I have a table of data that is laid out in multiples of two columns. I have attached a simplified example. Essentially all I need to do is count the contents of every second cell when it equals a specific value. If you look at my attached example it will be clearer. how I can do this using formula? (I don't want to use VBA in this instance).
View 7 RepliesI need to sum the contents of every fourth cell in row A .... ie sum(A1 + E1 + I1 ... BY1)
Can I do this via the formula bar, or do I need to use a VBA routine?
I have a row range to sum only alternate cells.
How can i do this job by means of formula.
I can't remember any formula to do the task. I have a time series with quarterly sales. The dates are in format given below.
01/01/1990 - first quarter of 1990
02/01/1990 - second quarter of 1990
03/01/1990 - Third quarter of 1990
04/01/1990 - fourth quarter of 1990
I need to add the sales of all first quarters , all second quarters..and so on.
Is there any formula that an elegant way or I have to do it manually?
Is there any possibility to protect alternate cells of column see below for example. I want to lock cells B1, B6, B11 and B16 only so that no one is able to delete the average rate.
A B
average rate0.0
1
1
1
1
average rate0.0
1
1
1
1
average rate0.0
1
1
1
1
average rate0.0
1
1
1
1
I have a spreadsheet for work rosters. Each person on the roster has a row with info on what they're doing for a given week. Split into the am and pm session of each day.
All I want to do is be able to fill the row with the same value if they're doing the same thing for the week - eg if they're on leave, I'd like to hit CTRL-L and have the row populated with 'LEAVE' in each alternate cell, rather than typing it manually. Note that it is each alternate cell, not each cell as the alternate cell has different info.
So a row would look like this:
Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |Leave | blank |
For the am and pm session of the five working days. And just to complicate matters, each 'cell' on my spreadsheet is actually 4 merged cells, and the alternate 'cell' that I want left alone is two merged cells! This is the macro generated when I do a simple record - it does what I want, but obviously jumps to the original row that I recorded it in whenever I run it - I need it to fill the row that I start it from. I recorded starting in cell I133:L134
Would like a script that will go to each sheet in the workbook, and fill in light grey background, each alternate row that contains data, EXCLUDING the 1st row (header row).
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example:
loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5.
... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I have tried to go around the long way to achieve this but came up with pages of pointless code .... I know there is a better way I just dont know enough about VB to do it myself ... And I know this is EASY for many :-)
--------
Cell ranges h11 to as11 are a totals row.
If the total is 0, colorindex is set to vbpatternnone, if >= 1, then colorindex is set to vbpatterngray. Easy right ? I just dont kn ow how to do FROM/IF/DO range loops...
--------
Details:
The code in worksheet_SelectionChange will contain the following:
1: From range h11 to as11, variable1 = application.interior.colorindex of the cell.
2: Check if the cell is >=1 or <=0 ....
3: If >=1 then set application.interior.colorindex = vbpatterngray. Go to #5.
' (This inserts a pattern over the original color of the cell)
4: If <=0 then set application.interior.colorindex = vbpatternNONE
ALSO set application.interior.colorindex = variable1
' (This clears the cell pattern and returns it to original color)
5. Repeat steps to clear cell pattern and restore color / or insert pattern for all cells from range H11:AS11
6. End sub
I am wondering if it possible to automate the copying of data from particular cells, based on a value in a different cell, into a different format.
So to go from this simplified table:
AB1NameLevel2Arthur2a3Briony3c4Catherine3b5David3a6Edward2a7Felicity3c8George3c
to something like this:
FGHI12a3c3b3a2ArthurBrionyCatherineDavid3EdwardFelicity
4
George
At the moment I do it all manually, and it takes forever. I am sure there must be a simple way of doing it. I am using Excel 2003, but could work in a newer version if required.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedWhat i want to do is count but only if another cell meets a certain criteria,,
Let me explain better,,what i want to do is count the number of 'Completed' cases by each individual, i.e. count if the cell A1 = Completed and B1 = Kevin and the same for 'Pete'
I'm sure i need some sort of nested =IF AND formula but just can't think how the nesting should look.
B
CompletedKevin
CompletedPete
CompletedPete
Parked Kevin
SubmittedKevin
CompletedKevin
Started John
With AdviserPete
With AdviserPete
Started John
Started John
I have a formula =IF(AND(F14=3,G14<2)=TRUE,1,"") which is in cell J14. I also want to 'add' to this formula an 'or statement' (I am not sure of the terminology, so taking a shot in the dark). So it would continue to complete the calculation as normal, but if there is a '1' in K14 it would also output in J14 as a 1
View 2 Replies View RelatedCan I use a CountIf formula to count coloured cells that have been formatted? I tried to use a CountIf formula to count the % but because some of the warning and failing % are different that would distort my results.
View 2 Replies View RelatedI've setup a worksheet whereby rows can be Autofiltered between a start and finish date via a Userform which (after much mucking about with UK/US dates) seems to be working nicely now. With the results of the Autofilter, i wish to count certain entries (in this case entries that are in column F) in the remaining visible rows.
The Workbook is about 'Cases' worked, and column F relates to how the 'Case' is cleared (Call, Letter, Referral). Effectively I want to be able to count 'Call', 'Letter' and 'Referral' entries once the Autofilter has been applied.
i have this formula:
=COUNTIF(INDIRECT(A2&"_RES"),"Yes")
A2 refers to a cell to complete the indirect query (DCA_RES) which refers to another range in the workbook.
Now I want to have count if A2&"_INIT" is "BB" AND if A2&"RES" is "YES"
So that I get the amount of records of resolved queries (Yes) that match my Initials (BB).
I cant think of a different formula that might work?
I have thousands of cells which contains 11 digit numeric number as primary key (suppose 19131804002). Now I want to count the cell if it contains first 4 numeric number is same (as here 1913).
View 4 Replies View RelatedI'm trying to count the number of times a pupil gets a detention which has been rescheduled.
In the main worksheet below I want to be able to count instances like the one on row 11 where John Smith has had a rescheduled detention.
I want to be able to connect this rescheduled detention to John Smith on a different worksheet in the same workbook. On the screenshot below I would like to have Column D as a running total of rescheduled detentions.
I have tried all sorts of permutations of the COUNTIF function but without success.
How do I write a nested COUNTIF formula ( assigning a value of 1 for each cell) for a range of cells that does NOT contain "", "OFF", or "REQ OFF" ?
For example:
A row of 20 cells (A1:A20), 5 are blank (""), 3 contain the text "OFF", 4 contain the text "REQ OFF", and the rest contain anything other than the three values just mentioned.
I need a sum number for all the cells in that row that contain any other value. In this example, the output value should be 8. Out of 20 cells in the row, a total of 12 cells had either "", OFF, REQ OFF, and the remaining 8 had some other value that did not equal those.
Some sort of COUNTIF(AND(... Can't seem to figure this one out.
I am tracking 3 different payment types, and the employee, customer and dollar amount for the transactions that can not be verified. All of this data is then transferred over the the "Summary" sheet. I found the Countif formula that will tell me how many times an employee names appears on the sheet, but I was wondering if it were possible to also calculate the dollar amount associated with those transactions.
I have attached the spreadsheet to better explain what I am talking about, but below is a very small example. I do not want to calculate the info on this page, but rather add another 2 cells next to where the number of unclaimed and the % of unclaimed are calculated on the "Summary" sheet. Sample spreadsheet2.xlsx
A B C D
1 Date EmployeeCustomer $
2 1-Jan MonicaJohn Doe $65.00
3 2-Jan AshleyJane Doe $85.00
4 3-Jan MonicaJustin Doe $15.00
5 4-Jan MonicaJessica Doe $135.00
6 5-Jan AshleyJeremy Doe $100.00
7 6-Jan CheriJustine Doe $50.00
8 7-Jan CheriJace Doe $450.00
9 8-Jan JudyJackie Doe $50.00
10 9-Jan MonicaJake Doe $65.00
11 10-Jan JudyJennifer Doe$85.00
how to set up a formula that would count the number of numbers in a column, only if the cells before those cells are blank. In plain English: total the number of occurences in each column, provided the value in cellrow is the first occurence in that row starting at column A. E.G
A
B
C
D
John
x
x
Dave
x
x
Kyle
x
x
Bob
x
x
Count would return under Column A, 1; under Column B, 1; (because row John has a value in AJohn it is ignored), under Column C, 2; under Column D, 0.
I am attempting to create a staffing calendar that will use conditional formatting to alert the coordinator by highlighting the cell when certain thresholds are reached.
The spreadsheet has three tabs, with 'Master' being the final copy.
In the 'Magic' tab, I was able to get it work with a rolling count but I am having trouble recreating it when the count is stationary and not updating itself line by line aside the person's name.
What I'm preferably looking to have happen is for the 'Name' to light up when it appears more than 3 times in a week in the Day fields, more than 1 time a week in the O/C field and more than 7 times a month in the Night field.
I want a cell to countif the sum of two adjacent cells is greater than the number in another cell so for instance
Count if f101+g101 is greater than the number stored in cell u12, repeat this for cells f102+g102, right down to f50100+g50100.
example of what I'm trying to do:
"if the number in G6 is <800 and H6 is >=20 then count the row as 1"
I am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Here is some code I have tried to no avail: ....
I am trying to count the number of time the 15th and the 28th of the month show up in Column A. Column A is in date format but not all cells have a date. In this example I am only looking for the 15th but in the end I want the combined count of both.
This formula gives me a count of 1
=(COUNTIF(TimeSheets!A1:A119,"3/15/2012"))
These return 0
=(COUNTIF(TimeSheets!A1:A119,"*15*"))
=(COUNTIF(TimeSheets!A1:A119,"*/15/*"))
Or any other combination of wildcards with * or ?
Maybe there is something other than COUNTIF I can use.
DateThursday, March 01, 2012Friday, March 02, 2012Saturday, March 03, 2012Sunday, March 04, 2012Monday, March 05, 2012Tuesday, March 06, 2012Wednesday, March 07, 2012Thursday, March 08, 2012Friday, March 09, 2012Saturday, March 10, 2012Sunday, March 11, 2012Monday, March 12, 2012Tuesday, March 13, 2012Wednesday, March 14, 2012Thursday, March 15, 2012 Total Hours WorkedHours In This Pay Period
Is there a way to count cells that show up with the "Not Available Error", or even better, is there a formula that will count all cells in range range, except those with the "Not Available Error".
View 5 Replies View Relatedhow do to count the number of occurrences of a text string in a range of cells, where some cell have comma delimited entries?
I am trying to count the number of times a project number is identified in a column of cells. However, in any row in that column a cell may have multiple project numbers referenced, separated by commas.
Using countif Excel thinks that the cell has a different entry and it won’t include it in the count even though the criteria string is in the cell.
I want to be able to count the number of cells which meet a specified criteria.
The COUNTIF function works if I enter the criteria manually within a COUNTIF formula. But the function doesn't seem to work if I try to reference criteria from another cell.
For example, suppose the range of cells I'm searching for matches within has been named
Possible_outcomes .
In addition, the criteria I'd like to use is in a cell called
PROFIT_THRESHOLD,
and is the result of a formula. Let's say the formula result equals 130.
Countif works when I enter the criteria manually, i.e.
=COUNTIF(Possible_outcomes,">=130")
But it returns only a 0 when I write the formula as
=COUNTIF(Possible_outcomes,">=PROFIT THRESHOLD")
I can't make the function work even if the criteria is in a cell which is not named either.
This is a serious obstacle to model automation.
I have a range that contains a mixture of hard coded data and data pulled from a database sheet. I want to average only the hard coded data not the ones in the cells containing formula. I need this to be dynamic instead of just selecting the cells as formula might be added later on.
View 1 Replies View Related