I am trying to setup a formula that does the following:
Sheet 1 contains the formula. It performs a COUNT on a column on Sheet 2 and dislpays the result on sheet 1. I need to tell Excel to omit from the COUNT list, all entries containing the word "Free".
Inm other words, i need a count performed on column A of sheet 2 but the result must ignore all entries within that column A that contain the word Free in it.
Excel 2007 I have a spreadsheet of file boxes the keeps a log of boxes, contents, locations and shred dates. Currently figuring out when and which boxes can be shredded is a manual hunt, find, and then deal with it. I can use CF and Sorting but I have been looking at some search type functions to return a list meeting the requirements and trying to step my way towards that.
1st attempt. Was find out how many boxes meet the shred (before today) that have not already been detroyed. Column K is the Shred Date, D1 is Todays date, Column G is Status. Got this working good.
My failed attempt came at trying to find the earliest shred date excluding those that have been destroyed. This is not really neeed but I was hoping it would get me closer to creating the list of boxes that meet shred that have not already been destroyed.
Note: Column A is the Box No. and the spreadsheet contains blanks as we continue to add file boxes to storage.
Below array formula find the highest box number used by each department.
I would like to create a list of boxes including Column A "Box no.", Column H "Location", Column K "Shred Date" for any box whose shred date is before today that has not aleady been labeled "Destroyed" in Column G.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I would like a formula in cell B13 which would look at the range B2:B10 and count how many are in between 07:45-08:00. In cell B14 I would like it to look at the same range and say who is on shift between 08:00 and 09:00, and so on. The reults should be the same as I have typed in cells B3-B29. Is this poosible and/or is there an easier way if there is?
I have one long column filled with the names of people. I need to count the number of people that show up once and the people that show up more than once. So I am looking for any name that shows up more than once or just once and not the specific name of the person. I can use two different formulas for each result I am looking for.
For instance(column): Patel Patel Patel Smith Myers Kaplan Jones Jones
I need to come up with an answer that shows that 2 people have their names show up more than once and that 3 peoples names show up once.
Right now I have a column of about 300 rows where I want to count how many actual names are in the column. I thought that COUNTA(c2:c313) would work, but it returned 312, while Im expecting it to return about 10.
I think that the reason is because all of the cells in this column are pulling data from another sheet using this formula: =IF(Clients!I299="","",Clients!I299). Most of the data are blank cells
Since of the rows in this column are empty, so I was wondering if I perhaps there was a function such as "DONTCOUNTIF" which would count the cells which didn't have a certain value, in this case "".
I have a range of cells that may contain several different abbreviations (text groups). I have used the COUNTIF function with * place in front of text to count cells that contain the listed text eg =(COUNTIF(G6:G39,"*HWD")) which has worked well and returns an accurate count of the cells that contain HWD. I have tried to do the same thing for a COUNT function that contains an IF function and no count is returned. When I remove the * from the formula a count is returned for cells that contain only the HWD text and not cells that contain HWD and other text. {=COUNT(IF(P9:P69="MCAW",IF(G9:G69="HWD",J9:J69)))}.
I am creating a spreadsheet to keep track of money and grouping them into categories. I have a column to group a purchase into a category (column E) and the amount spent in column F. I want column T to add up all of the purchase that were made according to the category in Column E.
What i am trying to do is count the number of rows that contain data.
It will always start in A7 and when creating the macro i hit control-shift-down arrow.
There will be a differnt number of rows for each data set. When i ran the macro it kept the result of the first data set that i used to create the macro.
I have a 2500+ line document with different years indicated in column D. How would I use the count (??) function to count the number of occurances for 1998, 1999, 2000, etc?
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
*ABC53TypeCost$Bought54Orange3Friday55Orange5Sunday56Apple4Friday57Orange5Friday58Orange4Sunday59Apple4Friday60Banana3Tuesday61Orange4Sunday Excel tables to the web >> Excel Jeanie HTML 4
Now, i want the Sum and Count of Orange which is bought on Friday
I have roughly 150 cells I am trying to count, some blank, some not blank, some with numbers. All are in the same column. I want use a simple function that sums the total number for me, say from (A2:A153). Answers?
If cell D3 has the text string "RQS" and cell D2 is colored green, I want to count as one. The formula needs to apply to a range of cells. The end result being I want to know how many green cells are delineated at RQS.
I am attempting to create a vlookup formula that will count or sum a series of data so that I can pull it over into a summary sheet on a report. The vlookup formula that I am using is
I am trying to use a count if function for a specific word and a time range or number. so On Sheet 1 (called Raw Data) I want to check for the word annuity in Column H -
If it is present I want the formula to then check if the corresponding time in column C is within a specific hour.
I have a workbook with 2 worksheets: summary and data. I added the following function to a module.
[Code].....
Then in summary sheeet in cell A1, I added the following formula:
=DashboardRowCount()
Data worksheet has only 11 rows but this function returns 1048576 rows! My intention is to get a row count of non-empty cells in column A of Data worksheet.
My Macro opens an excel file and I've to count the number of blank spaces for every filled column. I'm using CountBlank function for that.
But, the code fails at the countBlank line by saying Type Mismatch.
Code:
Sub Snippet_Code() Dim apdata as excel.application, wbdata as workbook
set apdata = new excel.application Set wbData = apData.Workbooks.Open(Filename:="ABCD.xlsx")
For colnum = 1 to 50 'Columns from 1 to 50
[Code] .......
My code fails at the BlnkCnt part. I also tried assigning the two cell addresses in two variables and passing the variables to the range method. But there again, I get the error of Method Range of class _Global Failed.
Similar to SUMPRODUCT, do we have any function to count cells with diffrent critereas. Countifs does not work since the critereas are at different coulmn and rows.
I have created a pivot table and want to get a count of values in a specific column. I have a list values in column X of my Data, then in column Y their is Y/N answers.
Colour
In Stock
Red Y
Blue Y
[code].....
I would like to count these items so they are constantly updated in my pivot.
In an excel sheet A1 to ...... colum i have some cirteria. If I filter a criteria i should get the count for it. Kinldy let me know with out using VB how is it possible.
I have an access database: 2007.mdb I have an access table: All Data - Pre07
I have an excel worksheet which connects to 2007.mdb and selects data from table All Data - Pre07 using a 'user defined' filter via an input box. This filter sets the group which is one of the fields on the All Data - Pre07 table.
The code which performs the above function is shown below.
I wondered whether it was possible to perform a Count function in vba (rather than a Select Function) which will just count the data in access and then return the count rather than importing all the data.
For example, I would like to count the number of rows in the Access table - All Data - Pre07 which have a group = 'AA' and then return the count to WorkSheet 'AA'.
Is it also possible to perform multiple count functions in one connection or do I need to reconnect (i.e. write the code again).
Application.ScreenUpdating = False Dim mygroup As String Dim datinput As String mygroup = InputBox("Enter Group", "Please Enter", "AA") datinput = "'" & mygroup & "'"
I have a problem with counting the number of students assigned to each professor and determining the number of students who have passing grade. Let say that the passing grade is 80.