I have 2 sheets in my workbook. On the first sheet (KPI) I have a cell with a date in, this is always the first date of a month. On the second sheet (MCR) I have all my data.
I am trying to write a formula (which is loacted on the front sheet [KPI]) to count the number of cells that contain a date that falls on or after the date on the front page, as such I have the following:
=COUNTIF(MCR!S2:S200,>= F8)
Where F8 is the cell with the date i.e 01/05/2008
When i run this I get an error, it appears that the formula is trying to look for cells that contain the date "F8" instead of the date,
I have a spreadsheet which I use to track when a work request is recieved, when we confirm the request and when we action the request. I have been trying to write some code to count the amount of requests, receipts and actions we have processed in the last month.
My first column shows who the request is from The second shows date recieved The third shows date we send receipt The fourth shows the date actioned.
I would require a formula to count the amount of workdays between cell a1 and cell a2. Assume formula is in celll a3 and both a1 and a2 are date formated.
how to make a formula using a column label to count all cells that fall in a given date range. Example, in the attached sheet I would like to make a formula using the column heading "Dismantled" to count all cells that contain dates ranging from 10/13/08 through 10/19/08 inclusively.
I want to work out how many cells in a colums are "equal to or more than AND less than or equal to" certain date ranges.
E.G. Column A has random dates from 01/10/2012 to 31/12/2012. I want to know how many of these cells have dates that meet the criteria of >=01/12/2012 and <=31/12/2012.
I have searched on here and found COUNTIF which didn't work. I also tried DCOUNT which I couldn't get to work.
I want to use a sheet for planning work tasks. I need to count how many cells containing 'x' text exist in rows starting with dates greater than or less than 'Today'
If you look at my workbook (attached) I have dates and tasks on 'sheet1' I have stats on 'sheet2' In the 'spent' on sheet2 I have a COUNTIFS to count the cells containing 'Fish' but I also want to narrow it down further so that I see the nuber of cells containing 'fish' where the date in the A column for that row is less than 'Today'
Hello, we have a stop light spreadsheet for status with several different projects. In each row there are conditional format status green - good, yellow - needs work, red - bad...based on data from another tab.
There is an "overall status" column that pulls the worst color that exists for a given row.
There is also a date for each row. Now we want to pull the worst color in the "overall status" column for a date range...and display that on a separate summary tab.
For 4/1/09 thru 4/15/09 - pull the worst color from the "overall status" column from that date range.
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
I have data in 3 columns: Name, Inclusion Date, Exclusion Date. In some instances, the inclusion date and exclusion date will be zeroed out - I do not wish to count those. What I would like to count is the rows that have an inclusion date, but not an exclusion date. Ideally, I would like to have a code so that when I run a macro a msgbox appears that indicates how many members there are.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I'm trying to use countif or similar to show how many times a given date is between 2 dates (inclusive). Each row of the spreadsheet contains amongst other info, a Start Date and an End Date. If i've got 2 rows like this:
I'd want to lookup 02/01/2009 and have it return 2 (02/01/09 falls between the dates on row 1 and the dates on row 2). To give some context, this is an export from a database containing staff holiday dates, and I'd like to be able to see how many people will be on holiday on any given date, given the start and end date of all holiday occurances throughout the year.
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales 23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long j = 1 For i = 1 To UsedRange.Rows.Count Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value j = j + 1 Next i End Sub
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE] ClassAB 1032 1511 2012 [/TABLE] Can this be achieved through a formula?
