I have a workbook with 2 sheets containing data in many columns in Sheet1 as well as Sheet2. I need to compare Sheet1 data in column F with data of Column C in Sheet2.
If column F in sheet 1 matching with Column C in Sheet2 then retrieve the value of Sheet2 Column B,C,D & E to show in Sheet1 H, B, C & D respectively. I have attached the Excel workbook.
I have two worksheets, in worksheet1 i have a table containing two columns, " names" and "projects". In worksheet2 is where I ask for the name of the project. How do I retrieve all the "names" in worksheet2 that have the same "project" to worksheet1.
I know I made a similar thread in here, but that one was answered quite quickly. Then I learned that my question was written quite wrong and so the answer didn't help me much. I thought about rephrasing the question, but I read that this is a one question on one thread forum.
I need to find and match patterns of strings in a column and fetch data from the adjacent column. I've attached a sample workbook with my sample data.
How can I find the appropriate matching pattern and fetch and fill data from the adjacent column from my source table to destination? I tried the string functions available and used SEARCH function to match the pattern and check whether it is available. However, when the pattern is found, how can I fetch the adjacent column ?
My attempt to code a formula using SUBSTITUTE, MID and SEARCH functions. Below is the monster formula I wrote - it works and returns 1 when the pattern is found.
Formula:
I need to return the matching pattern that is found. And with it the corresponding adjacent cell's value.
I need a macro that will ask for a crew # and then select all the rows off another worksheet that contains that crew #. Then take the selected rows and copy them to the active worksheet for reporting.
I need to retrieve the name of a worksheet for a product.
Example
Workbook1 contains the Product number in column A, i want to enter a formula in column B that will search column A in all the worksheets in workbook2 for that product number, and retrieve the worksheet name that the product number is in
Creating a formula to match two columns (D & H) and if there's a match, I wnat it to produce the value that's in column E, in column J (where the fomula will go).
In column A I have client names and columns B to P I have numerical data and in column Q I have a formula which gives me a percent, i am trying to think of a way/ a function that will return for me the client names when the value in Column Q is >=100%. It seems like it would be some type of reverse Vlookup.
I would like a formula to lookup a value across worksheets and if found return the worksheet name that coresponds to that value. I do have this formula below but it will not retrive the correct worksheet name if there are duplcates values.
So I tried to use the define names formula method:
Col_B =N(INDIRECT("'"&XWSLST&"'!B"&(2+MOD(S,N)))) N =8 S =ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1 WSLST =Sheet1!$A$2:$A$3 XWSLST =T(OFFSET(WSLST,INT(S/N),0,1,1))
and modified the formula into this manner: =INDEX(WSLST,MATCH(TRUE,COUNTIF(Col_B,B2=S)>0,0),COUNTIF(B$2:B2,B2))+1
I left a sample workbook below that in column E are the values that I'm expecting.
I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
I need to query a master spreadsheet and pull out all the rows on it that have the same name as I have in cell A1 of my spreadsheet
e.g.
Myworkbook, sheetname = queries Cell A1 = "ABC"
The Macro queries the "test Data" workbook (c:myfolder estdata.xls) "sheet x" and looks in column A for ABC, if it finds ABC it will copy the row and paste it into Myworkbook, sheetname = queries. There are often several rows of data that need to be copied that all have "ABC" in column A.
Also, in column B of the test data workbook, is a number, the highest value denotes the "version" of the data, the highest number is always the latest version of data that should be retrieved, e.g. if 9 the highest value in column B then all data that has ABC in column A and has 9 in column B should be retrieved, all other records should be ignored.
I guess this is a sort of a macro loop but not too sure how to do it.
I have this worksheet (see attached file). what i want to ask is how to fill the HS CODE on Sheet 1 based on database ? can i use vlookup?? or there is another formula ?
I have a problem in my list cheking. I have two sheets in my attached excel file. I have mordified for my own job security purpose. I need to check the individual cells of "parent" column in "Missing Asset" with "parent" column of "Asset" worksheet. It means, presence of cell text of A2 of "Missing Asst" sheet has to be checked with "A" Column of "Asset" sheet. If A2 text is present in "A" Column of "asset" sheet then "Y" should appear in B2 cell of "Missing Asset" sheet. Else "N". Its just Column text checking wothin two work sheet & then identify the cell which is not match. I guess "VLOOK" can work. Is it not?
I have a "cat_no" file and a "master inventory" file.
I need to do a vlookup to match the catalog #'s and mfr name in the cat_no file and the master inventory file. I also need to pull the pricing and packing string from the master inventory file and add it to the cat_no file where item numbers match.
see teh attached file, you can see on the file. Worksheet B of B62, I typed 15254", it col name "yarn count" and the product code you can see is Q921 at cell A62. Worksheet A, you can see F2 is Q921, col name is "product code". Now I just plugin a vlaue B62 ='15254' and I want it shows on worksheet A - G2 but remember it must match the product code of worksheetB - cellA62 'Q921' and worksheet A cell F2 'Q92' because next time user will plugin a number ie.1111 on B164; where product code of worksheet B - cell A164 must be match to worksheet A - cell F3, but it should show the value 1111 on cell G3.
1. No. Description Code Req Unit Amount 1 Description 591032 1 pc ? 2 Despription 614804 25 pcs ? etc.
2. No. Code Description Unit Qty Items Amount 1 591032 Description pc 1 84.30 84.30 2 614804 Description pcs 25 0.89 25.25 etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
I have used the merge facility to incoporate all the worksheets into one excel files. As they all have same heading, I have sorted the data, first by their account expiry time (oldest to newest) and then by manager (A-Z)
For example, system report generated on 15/03/2013, 28/03/2013, 03/04/2013, 15/05/2013, 28/05/2013 and so on and these are sheet names too. What I want is one worksheet called report with the same heading as my merged worksheets and return values where Column C in 28/03/2013 is compared to 15/03/2013 and if the employee ID matches than return the whole row of data for the report.
the next query would then be for finding employee ID in 03/04/2013 and comparing it with 28/03/2013 worksheet and returning the matched ID in report worksheet.
This is the layout of the report worksheet.
Display NameEmployee IDAccount StatusE-mailDepartmentManagerComment 15/03/2013 to 28/03/2013 28/03/2013 to 03/04/2013 03/04/2013 to 15/05/2013 15/05/2013 to 28/05/2013
so for the above report worksheet, if employee id matches the two compared worksheet (15/03/2013 to 28/03/2013) return all value (Display name, employee id, account status, email, department, manager, comment) from the 28/03/2013 and so on.
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet. The final sheet is what the end product looks like.
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches() Dim Sht1Rng As Range Dim Sht2Rng As Range Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp)) Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp)) For Each c In Sht1Rng Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues) If Not d Is Nothing Then Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value Set d = Nothing End If Next c
I am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
I'm building a spreadsheet for a sporting franchise using a pull-down validation menu. Once the opposing team name is selected from the drop down menu, I would like it to display the opposing teams players and their statistics.
On the database worksheet, I have a web query pulling names and statistics from the web. Each player name has his team name in his corresponding row. What function can I use that will search for that team name and report it back to the display sheet? Once I have the player name there, I think I can figure the statistic portion... But I can't seem to figure out how to pull all of the players with the matching team name into my display sheet.
Example:
A1 on worksheet "A" contains a pull down menu with team names "Lightning", "Storm", "Magic", and "Thunder".
A16-A20 on worksheet "B" contains players from team "Lightning" A21-A25 on worksheet "B" contains players from team "Storm" A26-A30 on worksheet "B" contains players from team "Magic" A31-A35 on worksheet "B" contains players from team "Thunder"
B16-B20 on worksheet "B" contains team name "Lightning" B21-B25 on worksheet "B" contains team name "Storm" B26-B30 on worksheet "B" contains team name "Magic" B31-B35 on worksheet "B" contains team name "Thunder"
If I pull down "Lightning" on A1 (worksheet "A"), I want the following to display:..........................
hello. i'm new to excel and i'm really hoping for some serious help here. i have the basics down however i'm really stumped at this point. Let me try to explain my worksheet. the worksheet has a sheet for data which is used for drop list values in the new patient template sheet. the new patient template which is just that a blank entry sheet that the user duplicates and adds a new patient to the worksheet to track the visits made by medical staff. there could be over a hundred new patient sheets (each named by the patient) at any given time.
here is what i need help with: my sheet is setup on a monthly basis so each patient has a total of 4 - 5 weeks listed with entries for everytime a nurse visits that patient. what i need to know is how to search the cell entries for the first time a visit occurred and the date it occurred and this needs to be broken down by the 1st of the month - the 15th and then again for the 16th - the end of month for every patient sheet in the workbook. the ranges are not together that i need to search for example f14:f20, i14:i20, f35:f41 and so on for the first 15 days of the month. this all needs to happen like in a macro or somehow automatically.
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1 data data data data p2 data data data data
[Code] .....
needs to become:
p1 data data data data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1: 50025 50026 50086
Table 2: Considering that name, age and location is each in separate cell