I have a ListObject table called Table1, and the column name is Table1[Company]. The records have been sorted A-Z for the Company.
The records look something like this
Date Employee Company ------------------------------------------- 1/1/11 Jane A Company 1/1/11 Jane B Company 3/1/11 Bob B Company 2/1/11 Bob B Company 4/1/11 Bob B Company 5/1/11 Bob C Company
What I need is a sub() to look in the column of Table1[Company] and determine:
The # of records that match the criteria given the Company name, and where they start and end. Ultimately, I'd like to copy and paste this portion of the table to another spreadsheet.
So for instance, if the Company = "B Company", then I could find out there are 4 records and there locations to copy and paste them.
I am setting up a template to use to track candidates throughout their lifecycle. I am also creating a 'summary report' on another worksheet that counts total number of candidates, counts the number of candidates that have been submitted to the client, count of the number of candidates that have been interviewed by the client, etc.
How do I count the number of candidates in the spreadsheet?
In Cells A6:B5, I have "Submitted" In Cells A7-?? I have dates for those candidates that have been submitted. Then a new section titled, "In Process" A list of candidates are contained within that section. Then a new section titled, "For Review" etc.
There are multiple sections, so the date in Column A1 may not always be in a constant row, as it depends on how many candidates are within a certain 'phase'.
I have a column I5, titled "Status" This column has a built in drop-down list that contains pre-defined status, for example, "Submitted", "Candidate Declined", "2nd Message Sent", etc. I need to be able to create a summary report based on a count of candidates that fit certain 'Statuses'. For example, count the number of candidates that were Interviewed. This could be a combination of Statuses: Phone screen with client, 1st F2F, 2nd F2F, etc.
(At home, I am using Excel 2003. At work, I am using Excel 2007. So if it's easier to create in Excel 2007, that's fine.)
I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).
Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.
I have 2 worksheets with data. One of them is a bench mark template or expected times to complete devices based on batch size and product. The other worksheet is a report generated that shows the actual time techs worked on batches of equipment by product type. I am trying to automate a report that I will need to run every week. I have most of it automated but need some calculations. I want to calculated the expected time to complete the work, based on the data provided in the benchmark worksheet.
I do not want to use an average, and I want to use the expected time of completion based on batch size and product relative to the tech report. Column T is highlighted and where I want this formula to be entered. So if the Total Batch items is 1, then the expected calculation uses that time relative to the product and then multiplies that number to the batch size. Or if the batch size is 3, then it uses the time relative to a batch size of 3 and then multiplies that number by the batch size on the tech report and is entered in the highlighted column.
I have attached the workbook I am working with : Production Report.xlsx
Our reservation system exports a spreasheet daily which contains hundreds of records relating to bookings. The worksheet has an ID column which is not unique, but is sorted alphabetically. I need to write some code to delete all records below the first 'set' of records relating to the first ID value found. i.e. i want to end up with only the set of records relating to the first ID found. So the basic logic would be to look at the value of the field in the ID column of the first record and then iterate down the rows until it came to a different value and then delete all rows below that. Its simple in concept, but im stuck on how to write this.
I have a workbook with many, many worksheets. On each worksheet there is a column called "Cost Code". I need a Macro to locate all like "Cost Code" values and extract data from several cells along that row. Macro would then tally the values from all those like cells on numerous worksheets and place sum on a seperate worksheet in the same workbook, on a "Totals" worksheet page.
For instance -The "Cost Code" value Macro to look for is 1000. This value is located on several worksheets. For every instance of "Cost Code" 1000 Macro is to find value of "Material Costs" in that row (always column M) and value of "Labor Hours" in that row (always column P). Macro would tally all "Material Costs" for "Cost Code" 1000 and put that sum on a "Totals" worksheet page in a specified cell. Macro would do the same for all "Labor Hours" for "Cost Code" 1000.
I have spent a good amount of time trying to create the below using botched IF functions, SUMIFS, SUMIF formulas etc.
Basically I have a sheet (called Sheet1) with the following columns: A - Date (by individual day DD/MM/YYYY) B - A catagory (so using the old example, Apples, Orange, Pears) C - Price.
I would like to be able to create a formula, whereby I can sum the Total sales for each catagory across each month onto a summary sheet (sheet2).
I would use pivot tables, however am not sure how i can make all the require data appear permanently in the best way, especially if there is a one liner that can be done more easily. So far I have managed to create a sum dependent on month, but have been unable to encorporate the catagory.
I have a spreadsheet that lists dates in row 6, columns V through BE. We use these dates to log attendance for kids, so under each date there may be one of many symbols, such as "x" if the student was there. I would like to create a list of the dates that meet one of two criteria: either blank or containing "WR". So, let's say column Z is blank and Y has "WR" in it. In column FB I would like a list of all of the dates that were blank or WR, so I would want the dates contained in row 6 for Y and Z. Is there a function that will 1) look for a blank or WR across a row, 2) find the associated date for that blank in row 6, and 3) write the in another column in the form of a list, each date separated by commas? Here is an example of my information. I would like for a function to automatically make the list in column FB for any dates that are blank or contain "WR".
Most details are shown in the spreadsheet below. I would like it to be dynamic because the quarterly and annual data dumps I'm working with are are hundreds to thousands of lines.
Have the list be sorted, which is a part of the first attempt, would be nice but is not necessary. At this point, just being able to generate the dynamic list would be fantastic.
Excel 2007ABCDE1product lines:consist of these product subtypes2Widget series:Widget.type1Widget.type23Fidget series:Fidget.type4Gidget series:Gidget.type1Gidget.type2Gidget.type356data dump of parts sold or used in repairs7product subtype repairedpart number
Basically what I want to do is take any value that isnt "0" in column F and place it in another column in a nicely formatted table. So basically get rid of all the zeros...
Im sure this has been done and asked before but I have no idea what to search for or if there is some easy forumla in excel for situations like this.
I have three worksheets called North, East and South. Data is held in each of these sheets starting in D1:BZ144 and the data is in columns of three. Example columns D:E is one set of records, F:H is another and so on. The first cell of each set of columns is the company name.
I need to copy all of these records into a Summary works sheet so that the records are in held in columns B:D and that the first cell is shown shown in column 'A'.
Secondly, in a second sheet I'm trying to setup a lookup so that I can call the company name and the records from the sheets North, East and South are shown that relate. I've tried using HLOOKUP but as the company name only appears in the first column I cannot get columns rwo and three to show.
I have a spreadsheet with multiple columns and rows of data. I want to be able to type in a criteria and all the rows containing the criteria are called up. For example Col A Col B Col C Row 1 Apple Fruit 12 Row 2 Banana Fruit 15 Row 3 Carrot Veg 13
I want to have a cell on another sheet in which I can place a criteria, eg Fruit, and then the entire row 1 and 2 are displayed on the second spreadsheet.
I have sales rep data with column headings as Sales Rep, Sales Date, Sales Item Code and Customer ID. There are only 2 sales reps in the data, I'll call them Rep A and Rep B. I need to extract rows where Rep A and Rep B have made sales on the same day to the same customer (it doesn't matter what type of sales). I don't want to extract sales by only one rep, it must be both reps on the same day to the same customer. I have tried a pivot table but it identifies all sales. Can this be done?
As the title says, I need to count the number of unique records (names) in column A, where column L is = to something specific (X,Y,Z,W, whatever) for some statistics im trying to report.
Please see the attached spreadsheet. For role X statistics, I need a count of the unique names from col A, where col L = X. Based on my sample spreadsheet, the number should be 2. For Role Y, it should be 3.
There is the potential for spaces in the rows, and no one will be 'cross role'
I've got a few different methods to just count unique values with specific criteria in the same column, but I just can't make anything work for specific criteria in another column.
I have a folder which has 200 files. I have extracted data from these files based on autofilter criteria. But there are many duplicate records extracted for the criteria. I need only unique records . Below are the codes. Where to I add the criteria for search records:
Sub ExampleSearch() 'Note: This example use the function LastRow Dim basebook As Workbook Dim mybook As Workbook Dim rng As Range Dim rnum As Long Dim mnum As Range Dim FNames As String Dim MyPath As String Dim SaveDriveDir As String
i am trying to create an easy to use search by macro VBA in excel.
I have a sheet of information where i need to find the data records from either one of the 2 search criterias: Name and NRIC.
Once a user enter either of this 2 search criterias, i need a macro to search through the data on Sheet "List" and return the results on the Sheet "Search".
Within the list, a search criteria may appear more than once, the search results should display all of the records row by row on Sheet "Search".
I am trying to use an advanced filter to extract records that meet the criteria in the blue input cells. I can't get the criteria correct to allow me to meet the 3 conditions. There are duplicate names in the list so I will need to use unique records only option....
2.) ... Column H <>"" and Column I <>"expired" and <>"" and Column I >=A1 and <=A2
3.) ... Column H <>"" and Column I ="expired" and Column H+120 >=A1 and <=A2
4.) ... Column H <>"" and Column I >=A1 and <=A2 and Column J =""
A1 - user defined (start) Date 1 A2 - user defined (end) Date 2 Column B - 6 digit number (or blank) Column H - Date 3 (or blank) Column I - Date 4 (or "expired" or blank) Column J - Date 5 (or blank)
I am trying to have a piece of code go through all the records in this list, if any of the dates are within the next 2 weeks (from now()) then copy this record (name, date) and put in sheet2. And loop through all 300 records or possibly additional records.
Hi, have a question regarding dynamic charts, specifically I am trying to create several dymanic charts based on data in a single column (So i can only say my first set of data will be starting a a set location in the chart, the rest has to shift down based chart data above it). This data should organized in charts depending on the data in several other columns. For instance, need to pull out values from column based some ID and some PartNumber. A sample excel or VBA would be much appreciated. I know VBA but do not know Excel VBA much.
I have a spreadsheet titled "PMIX" In Columns A:F Column F has Week Ending date. Each week, I need to update this, i.e. delete the data from two weeks ago and then add the new weeks data. What I am thinking is I enter a Week Ending Date in H1, then I would like VBA to delete all rows where it has the data in H1. I am hoping for a delete function as opposed to a clear so I can shift all the rows up.
I have an excel file that gets records from access database. I have a field named "Class" in column C which starts at row 4. I want to filter the records in such a way that only those records with Class equal to whatever value I put in cell B2 will be shown.
For example:
A B C REPORT Filter Class: _______ ProjID Name Class 001 Project A 4 002 Project B 4 003 Project C 4 004 Project D 8............
I have a very large table that has a one to multiple relationship in a GIS. GIS doesnt support that type of relation ship. I need to find records that are related to the single key but have different values than the first record for that key.
eg
Col 1 col 2 Col 3(key) ab ab 1 bc bc 1
In this example, only the first row (ab) will be regarded in the GIS. so I need to pull out the second row and put it into another dbf based on the three columns so that I can then put it into the GIS so that the second row is considered and not ignored.
Book1 and Book2 are workbooks that I have modified in order to protect private information.
Book1 will have 11,000 records (my example Book1 has only 100). I need to rearrange Book1 such that it looks like Book2. Book2 has 20 complete records from Book1 combined into one single row, and my example Book2 has populated 3 rows only (3 rows x 20 records, making 60 records now appear on 3 rows only).
Macro for getting Book1 to Book2? 11,000 records in Book1 will take a lot of hours to transform into Book2 unless a macro can do the job for me.
I have created a database at work which collates various information on the sale of products. Part of this information is the date that each particular product is up for review (In DD,MM,YYY) format. Using the internal clock function I have produced a formula that calculates the numeber of days until expiry.
However, using this information I want to be able to run a macro that looks at accounts that have for instance 5 days left until expiary and populate a new worksheet with various information extracted from my 'main' database. For example, search all the porducts that are due to expire tomorrow and then populate my new workseet with data from cells such as
I have a single excel data sheet with 10 rows of header information and then multiple rows and columns of data
I need to extract the 10 rows of header data plus the rows for each unique record in Col A into its own separate worksheet, with the work sheet name being the unique record from Col A
To further add to the challenge, the data in col A may have "/" in so will not comply with excel sheet naming convention so would like an error message to remind me to manually change a sheet name.
I attach an dummy data sheet just to show what I mean!
