Count Lines On Display Once Field Is Filtered?
Jun 24, 2014
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
View 2 Replies
ADVERTISEMENT
Jun 7, 2007
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
View 9 Replies
View Related
Aug 26, 2009
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
View 6 Replies
View Related
Mar 14, 2013
I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
This also includes the WHITE sheet.
View 3 Replies
View Related
Mar 26, 2013
I have a table which is refreshed from a view on our SQL server. I use a part of this data further on and would like to automate the following: I would like to have a range set which I can use to loop through data. The range should hold the filtered data of table "PremiumTable", the columns "Grouping2", "Price", "Grower"
I have found a couple of posts giving the ability to create a range of visible cells and specific columns, but I wasn't able to combine this yet.
View 2 Replies
View Related
Oct 31, 2013
I've got a macro that adds new data to a sheet and updates an existing pivot table.
It's been working fine but ever since I've had to have two items in a field hidden it won't show any new data in the pivot table.
For example, the field firm name has two items hidden after the update any new firm names that weren't in the report before won't show up in the pivot table. The pivot table recognizes that it's part of the full data set but the checkboxes are all unchecked for the new firm names.
this is the code i"m using to update the pivot table:
'Update Pivottable
DSRWKB.Activate
DSRWKB.Sheets("Pivot").Activate
[Code].....
View 1 Replies
View Related
Jan 20, 2008
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
View 9 Replies
View Related
Jan 28, 2013
I have Sheet1 and Sheet2. On Sheet2 I have some filtered items.
Now, is it possible to link the filtered items to Sheet1, e.g. =IF(Sheet2!B1=IsVisible;Sheet2!B1;"")
I do not want to make a copy/paste/vba turnaround.
View 2 Replies
View Related
Sep 21, 2007
I have a workbook that lists various shipment numbers and their contents to several locations. What I am trying to do is, on a different worksheet in the same workbook, list all shipments to one location; having different worksheets for each specific location.
I am sure there must be an extremely simple solution to this, however I am unable to locate it.
Also I would like the separate location worksheets to autoupdate when new shipments are entered on the main worksheet.
View 6 Replies
View Related
Jan 10, 2007
I have a cell containing a address. I have used alt-enter to separate lines of the address. I have a userform that contains a textbox which which loads the cell containing the address. The problem is once the useform is loaded the address in the textbox is all on the same line and contains a funny looking back the front P character where I have used alt-enter in the cell to make a new line. This ones got me knackered.
View 2 Replies
View Related
Sep 12, 2007
How can I break this onto 3 lines in Visual Basic Editior to make it more readable:
MsgBox "Only enter data in white cells." & vbNewLine & "Yellow cells contain formulas or dates entered automatically", &
vbNewLine & "Do not insert blank rows. Copy row(s) and Insert/Paste" , vbInformation, "Spreadsheet by GJF"
View 4 Replies
View Related
Mar 4, 2012
I have a calculated field - if it is 0 I would like to now show the 0 - just a blank cell - can I do that?
View 1 Replies
View Related
Jul 17, 2013
I am trying to display number of lines which depends on value pass by user. Actually user is passing some value. On which some group of lines has to be display.
E.g.
for 1 value 9 lines
for 2 value first 9 lines + another 9 lines
for 3 value first 18lines = 9 lines
and so on till 52.
View 2 Replies
View Related
Jun 23, 2014
formula to tell me 9 values. These values are on 9 separate tabs/worksheets. They are always at the bottom row in a specific column - but the row changes every week. I have a totals tab in this workbook. I would like to stop manually going to each tab and pressing Control+End to see the total and manually going back to the totals tab to enter the value. Is there a formula to find these 9 values automatically and display them on my totals tab?
View 6 Replies
View Related
Sep 24, 2009
I have this list wherein the rows might extend beyound 100.
At AG23&24 i have some comments
Can i somehow implement such that even when i scroll down teh rows this too will be appearing, as we see sometimes navigation toolbars appearing in websites when we go down or move up.
I want to know if this feature can be implemented in excel.
View 11 Replies
View Related
May 3, 2012
I am trying to display text in the value field within a pivot table. I do not want a count or any number to display. What I am basically trying to create is a weekly schedule for nurses, with the dates on the top and times along the side, with "call type" and client as the text data to display with the value field.
I have attached an excel file with all the data on Sheet 1 and my attempt at a pivot table on Sheet 2. Perhaps there is some way to write a macro to display the data in a similar fashion, without using a pivot table?
Clients and Caregivers - All Schedules-2.xls
View 12 Replies
View Related
Apr 11, 2014
I count D5:D54 filter data but i want count only when value is greater then 0(zero)
[Code]....
I Mean:
d5 = 0 don't count
d6 = 0 don't count
d7 = 0 don't count
if d5:d54 has value greater then 0 then count...
View 6 Replies
View Related
Jan 26, 2012
I have a table of data which I am analysing in a Pivot Table. For the majority of the data, the Pivot works very well: however I have a small issue, but it subsequently means the Pivot is useless.
Within the table array that I am referring to, there is a column of data of "Days per employee for a given period". The rows of data within the table array relate to every absence entry per employee, but this final column of data always contains the same figure (although can differ from employee to employee).
When I put the data into the Pivot, I can summarise the absence(s) as a simple sum. However, this final column of data should not be summed, since it is already the sum figure.
This figure though needs to be part of the Pivot, since I need to report on the percentage of absence days per type over the given period. So, the simple representation of =absence day(s)/worked days does not work... well I cannot get it to work. Additionally I have tried features like % of, but nothing.
I am using excel 2007.
View 5 Replies
View Related
Nov 16, 2005
I'm making a Pivot table and i'd like that the different field will be displayed on each line.
here is an exampe of what i have and what i want to have
______Group____Average age
Man_____1_________16
_________2_________22
_________3_________25
_________4_________33
_________5_________48
Woman__1_________16
_________2_________22
_________3_________25
_________4_________33
_________5_________48
Result needed
______Group____Average age
Man_____1_________16
Man_____2_________22
Man_____3_________25
Man_____4_________33
Man_____5_________48
Woman__1_________16
Woman__2_________22
Woman__3_________25
Woman__4_________33
Woman__5_________48
Where can i found the option to edit? if it's possible.
View 9 Replies
View Related
Nov 10, 2008
Countif can be used to count the no. of occurrence of a certain value within a range. However, if the range is being filtered, can the no. of occurrence be counted?
View 3 Replies
View Related
Mar 20, 2006
Is there a function to count blanks in a filtered column? That is, if I filter a column to show the rows that are blank, can I use the subtotal function (or some other) to count the number of blanks?
View 14 Replies
View Related
Oct 12, 2011
To count the genuine number of rows in a worksheet, I use...
count = Cells.Find(What:="*", SearchDirection:=xlPrevious,SearchOrder:=xlByRows).Row
When I add an auto-filter, the above still works fine.
When the auto-filter doesn't reduce the no. rows, the above returns a value of 1.
I've tried using...
count = Rows.SpecialCells(xlCellTypeVisible).Count
... with a result of 1 if no rows are filtered
So, what is the best way to count the populated number of rows on a worksheet where there is an auto-filter that may, or may not, reduce the number of rows ?
View 2 Replies
View Related
Aug 16, 2012
How do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
View 6 Replies
View Related
Jul 30, 2007
In an excel sheet A1 to ...... colum i have some cirteria. If I filter a criteria i should get the count for it. Kinldy let me know with out using VB how is it possible.
View 9 Replies
View Related
Jun 28, 2006
How do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
View 6 Replies
View Related
Nov 20, 2006
Is it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
[Code]...
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory???
ERROR#9 OUT:
View 9 Replies
View Related
Dec 13, 2013
apply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 Replies
View Related
Jul 16, 2014
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
View 2 Replies
View Related
Jan 21, 2009
Is it possible to count the unique entries in a range based on the results of a filter that has been applied? I basically have a column with 2000+ cells that contain some matching values and I only want to count the unique entries. This will need to be a dynamic count as well as the filter criteria can and will change all the time.
View 14 Replies
View Related
Dec 13, 2009
As the subjects states I need to count the unique entries in a filtered range.
View 7 Replies
View Related
