows 2 to 100 and paste them into the same tab “Staff Hours” on the master report “All ships Compilation”, starting at the first blank row available
