Countif For Two Adjacent Cells But For A Range

Jan 2, 2014

I want a cell to countif the sum of two adjacent cells is greater than the number in another cell so for instance

Count if f101+g101 is greater than the number stored in cell u12, repeat this for cells f102+g102, right down to f50100+g50100.

View 2 Replies


ADVERTISEMENT

Only Countif Cells Adjacent To Columns Contains A Blank?

Apr 22, 2014

I have a formula (below) where I want it to count the cells that contain a date that is less than or equal to today, but only when the adjacent cell is blank. The latter part of the formula works, but I'm struggling to tell it to only do the count when cells in column I are blank;

=IF('QS12'!I10:I3120="",COUNTIF('QS12'!H10:H3120,">="&TODAY()))

View 9 Replies View Related

SUMIF/COUNTIF- Several Numbers That Are Contained In Non-adjacent Cells

Jan 9, 2008

I have several numbers that are contained in non-adjacent cells. I need to create a cell that will evaluate the cells individually to make sure that they are within a certain range. Once that is done, I want the remaining numbers that are within the range to be averaged. How the heck can I accomplish this task? SUMIF and COUNTIF will not allow me to use non-adjacent cell ranges.

View 9 Replies View Related

Countif Statement: Count The Number Of Cells That Have A Value Greater Than 0 In A Range Of Cells

Jun 23, 2009

How do I count the number of cells that have a value greater than 0 in a range of cells?

View 2 Replies View Related

Select A Range Of Non-adjacent Cells

Jun 29, 2006

I have a series of data values in non-adjacent columns in an excel spreadsheet.

In the following example, assume the | (vertical bar) refers to the start of
a new cell:

F|45|A|30|F|15|F|10

Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.

SUMIF(A1:G1,"F",B1:H1)

What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?

View 12 Replies View Related

Countif But Columns Not Adjacent

Jan 8, 2009

I have a spreadsheet where I need to count the # of times the value 1 is in a row, but the columns that I need to check is every other column.

View 3 Replies View Related

A Formula That Searches A Range And Gives The Sums Of The Adjacent Cells!??

Jun 23, 2009

I am looking for a formula that searches a range of data and then returns the sum of the numeric values in the adjacent cells. I have a calendar style spreadsheet with 2 columns for each day. In the first column it has a list of names and the second column a number.

I would like a cell to return the sum of the numeric values next to each name. All the names are entered into the columns randomly and are unorganised. The same name will appear multiple times in the range and have different numbers next to it each time. I am currently using (for example) =COUNTIF(H6:AL14,"bob") to tally up the number of "bobs" but really what i want to do is find a formula that in plain english does:

Search a range of columns and where cell = "bob" take the value of the adjacent cell (to the right) and total them up!

i have attached an image - i hope it makes sense what i'm trying to do - i would like Q3 to total up the numbers to the right of all "bobs" across all the days - so it should return 42

View 2 Replies View Related

Sum Range Of Cells If Date In Adjacent Cell Is Last Month

Jul 25, 2012

I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).

View 7 Replies View Related

Search Range, Return Adjacent Cells Of Matches

Jun 21, 2007

I can solve my problem with a pivot table, and with VBA easily...however, I'm interested in knowing if this can be done with formulas (array formulas using index/match I'm assuming).

Goal: On sheet1 I have one column with products, then the column next to it will have an "Y" in it if the product is to be selected (blank if not). On sheet2 I want to create a list of the products that were selected (having the "Y"). The only thing stumping me is that I do not want spaces between the product list on sheet2...just a nice continuous list. Example:

Sheet1
cup Y
bowl Y
spoon
fork
knife Y

Sheet2

cup
bowl
knife

..not..

cup
bowl
knife

View 4 Replies View Related

Find Median In Range And Bring Back Adjacent Cells

Jun 25, 2014

Median Indirect: I would like to find the median in a range of cells and then bring back the 2 adjacent cells

Range...............Adj Cell 1............Adj Cell 2
1.......................L1......................L2
2.......................P3......................P4
3.......................O9......................010

So the median of the range is 2, thus we would want the formulas to bring back P3 and p4

Column 1..............Column 2
P3...........................P4

View 12 Replies View Related

CountIf Macro Identify When Cells Are >= 90% In A Range

Jan 12, 2010

I need a macro to identify when cells are >= 90% in a range, and count them. Then put the result in cell Z58. Range is I51,L51,O51,W51,Z51. i.e if all cells are 90% then put value of 5 in cell Z58. Here is code i have that isnt working:

View 3 Replies View Related

Countif Formula For Multiple Variables In The Same Range Of Cells

Jun 4, 2014

I have a drop down list in a column called Report Type (example below).

Report Type - Drop-Down Menu in Column F
Business/Operational/Work Plan
Budget Report
Performance Report
Program Quarterly Report
Program Mid-Year Report
Program Annual/Year-End/Final Report
Service Quarterly Report
Service Mid-Year Report
Service Annual/Year-End/Final Report
Financial Quarterly Report
Financial Mid-Year Report
Financial Annual/Year-End Report
Auditied Financial Statements
In-Year Reallocation
Annual Reconciliation Report
SRI Report
Other Report

I need to count all the cells that have: Budget Report, Financial Quarterly Report, Financial Mid-Year Report, Financial Annual/Year-End Report, Audited Financial Statements, In-year Reallocation, and Annual Reconciliation Report

Is this possible with a countif formula?

View 4 Replies View Related

Copy Non-adjacent Cells In A Row From One Spreadsheet To Adjacent Rows In Another

Jan 5, 2014

I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.

The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:

Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)

The data in the sheets are not in that order, of course.

That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)

Here is the code snippet where the copying is done:

Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long

[Code] ........

ExitTheSub:

Application.Goto Sheets("KMARollup").Cells(1)
End Sub

I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.

View 2 Replies View Related

Countif (extract The Number Of Times A Name Appears On A Certain Range Of Cells On A Worksheet)

Jul 30, 2008

I am trying to extract the number of times a name appears on a certain range of cells on a worksheet, now I can get this to work, but I am sure there is a better way I just cant get it to work!

=SUM(COUNTIF(sales1!$B$8:$F$11,A18),COUNTIF(sales2!$B$8:$F$11,A18),COUNTIF(sales!$A$8:$B$11,A18))

I have only used 3 pf the worksheets, but in time there could be up to 30.

View 4 Replies View Related

IF COUNTIF- To Determine That If A Range Of Cells Are Marked With An "X"

Feb 8, 2008

I am trying to determine that if a range of cells are marked with an "X", then cells containing "Pass" (A4), Pass with Opportunity for Improvement (A6)or "Fail" (A8) will be marked with an "X". I have 3 columns that are selectable for Pass, Fail, and Non-Applicable. There are a total of thirteen questions that this evaluation form asks, and the evaluator must check one box. In order to be considered a Pass, there must be more 12 or more "X"'s marked in the Pass column. A Pass with Opportunity for Improvement would be equal to 11 marked in the Pass column, and a Failure would be 10 or less showing up in the Fail column. If there is a check in the non-applicable section, this has to be figured into thye pass fail as well. A Pass would be 85% or higher, and failure anything less than this. I will attach the file for review. I would very much appreciate help on this problem first, and then there is one other element to the sheet that plays in at the end.

View 13 Replies View Related

Excel 2010 :: Return Min Date In Range Where Adjacent Range Is Blank?

Feb 7, 2014

I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.

A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob

View 4 Replies View Related

Highlighting Cells If Specific Data Appears In Adjacent Cells

Mar 18, 2014

I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.

View 3 Replies View Related

Merge Date From Adjacent Cells Inbetween Current Cells

Nov 17, 2009

I have 2 columns of data and want to be able to merge as follows

COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32

need to get result of

COL a
4123567
123.45
4125467
900.56
4356456
456.32

View 4 Replies View Related

2003 - Merging Four Adjacent Cells With Text And/or Blank Cells

Jun 14, 2008

I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).

I would like a comma or full stop and then a space between each item merged (cell A5).

The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.

Only where all 4 cells are blank, will I need cell 'A5' to indicate this.

The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.

View 9 Replies View Related

Color Cells Based On Adjacent Cells Being Empty & Add Text

Apr 2, 2008

I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!

http://img530.imageshack.us/img530/6239/excelspfk0.jpg

View 9 Replies View Related

Fill Empty Column Cells With Reference To Adjacent Cells

Aug 11, 2008

I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.

I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.

View 9 Replies View Related

Non Adjacent Columns In A Range

Nov 5, 2013

I am trying to use defined range names in a vlookup function. The target ranges contain non-adjacent columns. The formula wizard gives me an error msg "#value" and the vlookup returns #N/A.

View 2 Replies View Related

Select Adjacent Range ..

Jul 30, 2008

I only want to select the adjacent range from

Range("A2", Range("A2").End(xlDown)) to the left

View 11 Replies View Related

Calculating Sum Of Cells Only Where Adjacent Cells Are Blank

Oct 17, 2008

Code:.....

I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.

View 4 Replies View Related

Total Cells Based On Adjacent Cells

Jun 28, 2008

I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.

Here is an example spreadsheet to help explain

I have attempted this by writing this formula ...

View 3 Replies View Related

Lookup Value And Copy Adjacent Range

Jan 11, 2010

I have three columns (A to C) with contineous data (# rows always variable).

I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.

After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.

View 9 Replies View Related

Copying Non-adjacent Selections To End Of Range

Jun 21, 2006

I am using code that will copy several formulas in adjacent cells to the end of range; however, when I try to use it to select and copy formulas in non-adjacent cells, I get an error. Tried to modify, but I'm new to VBA...still learning. Here is the code that I currently have.

Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
Range("D3").Formula = "=RC[4]/RC[3]"
Range("F3").Formula = "=RC[-1]*RC[1]"
Range("J3").Formula = "=RC[-1]/RC[-3]"
Range("D3,F3,J3").Copy Range("D3,J" & LastRow)

View 6 Replies View Related

Sum Up 5 Adjacent Cells

May 16, 2006

As per the attached file – I am trying to mark (with an X) the first 5 Adjacent cells which SUM up (and above) 480. As you will see, in some instants, one of the 3 formulas is correct. I am looking for a formula to work correct IN ALL situations.
In Col. A I marked (light Blue Background) the FIRST 5 cells which meet the Condition. In Col. F are the sum results and those which meet the Condition
are in Bold RED.

View 2 Replies View Related

Copy Active Cell Down Adjacent Range To Right

Apr 17, 2009

Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-

View 5 Replies View Related

CountIf Within A Range...

Feb 3, 2009

- Column D includes dates.
- Column E includes text, either "Yes" or "No".

I want Excel to count all cells in Column D between 1-Jan-2009 to 31-Jan-2009 + any cells that say "Yes" from Column E on the same row.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved