# Counting Blank Cells And Countifs

Jan 18, 2013
I have a spreadsheet that is used to capture information about Service Requests that my team handles in a 6 month period. At the end of January, the metrics for January will be added and the metrics for July will "fall off".

I need to be able to calculate the number of requests that were still active for each month. The formula I have created for this is below:

=COUNTIFS(Table1[Date Submitted],"Month Beginning of the First Month Being Reported", Table1[Date Closed], ">A Day Before Current Month Closing")

So, if my reporting period was July 2012 to December 2012, my formula for December would look like:

=COUNTIFS(Table1[Date Submitted],"7/1/2012", Table1[Date Closed], ">1/6/2013")

This accounts for anything that was opened in the months that was not closed before the month closing of the current month being reported.

I have two issues that I'm having with this formula:

1. The formula does not take into account the Service Requests that do not have a date in the "Date Closed" columns. Is there a way I can also count the items that have a blank "Date Closed"?

2. This formula will have to be changed every time a month "falls off". For example, when the reporting period changes from July to December to August to January, the formula for December will change to:

=COUNTIFS(Table1[Date Submitted],"8/5/2012", Table1[Date Closed], ">1/6/2013")

Is there a way I can have it change automatically without me having to do it manually?

View 1 Replies
ADVERTISEMENT
Aug 3, 2013

I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.

ORIGINAL FORMULA

=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "

View 1 Replies
View Related
Feb 4, 2010

I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?

View 2 Replies
View Related
Nov 25, 2006

I am trying to write a formula for the following can anyone help please?

I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer.

This will tell us all the outstanding purchase order older than 3days

View 9 Replies
View Related
Nov 4, 2009

I have recorded the data from 12 records (i actually have hundreds, but im just using a small sample). Each record is represented by a vertical column. I want to find the total number of "x's" for only the records from Country1 (from all the answers). Then I want to find the number of "x's" from only Country2. I have tried the "countifs" function but cannot find a way to make it work. Would a different array function be better? How would I write it?

P.S. The answer for Country1 should be: 15.

The answer for Country2 should be: 5.

View 10 Replies
View Related
Apr 18, 2014

Using COUNTIF/COUNTIFS how to counting data with 3 mode ;

name

property

checking

[Code]....

I want to count with criteria based on adjacent value "name" column related with "checking" column

1) counting data "name" with "yes" criteria?

2) counting data "name" with "yes" & "no" criteria?

3) counting data "name" with blank "" criteria?

4) counting data "property" with criteria contains "name" and "yes" criteria

View 9 Replies
View Related
Apr 13, 2013

I have a Colom with dates, some cell are coloured and others not, some of the non-coloured cells have dates and some not. I would like to count ONLY the non-coloured cells without dates in them.

View 6 Replies
View Related
Sep 1, 2009

I am trying to put together a table from which I'll attach a chart showing-at a glance-where open complaints are in our process:

are they open, closed, waiting for samples, waiting for QC, QC'd pending admin approval, etc.

my log consists of a lot of columns which track various pertinant info about each complaint. Such as A-complaint ID, B-date opened, C-date closed, K-initial QC investigation, L-final QC, M-admin status (pending/approved/denighed), N-notes (boiler plate notes like "pending ra samples" or "closed").

I used this formula alot in my various analyses =SUMPRODUCT(--(YEAR(Log!open)=$O74),--('ComplaintLog (101408).xls'!iqc="pending")) without issue.

Until now. I want to search multiple criteria starting with the year (2009, in this case) and whether or not the issue is closed (date in column C). Only need a count.

How do I append the sumproduct formula? I've looked at isblank but get crazy results from #value to #name to 340 (I only have 292).

View 5 Replies
View Related
Nov 29, 2011

PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca

Tab1

PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca

Tab 2

I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.

=IF('tab1'!E2="","",'tab2'!E2)

View 3 Replies
View Related
Feb 24, 2009

I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)

I have the following formula which follows these steps when i evaluate it.

=VLOOKUP(K10&O10,$J$77:$K$98,2,0)

=VLOOKUP(" "&O10,$J$77:$K$98,2,0)

=VLOOKUP(" "&" ",$J$77:$K$98,2,0)

=VLOOKUP(" "$J$77:$K$98,2,0)

#N/A

How can i deliver a blank cell as the answer?

View 9 Replies
View Related
Aug 27, 2009

see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.

View 2 Replies
View Related
Dec 9, 2009

I have a simple date formula that I want to present "yes" in a cell when another cells date is less then or equal to "Today". I just can't figure out how to make it show my result cell as blank if my date cell is blank?

here is my formula....

=IF(G8 <= TODAY(), "YES", "")

View 2 Replies
View Related
Sep 5, 2009

Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.

The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?

View 4 Replies
View Related
Jan 19, 2012

I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.

Code:

=COUNTA(Mem!$M:M)

The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6

View 2 Replies
View Related
Mar 21, 2012

I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".

View 9 Replies
View Related
Apr 2, 2008

why it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.

View 6 Replies
View Related
May 29, 2013

I have the following table

Team>

Team A

Team A

[Code].....

I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere

April

May

Team A

6

1

Team B

11

1

View 2 Replies
View Related
Jul 22, 2014

I have the following formula which counts number of days between dates in two adjacent cells excluding holidays

=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1

The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.

I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1

However if no date is in both fields it count -1 (minus one)

If a date is just in one field it counts a very high number, example below.

-1

16/07/2014

-29879

20/06/2014

08/07/2014

12

[code].....

is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?

View 3 Replies
View Related
Oct 18, 2009

I know this question may have been posted before, but I can not seem to get this to work with my formula. I have a formula to count the values of a column so that I can convert it to a graph. I am giving a value of 1 to cells that contain numbers between 0 and 9.5 and giving a value of 0 to cells that contain numbers greater than 9.5. It works fine except that I have some blank cells that I do not want to get rid of and it is counting those as zeros and giving them a value of one. I want to ignore the blank cells or give them a value of zero.

=IF(AND(F2>=0,F2

View 9 Replies
View Related
Apr 11, 2014

I am looking for a COUNTIFS that is only looking only at the visible cells. I have found a few threads on this subject but none for this specific problem.I know there is a SUMPRODUCT / SUBTOTAL excel solution for COUNTIFSing visible cells only. How modify it to take multiple ranges and criteria like CONUTIFS does.

[Code].....

View 6 Replies
View Related
Feb 22, 2014

Somehow I cannot seem to count data in a column (e.g C) where cells are populated from a data validation list. The same formula works when I manually populate the same data in another reference column (e.g J). I have tried both COUNTIFS and SUMPRODUCT but they dont seem to work

=SUMPRODUCT(--($C$4:$C$9995=AB3),--($G$4:G$9995

View 2 Replies
View Related
May 18, 2009

I created the following in Excel 2007 but need to come up with a replacement formula in 2003.

=COUNTIFS('Data High'!AM2:AM999,"0",'Data High'!AN2:AN999,"Non Corp",'Data High'!AL2:AL999,"No")+COUNTIFS('Data Medium'!AI2:AI2000,"No",'Data Medium'!AJ2:AJ2000,"0",'Data Medium'!AK2:AK2000,"Non Corp")+COUNTIFS('Data Low'!AA2:AA5000,"No",'Data Low'!AB2:AB5000,"0",'Data Low'!AC2:AC5000,"Non Corp")

With this spreadsheet i pull data straight from a database and place it in to 3 separate worksheets. The first worksheet which is the summary sheet then updates all the totals of certain occurrences. The above formula is the same format for all fields in the summary with a few variations. But they all have the following in common. They draw data from all 3 worksheets and total it all up, and each countifs looks at 3 different cells.

In terms of replacing it i have tried to use something like =SUMPRODUCT(--('Data Low'!AA2:AA5000="No")*('Data Low'!AB2:AB5000="0")*('Data Low'!AC2:AC5000="Non Corp")) but don't seem to be getting it right.

View 2 Replies
View Related
Oct 17, 2013

So, in general I do have two columns F and G taken from the other xls.

Age is obviously difference between today and open date

Open date is open date.

I made a table like:

Age and due date.png

In this case, I have 3 rows where there is no open date extracted, therefore is no age. The counter stops on them and shows 529 in total instead of 532 or shows the age as far more than 365 days. How can I count the blank cells, but only in the range of the list I do have, not the all blanks I have from the beginning till the end of the column, so I could (for similar in this case) have 3 blanks cells counted?

Sometimes is also stuck in the middle of counting (when blanks are inside there) and the total number is even smaller. What function can I use to count these 3 (or less, more inn the future) as BLANK to have the total numbers realistic?

View 6 Replies
View Related
Nov 9, 2009

The code down below counts all cells from column A2 to I11. The problem; the code should stop counting if there is a blanc cell in a column and go to the next column to countinue. My query; how should the code be modified so it will stop counting if there is a blanc cell.

View 4 Replies
View Related
Jul 7, 2014

find the attached excel 2010 file <Count LBP or UBP.xlsx>.

My requirement is if `LBO' is available (in Column A) then the formula should count the number of `LBP' available above the `LBO' upto the blank cell. If there is no `LBP' above the `LBO' then it should plot zero in Correponding Column B Cell. If 2 `LBP's available above the `LBO' upto balnk space it should plot `2' in Correponding Column B Cell.

As like `LBO' and `LBP' the formula should work for `UBO' & `UBP'. refer the attached excel file.

View 6 Replies
View Related
Jan 13, 2014

Ok so my named range looks like this:

[Code]....

However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:

[Code]....

How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.

View 4 Replies
View Related
Aug 2, 2014

I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.

View 8 Replies
View Related
Apr 17, 2008

I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.

View 4 Replies
View Related
Jul 15, 2008

I can count the blank cells withiin a range using

=COUNTBLANK(C6:AD2506)

But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.

It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.

View 14 Replies
View Related
Mar 12, 2014

I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.

View 8 Replies
View Related