Copy To Next Available/Blank Row
Aug 28, 2006
I have an Excel workbook which uses the following code to copy the filtered row into a new sheet. as you can see the following code, clears the worksheet, how can I change the following code so if the first row is not empty in the sheet2, it copies the text to the second row and so on.
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(0, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible) ...............
View 9 Replies
ADVERTISEMENT
Feb 4, 2009
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies
View Related
Mar 2, 2013
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....
View 2 Replies
View Related
Jan 15, 2007
Below is the text that I use to copy AL if AJ is not blank:
If Range("AJ2").Value <> "" Then
Range("AL2").Select
Selection.Copy
Range("AL2:AL65000").Select
ActiveSheet.Paste
What I want it to do is copy the formula out of AL2 down to as many cells necessary to populate column AL as long as AJ is not blank. If AJ is not blank I want it copy AL2 down as much as needed to fill column AL. I currently have it running to AL65000 but don't want to leave the formula in that many cells. If there is nothing in AJ I don't want anything to be in column AL.
End If
End Sub
View 11 Replies
View Related
Jun 22, 2009
I have a macro that will take 4 cells of data from a source and put in the next blank row starting with C9:F9 of Worksheet “NORTH”, then the next blank row and so on. I also have another macro that does the same function but puts data in Worksheet “SOUTH”.
In the event of an error where I select the wrong macro putting data in the wrong Worksheet, I would like to have a macro that would swap the data into the correct Worksheet and then clears it from the wrong Worksheet.
Example: Macro1 has written 4 cells of data to next blank row in C:F in Worksheet “NORTH”(Say C10:F10) which was wrong choice. I need a macro that captures the last row that has data in it (non-blank) which is C10:F10 of Worksheet “NORTH” and then copies that data to the next blank row of Worksheet “SOUTH” C:F, (say C15:F15) THEN clears the data from Worksheet “NORTH” that it just copied from the last non-blank row which was C10:F10. Essentially swapped and reset.
View 3 Replies
View Related
Feb 21, 2014
I am looking to write a code that will look at a range (which can vary from A16:F2000) and
1)will find all blank rows,
2)increase the size of the row height in the blank rows to 30,
3)change the fill of the row to a color
4)copy the cell value from column F of the row below the blank into column C of the blank row.
5)Increase the font to 20pt, bold and center the word in the cell
so for all the blank rows take the value of the cell in the row below, column F and move it into the row above, column C. And format the row.
View 5 Replies
View Related
Jan 20, 2009
I have columns of data and one column may have the letter Y or N or be blank in relevant cells.
The Macro filters on the Y in the column and then goes to another column and copies all names in that column. That works OK if there is any Y's but if there are no Y, the filter part still filters and then goes to the names column which will ultimately be blank and copies every cell down to the end cell.
What I want it to do is filter on Y and if there are no names (i.e no data at all)in the names column (J2) it bypasses the copy and paste bit and proceeds to closing the worksheet and goes to the next stage of the macro
There is a header row.
Selection.AutoFilter field:=4, Criteria1:="Y"
Range("J2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Windows("Blah Blah.xls").Activate
Sheets("Sheet1").Select
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Windows("Blah2.XLS").Activate
Application.CutCopyMode = False
Workbooks("Blah Blah.xls").Close SaveChanges:=False
View 9 Replies
View Related
Jul 27, 2009
i have a small macro that is deign to move info from sheet1 to sheet2,
column B in sheet one has a list of names, not every cell has a name in it, if cell B8 has a name then that cell and cellC8 is copyied to sheet2 column B&C.
The macro i have copies over the blanks as well and i end up with sheet2 column B cell 8 filled cell 12 filled in etc.
How do i stop the blanks?
Private Sub CommandButton2_Click()
'Transfer Results
ActiveSheet.Range("B14:C400").copy
Worksheets("points").Select
Sheets("Points").Range("B" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End Sub
View 9 Replies
View Related
Apr 21, 2007
I´ve tried to search in many topics but I couldn´t find the specifc answer and, how I´m just begining with VBA/Excel,
I have a worsheet with many data, and I want to copy it to another worksheet. As I don´t how many cells with information I have, I just want to copy all non-blank cells and paste to other worksheet - paste on the next blank cell.
View 9 Replies
View Related
Jul 6, 2007
I want to be able to Autofilter a specific criteria and copy over to another sheet without the header, then in the first column it'll change the information to a date, then copy back over to a third sheet. I have accomplished all of that.
My problem lies with that if there is no contents when the Autofilter is applied, it will still continue to do the steps and then I have Run-time error '1004' AutoFill method of Range class failed. Because there is no contents it tries to do this.
View 9 Replies
View Related
Sep 4, 2007
I have a worksheet with macros which generates data after a number of blank rows (the number of blank rows is never the same). I want to copy the data rows to another worksheet without the beginning rows being blank. I am not sure of the best way to do this and if it can be done with a macro in the new worksheet. At the moment I do a manual copy and paste.
View 9 Replies
View Related
May 30, 2013
In a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies
View Related
Jan 21, 2014
way to copy and paste a formula into every other blank row?
The formula will be staying in the same columns the whole way down the sheet. Eg: A1, A2, A3 ..... ETC
View 1 Replies
View Related
Apr 18, 2014
I need to change below formula
I want to copy formula form G7 to last blank cell of column G while below code copy formula g7:g100
[Code] ....
View 4 Replies
View Related
Apr 2, 2009
I have a commandbutton and I am trying to workout the code to go into its onclick event.
I have an input worksheet (inputsheet) where i enter information into cells A1:A5
I would like to click the button and have this info then transferred into the record sheet (called: recordsheet) in columns A to E.
Each time I press the button I would like the info in inputsheet A1:A5 to be transferred to a new row in recordsheet.
View 5 Replies
View Related
Oct 17, 2009
Is there a VBA macro that can be written that will look in a range of cells in a coloum, look to see if its blank and then copy the value from the cell right above it into it?
View 8 Replies
View Related
Jan 5, 2009
I am looking for a macro that will open a file called File1.xls highlight only the cells in columns A:B that have content, then toggle back to another file called File2.xls, scan columns A:B, find the next blank cells within A:B and paste.
Here is a sample of what i am looking for:
Macro to scan File1.xls and find & copy only cells in columns A:B that are not blank.
File1.xls
_|__A_ |__B_|
1|_text|_text| (Copy)
2|_text|_text| (Copy)
3|_text|_text| (Copy)
4|_text|_text| (Copy)
5|blank|blank| (DO NOT Copy)
Toggle to File2.xls, scan columns A:B, paste content copied cells from File1.xls in next blank cells in columns A:B of File2.xls.
File2.xls
_|__A_ |__B_|
1|_text|_text| (Pre-existing text)
2|_text|_text| (Pre-existing text)
3|blank|blank| (Paste Row1 from File1.xls)
4|blank|blank| (Paste Row2 from File1.xls)
5|blank|blank| (Paste Row3 from File1.xls)
6|blank|blank| (Paste Row4 from File1.xls)
View 9 Replies
View Related
May 30, 2012
I have a Worksheet that is manually populated with file names into the 2nd cell of each column for columns A through D.
I need a macro that will loop through each column, starting at B2, c2 etc, and copy each value, and then paste it into the first available blank cell in column E
Before
YesterdayToday10108595101085661010859510110182
After
ALL10108595101085661010859510110182
Ive tried a few combinations of code, but nothing seems to be working.
View 2 Replies
View Related
Aug 16, 2013
I have data in column A separated by blank rows. I want to copy ranges between two blank rows, and paste it to sheet named "mega" so that each range is in its own column.This is code I'm working now.
Code:
Sub QuickSet2()
Dim rng1 As Range
On Error Resume Next
Set rng1 = Cells.SpecialCells(xlCellTypeConstants).EntireRow
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1.Copy
Sheets("mega").Range("A1").End(xlRight).Offset(0, 1).Paste
Else
MsgBox "No constants found"
End If
End Sub
View 6 Replies
View Related
Dec 1, 2006
It's finals week and I need to figure out this last VBA problem for my excel class. (Yes, we are allowed any outside help.)
The code below is something I tried to develope to do the following:
1. Search "N" column for blank cell
2. If cell not blank then select
3. Copy select cell information 3 cells to the left
4. Continue function to next row
I cannot figure out two things with this code. I need the code to copy/paste the information in the cell versus equalling values. Sometimes there is a small .jpg or .gif file inserted into the cell, so copy/paste is desired. Second is I need the function to not copy formulas if possible. I cannot figure either of things commands out. Hoping message boards can help me as they always have in the past.
Code: .....
View 9 Replies
View Related
May 8, 2008
I have 21 (20 data sheets + 1 result sheet) excel worksheets. A5:E5 is the starting row of values. I want to copy down all the possible rows with values until the row is blank (.xlDown) and paste in Sheet21, A2 onwards.
The problem is each of these 20 sheets have different number of rows of values (say 1 has 10 rows, 2 has 23 rows etc.,). I want to copy A5:E15 in Sheet1 and paste in A2:E11 in Sheet21 and copy A5:E28 in Sheet2 and paste in A12:E35 in Sheet21 and so on.
Sheets("Sheet1","Sheet2" .......)
Range("A5:E5").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("Sheet21").Select
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
View 9 Replies
View Related
May 20, 2009
I have been tinkering with a code for a few days now and managed to finally get it working . The Code basically copies data from one spreadsheet (Macro Tester6), opens up another spreadsheet (Macro Tester Master), pastes the data, Saves the file (Macro Tester Master) and then closes it.
The Macro Tester6 file is then left open as I prefer.
The problem I have is that the data always paste into the same row, hence overwrites data already inserted.
the code finds the next blank row to paste the data in.
My code is:
Private Sub CommandButton1_Click()
' select current workbook and paste the values starting at A1
Windows("Macro Tester6.xls").Activate
Sheets("Sheet1").Select
Sheets("Sheet1").Range("A1:I1").Select
Selection.COPY
' open the source workbook and select the source sheet
View 9 Replies
View Related
Dec 19, 2006
I am trying to copy the contents of all non-blank cells starting at A9 to R1 of another sheet " Record Form Games 3583). If A9 is empty it will skip a row and repeat until row 43. Each of the cells A9:A43 must also be able to act as a reference point for Offsetting and selecting a series of ranges in the same row.
View 9 Replies
View Related
Mar 6, 2008
The attached picture shows the problem. I want to automatically fill the blank cells in column A with the value immediatey above them. I want to do the same for column B and C. I have never worked with VB except to copy key strokes.
View 3 Replies
View Related
May 13, 2008
I want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
View 6 Replies
View Related
Jun 11, 2014
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
View 1 Replies
View Related
Apr 22, 2014
I am looking for a macro that will copy the row above it, to include formatting and formulas, however not the actual contents. I need the row that's being copied to be hidden from view, which is where the problem stems from. The macro is also copying the 'Hide' formatting and I want to exclude that. This is the current macro I am using:
[Code] .....
View 2 Replies
View Related
Mar 4, 2008
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
View 9 Replies
View Related
Jun 23, 2009
If cells in column J are not blank, values in column K must be copied from column I.
If not, i.e. cells in column J are blank, values in column K must be copied from column I + the fixed value in cell $C$2.
Can't get "if" nor "notblank" formula working.
View 6 Replies
View Related
Apr 21, 2013
In table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A
Hiddenrow with formula
B
C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.
View 6 Replies
View Related
