I have the VB code below which works perfectly to change the value in B3 based on new input in A3.... but now I want to have this same code/formula apply to all rows from 3 to 1000. (ie: input in A4 changes B4, etc.)
View 5 RepliesI need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
I have a cell with seven conditional formatting formula rules that I now want to copy to the rest of the column. I can copy/paste special/formats one cell at a time but if I try to to this with a group of cells, (or try using the format painter), it treats the formula references as absolute, even though they aren't shown as absolute in the rules manager. Am I missing something? Using 2007.
View 4 Replies View RelatedI have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
I have a macro that inserts a formula on the first row and then copies it down. The problem is the row count is variable but I know it won't exceed 5000 so I just copy it down 5000. For the blank rows I get the ugly #NAME, #VALUE, etc errors.
I know there are ways to supress those error messages, but how about a way so that the macro checks to see how many rows are populated so it doesn't copy down on the blank rows.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I am trying to copy formulas and no matter what I do the cell only displays the result from the cell I am copying. I have tried to copy in different ways, autofill, copy and paste, paste special, and then tried rebooting, everything I know of.
View 9 Replies View RelatedI currently have a macro that outputs data to a bulletin-board type table in my worksheet. At the moment, what happens is that the macro copies the entire table down one row using copy/paste, then prints a new line of data to the top row of the table.
This works great because it is very fast and because I only have to format each line once--the formats just get copied down every time a new line of data is added.
My problem is that while this program is running, I am unable to use copy and paste in windows, because the copy/pasting from the macro overwrites the windows clipboard.
Is there a way for me to "copy" formats from 1 range to another range of equal size without actually using copy/paste? I know this can be done with values (eg. range("B2:B4").value = range("A2:A4").value), but I can't get it to work with any sort of formatting.
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedSheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View Relatedlook for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I have a list of invoice #'s on a sheet named "Temp Sheet".
I have a VBA macro that created a new tab for each entry and named it the invoice #. So basically the vba code created a new tab ( based on the number of invoice #'s on my list ), and named each tab an invoice number. So if I had a list of 10 invoice #'s, named S1-S10, the vba code created 10 tabs, named S-1, S-2,. S-3.....
Now to my question.
I have a template sheet I want to copy from ( "Template" ), and select any sheet that starts with "S", and copy/paste this template to.
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I am doing the aged old problem of copying data from one sheet to the next vailable empty column on another sheet, this is done and is working fine. I need to adjust a single line of code so that it copies the value of the cell rather than the formula (so the same as paste special, value).
The whole code is:
Is there a way of having a value that's in cell A1 also appear in cell C1 when the value in A1 changes - but without copy & paste?
View 9 Replies View RelatedI need to create a macro that opens 'Core-Billing.xls', copies the LAST cell in a specified column, and pastes it into 'Shrinkage Report 2009.xls' in [h]:mm format.
For this example, we will use column E in 'Core-Billing.xls' and cell I8 in ' Shrinkage Report 2009.xls'. Associated files are attached. I got a book yesterday ... but sometimes just going outside of your comfort zone is all it takes!
I am trying to make this copy down from the Active Cell.
It should only copy down as far as the last cell in the row next to it (Left)
Example - Active Cell C3, ROW next to it filled B6.
It should take the value in C3 and copy that value to C6.
Sub CopyDown()
Dim wks As Worksheet
Dim rng As Range
Dim LastRow As Long
Dim col As Long
Set wks = ActiveSheet
With wks
col = ActiveCell.Column
Set rng = .UsedRange
LastRow = .Cells.SpecialCells(xlCellTypeLastCell).Row
Set rng = Nothing
On Error Resume Next
Set rng = .Range(.Cells(2, col), .Cells(LastRow, col))_
.Cells.SpecialCells(xlCellTypeBlanks)
rng.FormulaR1C1 = "=R[-1]C"
With .Cells(1, col).EntireColumn
.Value = .Value
End With
End With
I have a % of Sales column (column AO).
This is sorted from A-Z
What I need is select, then copy column AO except I need to copy the sum of 50%. Then I need to copy the next 30% and then the final 20%. All 3 selections/copy will be pasted into another workbook
coding to copy data,"Values Only" from say sheet2 Range I3:P12, bearing in mind that some of the rows in that range will be empty on occasions. Then
Paste to Sheet3 "A" under the last used row.
I'm using Windows Vista and Excel2003
How can I copy a tab and then change the link on it to point to a another new tab in stend of the orginal tab.
View 9 Replies View RelatedI need a macro that will copy the first row of a worksheet, insert rows below and insert the data.
Sheet1 *ABCDEFGHI1*1234567*2*1201212****3200010010099.7699.76***20004*1201212121215*5202599.7610099.7699.7699.7699.76202520256*120121212***7202599.7610099.7699.7699.76**2025 Excel tables to the web >> Excel Jeanie HTML 4
To This:
Sheet1 *ABCDEFGHI11*1234567*12*1201212****13200010010099.7699.76***200014*1234****15*1201212121215*16202599.7610099.7699.7699.7699.762025202517*1234567*18*120121212***19202599.7610099.7699.7699.76**202520*12345*** Excel tables to the web >> Excel Jeanie HTML 4
I just don't know how to write this!!
I need to add code to do the following:
If there is a number (all should be text) in column C then take that number up one row and over to column T and put the number there.
There really should not be any data past 200 rows so you could actually stop there instead of column C to the bottom of the page.
I have a workbook where I create new sheets with vba code.
Every new sheet is an empty copy of the previous one.
I a specific cell, lets say C50 a som will be calculated based on other values user has to fill in.
I want those SOM values from every sheet copied to a base sheet (hidden).
I need the values in one column, so some code must 'see' the next empty row in this column and put the value there.