i am looking for is a way to count 2 arguments so for instance in T3 how can i count all the "Impression cylinders" in range E10:E400 and the Number 8 in range B10:B400 so it counts in T3 then i can do the same in U3 for number 9 and so on. the only way i no is by using =(sum(IF(AND( But that would take years to write for every cell and every fault is there a shorter way
View 5 RepliesI have a column of values in "£"s and i need to count how many entries there are within a range. I have been able to do it with text but not money values with £ signs!!
View 2 Replies View RelatedHow can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
I am trying to do a basic count in a range, however am a little brain fried and its not working. On attachment, column D is to list all times out of column A and B listing only unique entries (have tried to use Macro with advanced filter however not liking it being an extract). Column E is to be a count of how many times the break time in Column D appears.
View 2 Replies View RelatedHow do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI have a tracking spreadsheet that covers the movement of people in a care facility. I have a COUNTIF string to cover the days of the month, however I need to find a formula to start off that string with, that will do the following:
If cell A6 (Last Name) is blank then do not count cells M6 through AQ6(my days of the month). If A6 has text then count M6 through AQ6 using COUNTIF formula I have in place, which is located in cell BC6
=COUNTIF(M6:AQ6,"")+COUNTIF(M6:AQ6,"HLV")+COUNTIF(M6:AQ6,"TLV")
+COUNTIF(M6:AQ6,"ADM")+COUNTIF(M6:AQ6,"RTN")+COUNTIF(M6:AQ6,"LCCN")
Master SS 31 DAYS.xlsm
I have two columns on sheet called back1! if a number is put in a cell from P5 down to P40 and a corrosponding number matches in K5 to K40 I want to be able to count it as 1.
So if a number is in k6 and a number is in P6 it counts as 1.
and so on down the cells.
I've got a table that contains a lot of text that i need to summarse in another table. Its really just two columns the first contains a group name and the second a result. What I need to work out is the number of times the result occurs for each group. But every work sheet function I've entered fails.
View 5 Replies View RelatedI am not sure how to go about this but here is my problem: text in cells a40:A147 containing card number this: -01- and cells h40:h147 containing and "x" if the card -01- is closed. Now I want to count all the -01- cards that do not have an x in the h40:h147 cells and I need to count all the -01- cards that do not have an "x" in the h40:h147 cells.
View 2 Replies View RelatedI have a bunch of cells that i want to count in a table based on 2 criteria. The first would be checking whether or not it matches a certain text which i can do. Now i have a column for "Completed Date" and "Deadline Date". Each deadline date is different. I know i need some sort of array function in there to compare all the completed dates vs deadline dates but i just can't think of it. This will be the second criteria.
View 3 Replies View Relatedi am trying to get totals from data and am using 2 different times to count from (eg. i am trying to find how many cells contain times in the 6:00 am to 2:30 pm range in the same column...I can't seem to be able to count these correct.
View 5 Replies View RelatedI am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Here is some code I have tried to no avail: ....
I have a spreadsheet designed for softball schedule for an entire league and am trying to come up with a way to count certain information so that I can figure out if the schedule is balanced. What I'd like is for a way to sum the number of games each team plays on diamond 3 or 4 and to sum number of games at 6:30/7:30/8:30
View 2 Replies View RelatedI currently have a sheet with Wins & Losses being identified with a L and a W
Example Colums b1 = w, b2=w, b3=w & b4 = L
Now if i want to do a total of the longest winning streak at the bottom of Column B How would i structure my formula to count multiple wins in a row.. Currently im just counting total wins but i also was to count winning streaks & losing streaks..
To count im using =COUNTIF(B$6:B22,"w") and =COUNTIF(B$6:B22,"t") for TIES and for losses im using =COUNTIF(B$6:B22,"l")
I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.
View 11 Replies View Relatedi have a list of employess who i need to count each month. i need a way i can say count if >0 for month = Oct. each employee has a summary of there work for a month in a list going down.
example
___John
Jan__0
Feb__19
Mar__50
___Bob
Jan__4
Feb__56
Mar__12
Right now i have a way i am summing up the total work for all the employees
"=SUMPRODUCT(B21:B512,--(A21:A512=A4))" <------'A4=Jan in the formula'
How could i change this to reflect count the employees and not sum the total? The idea is a need to know how many employees had a number greater then 0 for the month of Oct.
I have a table of data as below recording daily foreign exchange rates.
Column A = Time and date
Column B = USA
Column C = UK
Column D = Aust.
Column E = Japan
Column F = Euro
Time and date USA UKAust.JapanEuro
04-Jan-20060.68390.39180.924379.470.5693
05-Jan-20060.68660.39050.918779.720.5666
06-Jan-20060.68710.39150.919579.720.5675
Then in column H i have a formula that works out if the rate has exceeded a specified base rate, if it has i display Threshold Exceeded and if it hasn’t i display No Action Required.
OK from here i want to count the number of times in the month the Threshold has been exceeded. I can do this by using the countif formula.
Now this is the section i need help on
For a specified time, say a month, i want to count the maximum number of times the Threshold has been exceeded consecutively.
E.g
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
No Action Required
No Action Required
Threshold Exceeded
Threshold Exceeded
Threshold Exceeded
Result = 5 (max number of consecutive Threshold Exceeded” for a specified time frame)
can i use the countif question to make it count till a particular row based on the value . for instance if i want the countif till value 45 is met i.e i want countif to count till the row where 45 value is housed
VALUES 40404540403047
I am trying to set up a worksheet that shows shifts using a Capital "D" and a lower case "d" (one is for a 12 hour shift, the other for only 6 hours). Is there any way to set up a Countif formula that makes the distinction?
View 12 Replies View Related=IF(AND(Weekly!$E4<>Admin!$E$2,Weekly!$E4<>Admin!$E$3),
COUNTIFS('Issue Log'!$A$2:$A$50,$A4,'Issue Log'!$B$2:$B$50,$B4,'Issue Log'!$C$2:$C$50,'Issue Log'!$C2,'Issue Log'!$D$2:$D$50,"<>"&"Completed",'Issue Log'!$D$2:$D$50,"<>"&"",'Issue Log'!$D$2:$D$50,"<>"&"Cancelled"),0)
WEEKLY
ResourceProjectContact ActivityStatusEst. TimeAct. Time # of Issues
Elaine W.PIPBA - Bonnie SchaferTESTIn Planning1
ISSUE LOG
ResourceProjectActivityIssue Status
Elaine W.PIPTESTCompleted
[code]....
I have two columns - Employee and Status of Deal. Now, I need to get the total count of New and Active-to-date but on a per employee basis. Am I making any sense? To clearly put it, I need a formula that will answer the questions below:
How many New and Active-to-date deals does Michael et al have? I tried to use Countif but that gave me the total number of deals, not on a per status basis. Will VLookUp work or a combination of both? If so, how? I'm using Excel 2003.
On attached Spreadsheet, we are using Vlookup to create Team pages for coaches. Works great for giving coaches a team sheet when they leave draft. I have been aasked if we can cultivate the info a little differently for ubiform screenning. Company wants a count of sizes by position, that is everyone in position 1 will get number 40. How many #40 AS, AL, AM do we need.
There are 157 teams. SO I need to loop throgh each team, pull each size for each position and put it on Size sheet. I was thinking a vllookup/countif or sumif combo would work but have not been able to come up with it.
What i have is a list of dates in a row. I want to set up a countif formula to count the number of date that fall with in 90 days of todays date. I'm planning on placing todays date in a cell in the upper left hand corner (cell A2) above the list of dates. This way i can just type in todays date and the spreedsheet will count the number of dates, in the list, that fall with in 90 days of the date i type into cell A2
View 2 Replies View RelatedI want to be able to look at two columns and set a criteria to count. I want to look at column A and if its blank then look at column B and if it has a value of more than 0 then count.
A B
1 1.00
2 Yes 4.78
3
4 5.00
5 Yes 4.89
6 11.99
So this example would count 3
What formula will count the number of times the value J3 appears in E2:E400. BTW...the a-g is formatted as a table. excel 07
View 3 Replies View RelatedI am trying to use COUNTIF formula to count how many item in a column that meet certain criteria, say between 10 and 20...
=COUNTIF(G1:G100,"AND(>10,<20)")
Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
We have one excel file for monitoring of action items generated by the management after the study. As since there were around 3000+ rows has been generated since in the beginning of 1990's till to-date. So I was thinking of instead of getting the result through filter manually, I want to create a formula that will count of how many has been closed this year and this month out of the total numbers of action items.
Is it possible to use the COUNTIF function formula to count the number of items in column A, and date of column B, and closed in column C.
In below, we can see that there were 4 items under Revalidation has been closed this month and the total number of closed this year is 6.
TYPE
MTD Closing Date
Status[code]......
=COUNTIF(Sheet1!$A$1:Sheet1!$A$32515, IndexSheet!B2)
+COUNTIF(Sheet2!$A$1:Sheet2!$A$32515, IndexSheet!B2)
+COUNTIF(Sheet3!$A$1:Sheet3!$A$32515, IndexSheet!B2)....
+ COUNTIF(Sheet20!$A$1:Sheet20!$A$32515, IndexSheet!B2)
Above formula check for the value in IndexSheet!B2 and searches it across all 20 sheets and returns total sum
Is there any shorter version of this?
I have a sheet in which in Coloum A I have manager names, then in Colum B I have list of Employees reporting to that manager, then in Column C, I have total login time of each employee which should be => 8 hours. In a new sheet, I want to get the count of employees next to the each manager's name who login time is less then 8 hours.
View 3 Replies View Related