I have a simple date formula that I want to present "yes" in a cell when another cells date is less then or equal to "Today". I just can't figure out how to make it show my result cell as blank if my date cell is blank?
here is my formula....
=IF(G8 <= TODAY(), "YES", "")
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014
08/07/2014
12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?
View 2 Replies View RelatedI am trying to write a formula for the following can anyone help please?
I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer.
This will tell us all the outstanding purchase order older than 3days
I have a Colom with dates, some cell are coloured and others not, some of the non-coloured cells have dates and some not. I would like to count ONLY the non-coloured cells without dates in them.
View 6 Replies View RelatedI am trying to put together a table from which I'll attach a chart showing-at a glance-where open complaints are in our process:
are they open, closed, waiting for samples, waiting for QC, QC'd pending admin approval, etc.
my log consists of a lot of columns which track various pertinant info about each complaint. Such as A-complaint ID, B-date opened, C-date closed, K-initial QC investigation, L-final QC, M-admin status (pending/approved/denighed), N-notes (boiler plate notes like "pending ra samples" or "closed").
I used this formula alot in my various analyses =SUMPRODUCT(--(YEAR(Log!open)=$O74),--('ComplaintLog (101408).xls'!iqc="pending")) without issue.
Until now. I want to search multiple criteria starting with the year (2009, in this case) and whether or not the issue is closed (date in column C). Only need a count.
How do I append the sumproduct formula? I've looked at isblank but get crazy results from #value to #name to 340 (I only have 292).
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab1
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab 2
I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.
=IF('tab1'!E2="","",'tab2'!E2)
I have a spreadsheet that is used to capture information about Service Requests that my team handles in a 6 month period. At the end of January, the metrics for January will be added and the metrics for July will "fall off".
I need to be able to calculate the number of requests that were still active for each month. The formula I have created for this is below:
=COUNTIFS(Table1[Date Submitted],"Month Beginning of the First Month Being Reported", Table1[Date Closed], ">A Day Before Current Month Closing")
So, if my reporting period was July 2012 to December 2012, my formula for December would look like:
=COUNTIFS(Table1[Date Submitted],"7/1/2012", Table1[Date Closed], ">1/6/2013")
This accounts for anything that was opened in the months that was not closed before the month closing of the current month being reported.
I have two issues that I'm having with this formula:
1. The formula does not take into account the Service Requests that do not have a date in the "Date Closed" columns. Is there a way I can also count the items that have a blank "Date Closed"?
2. This formula will have to be changed every time a month "falls off". For example, when the reporting period changes from July to December to August to January, the formula for December will change to:
=COUNTIFS(Table1[Date Submitted],"8/5/2012", Table1[Date Closed], ">1/6/2013")
Is there a way I can have it change automatically without me having to do it manually?
I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)
I have the following formula which follows these steps when i evaluate it.
=VLOOKUP(K10&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&" ",$J$77:$K$98,2,0)
=VLOOKUP(" "$J$77:$K$98,2,0)
#N/A
How can i deliver a blank cell as the answer?
see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.
View 2 Replies View RelatedUsing formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code:
=COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".
View 9 Replies View Relatedwhy it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.
View 6 Replies View RelatedI have the following table
Team>
Team A
Team A
[Code].....
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
April
May
Team A
6
1
Team B
11
1
I know this question may have been posted before, but I can not seem to get this to work with my formula. I have a formula to count the values of a column so that I can convert it to a graph. I am giving a value of 1 to cells that contain numbers between 0 and 9.5 and giving a value of 0 to cells that contain numbers greater than 9.5. It works fine except that I have some blank cells that I do not want to get rid of and it is counting those as zeros and giving them a value of one. I want to ignore the blank cells or give them a value of zero.
=IF(AND(F2>=0,F2
I have a column with dates in it. Example "04/04/2007" don't know if format will matter that is why I am showning an example.
I need a formula that looks at that column and tells me how many days were entered for a month. I thought a pivot table would work well but the same date could be entered many times and that would skew the number of days counted. The final result is a table that had each month with the number of days entered. Keep in mind that I only want each day counted once even though it may have been entered 5 times.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have a column of cells with data like the following
07-Dec-09
08-Dec-09
09-Dec-09
10-Dec-09
11-Dec-09
Blank
09-Dec-09
I need a way in VB to say tell me the amount of dates that are less than todays (09-Dec-09) date. Using the above list the answer should be 2. Every formula I try returns the value 0.
I need to do is, on sheet 2 is to have a formula which will count all cells in column A containing dates from 1/1/2009 to 31/1/2009, Another column will count all dates from 1/2/2009 to 28/2/2009 and so on. I have tried the countif format but this does not seem to work.
View 4 Replies View RelatedOn A3: D10 I have information on C1 a have date and E3:E10 I will input date
i.e. If the date entered in E3 is the same as or larger than the date on C1 then Blank the entire line A3: D3
I need to count cells withdates in theme in a column. So that would be a CountA function; but only if the values in the cells are within a certain date range, a COUNTIF function. Here's what I thought:
=COUNTIF('All Employees'!O1351:O1364,">12/31/05,<2/1/06")
It returns a zero, which I know is not correct, as I checked it on a smaller sample....
I have an excel sheet which is currently 1,100 lines long and expected to increase and has a number of dates in columns W-AO representing the dates in which someone has had an onsite assessment. I wish to report in column AQ if there has been any visit activity in the month, i.e August for this month’s report. Is there an Excel function which will allow for this? Im thinking something like having a drop down list to select the month at the top of the column and then the sheet returns a value of 1 for all lines where a there is a date equal to the month selected?
I guess it is also worth mentioning that the sheet is setup as a table.
I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
I have a column filled dates in the format 01 January 2013 and I want a formula to count all the cells containing "January" for example.
View 3 Replies View RelatedI have a table of numbers with conditional formating, formula's are...
=COUNTIF(OFFSET($W3:$AB3,1,0),W3+1)+COUNTIF(OFFSET($W3:$AB3,1,0),W3-1) - color, lemon.
=COUNTIF(OFFSET($W3:$AB3,-1,0),W3+1)+COUNTIF(OFFSET($W3:$AB3,-1,0),W3-1) - color, light blue.
Column AC, I want to count the number of cells that are lemon for each row.
Column AD, I want to count the number of cells that are light blue for each row.
Is it possible?
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
conditional formatting.xlsx
I would like a formula which will look at a range of cells, for instance a2:g2 and count how many of the cells contents are the same. The cells contain a combination of text and numbers.
View 9 Replies View RelatedIs there away to count cells with 1 or more different fill colors in a column?
View 9 Replies View Related