I have a spreadsheet with over 15 columns showing drivers (names numbers etc) and their duties with more inf.
What I need is to be able to find when a certain type of driver in column A (drivers belong to different rutes) say from route A is at rest (this is shown as RD) which is shown in column B and then be able to count how many times those two exact events occur.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
If I have two columns of data, and I want to count the numbers of times a certain letter appears in column A and another certain value appears in column B, I use the following formula:
=sumproduct((AA="yes")*(BB:="X"))
What formula would I use to count the number of times "yes" appears in column A, AND EITHER "X", "Y", or "Z" appear in column B?
Would this still be a SUMPRODUCT formula, or would a cOUNTIF formula be used?
How about counting the times certain letters appear in THREE columns?
I am sure that most of you will probable know what i am doing wrong here straight away so rather than me waste another 1/2 hr stuffing around. I am trying to find count the number of times two events occur simultaneously.
=SUMPRODUCT(--('5. Financial'!AX4:AX134=A5)*('5. Financial'!BQ4:BQ134>0<0.1))
The first part is fine I think but in the second part I am trying times only when cell is between zero & 10%.
I have a long column of 9-digit numbers which represent the swipe-card-ID's of patrons accessing a parking facility. Most of them occur more than once, some of them many times. There is an operational rule that bars them from using the facility more than x times. (I can't implement this limitation in the parking software/hardware, or I would happily do so.)
So my question is, is there a way to process through that column, identifying each unique ID, and reporting any that occur more than x times?
I will say exactly what i want.
I want to keep statistics of roulette.
More specifically, i want to count how many times a dozen lates to come.
The range from 1-12 is 1st dozen, from 13-24 is the 2nd and 25-36 is the 3rd.
I want to count among these numbers, how many times one of three dozens appear every 1 time, how many times appears every 2 times, .... until 20 times.
For example: I have put in a column 500 numbers from 0 to 36.
The output must be like this:
1st Dozen: Every 1 time: x
Every 2 times: n
Every 20 times: m
The same for 2nd and 3rd dozen.
If I have 1,000 entries in a column is there an easy way to determine the number of times a certain item is in the columns. For example if field A1 is "qwerty" I wan to see how many times "qwerty" or field A1 appears in the entire column?
View 2 Replies View RelatedEssentially what I want to automate is a check through one list on the Sheets("Notes") in column A, with another column B on Sheets(template). If there is a match I want to insert a part of the row that the match occurred on Sheet("Notes"), and insert it above the row where the match occurred on Sheets(template).
Here is my code so far, currently I keep getting a "Application-defined or object defined error" on the line
VB:
Sheets("Notes").Range(Cells(i, 2), Cells(i, 11)).Copy
VB:
Sub add_notes(template As String)
Dim Rng As Range
Dim i As Integer
[Code].....
I have tried lots of alternative for making Excel Dates & Times calculation work in vba. I can't find the place its creating problem. I have attached spreadsheet to have better look at it. When I am using time in one column (Calender!C) in VBA code, it works fine and update values in R1,R2... columns. But, when I am using time in another column (Calender!D), its not working properly and not updating appropriate columns. I will appreciate if someone can look at vba code in attached file. It looks like I am missing some kind of setting in excel/vba.
View 3 Replies View RelatedI want to execute the following code once for each day (Mon to Sun)
Dim Day As String
Dim DeletedDept As String
Set StartRange = Cells(Range("Cashiers").Row + 1, Range(Day & "_Date").Column + 1)
Set EndRange = Cells(Range("Cashier_Totals").Row - 1, Range(Day & "_Date").Column + 3)
Set EntryRange = Range(StartRange, EndRange)
For Each cl In EntryRange
If cl.Value = DeletedDept Then cl.Value = ""
Next
I am trying to create a count based on two variables - site status and activation date - for an output of "# of sites activated this month." Column C is "Site Status" and Column D is "Activation Date." My current formula...
{=COUNT(IF(MONTH($D$16:$D$999)=MONTH('Study Summary'!$E$17), 1))}
...is "working" but is only accounting for one variable and so it is also counting sites that have been deactivated this month. I'm struggling to get the current month, driven by 'Study Summary!$E$17, inserted into a formula.
I'm trying to count a range but I have multiple criteria which I would like to use, I have attempted to use countif/sumproduct with no avail. The data is spread over two columns, one contains the rank of various employees and the other is the number of hours they have worked. I am trying to count how many employees fall in to set hour ranges.
View 2 Replies View Relatedin cell F5 I would like to know how to count the times between 13:00 am and 14:00 so if theres 3 times it will show a 3 i havnt got a clue what formula to use.
View 14 Replies View RelatedI need to create a formula that counts the amount I times I enter a value. For example if I put 1 in A1 then B1 will = 1. If I do this 15 times (putting 1 in A1) B1 Will = 15. If I put a 2 in A1 then C1 will = 1. If I enter a 2 in A1 15 times then C1 will =15.
View 9 Replies View RelatedBasicly we pay single rate between 8.00am and 8.00pm at all other times and on bank holidays and weekdays we pay an enhanced rate. If I can calculate the standard hours then the remainder of the hours are enhanced. Aim to count how many work hours fall between a standard start time (SHS) and a standard end time (SHE) (currently 8.00am and 8.00pm), that do not fall on a weekend and are not a bank holiday.
Column B = Start time (eg 06:00)
Column C - End time (eg 22:00)
Column D= date (from which day of week is derived)
Column E = Y or N for whether it is a bank holiday or not..............
I have a user form that opens when you pick (team1) sheet, I made a chart after week 8.
is there anyway using the combobox's to do a count on who was who's partner? so at the end of the league I know which 2 played together the most?
In the same period of time I have two countings of different stopped time.
sheetA
range (A3:A23), = product code.
range (H3:H23), = time used.
with this formula I take the time used for each product. "= SUMIF($A$3:$A$23,M2,$H$3:$H$23)"
sheetB
On this one I record all different lost times in the same period of time.
What I want is:
Take out from the result obtained with the above formula, the time down from SheetB.
Ex:if I used on sheetA between 7:00 and 18:00, 4:10 of the product A, I want to take to this value the downtime in the same period from sheetB.
Is there a way to select a table and have excel produce a list ranking the #
of times each item shows up in the list, i.e.
dog 5
cat 2
bird 1
?
I have a workbook setup as Read only for reporting purposes. I would like to capture the number of times and if possible, the users that are opening the file....is there a way?
View 9 Replies View RelatedI have a big list of names of people that have completed a bunch of training they have completed. I want to be able to run a pivot table/chart and only count a user once vice each time they have completed a training. So in otherwords I want to get a count of how many people are on the list vice how many certifications they have.
View 1 Replies View RelatedRight now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
the number of days when there were 0 cases
the number of days there was 1 case
the number of days when there were 2 cases.
As yet there are no days in which there were more than 2 cases but there might be in the future.
I have a list of dates when operations took place in that room. On some days the it was not in use, so those dates don't appear in the list. Some days there was 1 case, so that date appears once in the list. On some days there were two cases, so that date appears twice in the list.
What I've done so far is create a pivot table that contains all the dates, then grouped it by day and counted the number of times there was 1 or 2 cases in a day by hand, then subtracted the total to get the days when there weren't any cases.
I have a table with two columns.
PartNumLoaction
CCN01905J6
CCN01905J100
CCN01905J200
CCN01905J300
CCN01905J400
CCN04455J800
CCN05363J3
CCP01960C1
CCP01960C3
I would like to create another table (in a new sheet) which displays the number of times each PartNum appears in the first table.
PartNumQTY
CCN019055
CCN044551
CCN053631
CCP019602
The amount of rows in a table is variable and can reach thousands of rows.
I have a 2007 Excel spreadsheet (saved as .XLS) with worker names in column A and error types in column B. Column B can have multiple entries (which are sometimes duplicative of each other) separated by a hard return.
What I need to do is run tallies to determine the number of errors by type for each person, counting the value every time it appears, even if it is more than once in a particular cell. The ultimate goal is to generate a formula to track the number of occurrences for all error types types for the person in Column A (i.e. one formula each to track ABC's Procedural errors, ABC's Technical errors, ABC's Admin errors, DEF's Procedural, etc) though ideally I just need a formula to calculate any one of those and I can edit it to get the rest. Here's a sample screenshot:
The COUNTIFS formula is where I started but that only seems to count cells with the value as opposed to occurrences of the value. I did find this formula in my searches but it doesn't seem to work:
=SUM(LEN(B1:B100)-LEN(SUBSTITUTE(B1:B100),"Procedural","")))/LEN("Procedural")
I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.
For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View RelatedI am working on a survey analysis and I'm having trouble comparing two columns.
Ex. 100 surveys
Column A being age (scale of 1-5)
Column B being willingness to pay (scale 1-5)
I am trying to correlate age with willingness to pay by saying =countif(a1:100 = "1" and (B1:B100 = "1" and "2"))
Basically checking to see if the 1st age group has a strong willingness to pay; I would repeat with B1:B100 = "4" and "5".
I have a problem, I have a formula which counts the number of instances that occur and assigns the value as 1 for every instance, however I want the formual to also recognise that if a number of instances occur in succession a value of 1 should also be assigned.
E.g. if a person is absent for 1 day the formula assigns a value of 1
if a person is off for 3 days in succession the formula assigns a value of 1