Every day i create a attendence sheet with names, who was attening a club the last 21 days.
I need some kind of report showing who is in Sheet1(Today) and not in Sheet2(Yesterday)="new people" and who is in Sheet2 but not in Sheet1 (people that stoped attending, droped out the list).
I tryed with "countif" and "Vlookup" but have to change the formulars on two sheets every day and i would rather like to leave leave the Sheets untouched.
find the attached Example file. I need to create a report either by using or without using VBA.
View 3 Replies View RelatedI've three columns excelsheet and want to create Per day report.
Date,Records,Status
I want to count per day records and status.
This will be self-explanatory when you check this screenshot
As it is now I use several loops to scan one sheet to collect the data and paste it onto a second sheet. The first sheet has several rows of data, denoted by one of four colors, that I have to collect and put into a report grouped by color. Each color represents the current status of a part of a project. The while loops stop on no data in column one. So each loop runs down the sheet, looks at the data row color and rejects it if it is not the right color for that section of the report. I am sure there is a better way to do this. I was thinking maybe create a temporary data base, collect the data adding fields for the current status then use a sql for each section of the report and insert rows as required.
While Worksheets("All Work"). Cells(iGetRow, 1).Value <> Empty
Set Cell1 = Cells(iGetRow, iGetCol)
Set Cell2 = Cells(iGetRow, iGetCol + 4)
Set rCurrent = Range(Cell1, Cell2)
rCurrent.Select
With Selection.Copy
If rCurrent.Interior.Color = Purple Then 'Purple is a constant
Worksheets("Report").Paste Destination:=Worksheets("Report").Cells(iPutRow, 1)
iPutRow = iPutRow + 1
End If
iGetRow = iGetRow + 1
End With
Wend
Data Structure:.............
Rep NameCall StartedDuration h:mm:ssRep 12:19:18 PM0:00:36Rep 13:09:01 PM0:00:56Rep 13:11:01 PM0:01:05Rep 13:12:12 PM0:01:13Rep 13:26:26 PM0:00:39Rep 27:08:35 AM0:01:57Rep 27:16:32 AM0:02:12Rep 21:47:17 PM0:02:01Rep 37:05:01 AM0:10:37Rep 37:36:24 AM0:00:16Rep 311:41:43 AM0:15:21Rep 312:47:36 PM0:00:46Rep 31:45:36 PM0:02:19Rep 31:49:54 PM0:00:32Rep 31:51:46 PM0:00:56Rep 31:55:03 PM0:00:35Rep 31:59:26 PM0:00:22Rep 47:04:24 AM0:00:16Rep 42:40:41 PM0:00:08Rep 43:06:22 PM0:02:16Rep 43:21:35 PM0:00:04Rep 43:21:49 PM0:03:05
which is the time that any rep started a call and the duration of each call
and i need to make a graph from it that kind of looks like this:
(not actual data)
this way you can clearly see that for the most part rep 3 was the most productive however only rep 2 was on a call after 2pm.
i need this report to see tendencies on how much time is wasted on meetings and such keeping the reps off the phone.
I want to create a report from an existing excel spreadsheet that will show the first row with column headings. I only want certain columns from the spreadsheet to show on the report (see attached). On the left (1st column), I want to show the data from each of the last 7 days. Then I want to show data for rolling last year to date, then for last rolling year to date, and finally for last rolling 30 days.
View 2 Replies View RelatedI have this form (Invoice) on a spreadsheet and I want the footer (Taxes and Total) to appear only at the bottom of the page or of the last page, if many. I call this a "Report Footer" because no matter how many pages the invoice might have, this section will be pushed to the bottom of the last page.
I need to ask because we all know that we cannot program formulas in the actual Excel spreadsheet footer!!Facture-Logicim.xlsx
I use a specific report on a daily basis which is attached here. Is it possible that that report is generated automatically in the same sequence of rows once the data is updated in another sheet. I am not good in VBA so looking some built in function. I have tried the pivot but all the formatting and design of the report is changed. use the Template wizard with data tracking is used is the above exercise is possible. Is there any other better methord is available in excel. Is there any good web site availble to learn these things.
View 2 Replies View RelatedI have 4000 activities in the rows; I want to know if there are changes occur (e.g. duration, dates, quantities & etc.).
I would like to compare the two sheets with the same Columns and Identifiers, Say sheet1 and Sheet2 and I want the result to be in Sheet3. Sheet1 is the target & Sheet2 is the current changes.
Is it possible? What will be my code?
I’m trying to figure out how to compare two different versions of a sheet with each other and to identify which lines has changed. Here is a simplified example:
>Microsoft Excel - post data.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutE4J4E5J5E6J6E7J7=BCDEFGHIJ3V1CONCATENATE V2Change check4123123 1012 No Change5456456 465Changed6789789 8 9Changed710 121012 123No ChangeSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
When using this formula I get an error in cell J12 that reports a no change even though the values has changed. The error occurs due to the blank cell found in cell C7 but I can’t seem to find a way around the problem? (except for adding an if(cell=””;0;cell) before every cell which isn’t really practical in my actual data)
Furthermore my actual data has more the 10.000 lines and +30 columns so if the formula I use for change tracking can be done easier in any other way I would be happy to get some help? Maybe I should even consider a macro?
I need to create a summary report on another sheet, but it is beyond my capacity.
View 9 Replies View RelatedI have attached the worksheet.
As you can see its just a Job logging spreadsheet, What I am trying to do is create a jobs out standing log that will probably go in place of the Search Results sheet.
I have a job Info sheet that is just for new jobs and a Jobs Done sheet that is for jobs done, in the Search Results sheet I would like to have Jobs Outstanding, this would be done by matching the Job Number in the Job Info & Jobs Done Info sheets and giving me a report on all outstanding Jobs. I would also like to add a Jobs Outstanding Button to the Intro Sheet.
I need to create a report based on three columns. I have explained in detail about my requirement in the attached sample workbook.
I hope someone will help me to solve the problem through VBA because the items & expenses may vary at times. Hence, I feel a Macro will be the best solution.
I need to create a Report on a Daily Basis and there are certain things which I need to check to ascertain whether the report is accurate..
These checks are done on several sheets which confirm the report is accurate like the Total Count of Employees should be equal to the COunt of Zonal heads and the Cluster Managers in one of the Sheets..
So, without going in each sheet to do the same is it possible to achieve the same using a Macro..
Like some MsgBox which pops up when I click on a Command button "Check"..
Then If I get an Intel in a msgBox then I can go in that sheet to check or take some action or else just exit sub..
If u dont mind can i have example xls file please.
i hope u guys will help me to improve my knowledge by uploading attachments ...
Not sure if this should be in VBA or Formulas however what im trying to achieve:
I have a data report that i pull today, tomorrow i want to run the same report and see if there are any differences on the report. e.g show data that was not on the previous report.
Id imagine id have a sheet with yesterdays data, sheet with todays data, sheet with Differences that only shows the new lines between the report. Then after i have done i would just create a macro clear the difference sheet so its blank, copy todays data over to yesterdays data and repeat the process daily.
I'm trying to compare cells in 2 sheets, and if those cells are equal, I want to select the whole row that the cell is in, and copy it into a third sheet.
[Code]....
I have two excel sheets (sheet1 and Sheet2) see attached file.
On sheet1 I have the data that I want to compare to sheet2.
I want to go through each row on Column A on sheet1 and compare it to sheet2.
For example on sheet 1 Column A, Row 6 has value of 5, when i compare this value with sheet2. it will not found. I want to highlight this value as Red.
In the column marked SA I have some numbers. These are Sub-Accounts. I am looking to run off a report that prints off all rows with the respective SA number. I have only included a "4" and a "5" in my example but there is going to be more than one row "assigned" to Sub Account 4, Sub Account 5 etc. Ultimately it provides a break down of the accounts.
View 7 Replies View RelatedI need to create report (just summing up) based on values in two different columns. I need a VBA to do it as the column values may vary at any time.
I have attached a sample workbook for your kind reference.
I do backups on a daily schedule. Given the spreadsheet called "A" which is a list of all clients and current backup policy as of last week, and the file "B" which is a snapshot list of servers in our supported environment, does someone have a clever way to determine which systems are in "B" that are not in "A"? The clients are listed in column M in spreadsheet A and this column may have multiple client names listed due to a policy that includes multiple clients in the netbackup schedule.
View 4 Replies View RelatedIs it possible to use multiple Vlookups in one macro?
Currently running a vlookup of computer names between multiple sheets, i need to be able to match product name and computer name between sheets.
For example (Sheet 2 column B) compare it to (sheet1 column B and C)
if it gets a match then vlookup to (sheet 2 column A) to (sheet 1 column A)
Spreadsheet attached : excelhelp.xls‎
I would like to compare column b of sheet 2 to column b of sheet 1.
If the entry exists in both sheets then i would like to delete the entire row in sheet 2.
I developed some pivot table reports and macro'd out pdf'ing them for the users but now management want the users to be able to manipulate the data themselves !! The file is 31 sheets and I'm figuring they'll only want to see the sheets that are relevant to them so is there a way to macro it out?? Perhaps when the file opens it asks, "Who do you want to see?" Jack? Joe? or Rudy?, Month or YTD, or Both? or Everything? and it will hide the sheets that are not selected. The words "month" and "YTD" is in Cell "N1" and the individuals names are in Cell "M1".
View 6 Replies View RelatedI have a workbook with many sheets, basically all the sheets are almost the same template with fill-in information for different type of jobs, and for the most part, the information is located in the same areas in each sheet.
I need to look in each sheet for a cell labeled, Committee ID:
And then copy it and the cell to the right of it, so for example:
A8 hasCommittee ID:
B8 hasC1234N
So, loop through all the sheets and get these values and then paste them into a new sheet in the same workbook and call that sheet Report. When pasting data into the Report sheet, insert a space between each result.
I have a project that is quickly growing out of control.
I workbook made up of 14 worksheets. Oct - Sep, Summary and main.
I have been entering all my data in main, which is A - AB. Various types of data, dates, dollars, names, etc. I have been trying to sort the 'main' worksheet into the separate months based on a date in column B.
For example if the date in column B is 1 Aug, I would like the entire row copied to Aug 07 worksheet. Then in Aug 07 worksheet is the formulas to calculate the data needed for Summary page.
Pretty simple, except I cannot get it to do that. I have tried to pivot, auto sort, and a few various VBAs to no avail. One of my Googles turned up this site and many pointers have been found and are close, but most are focused on combining. The workbook is a tad over 1mb so I did not post it yet, but can if needed.
I am in the exploratory stages of determining whether I can create a report in Excel 2007 to add the instances of a particular entry in a column. It is tricky, because I want to survey only the first 4 entry rows of a group of 8 entries and then return the result as only one instance of the entry over each of a set number of these sets of data rows, in each case 4 sets. This process would repeat down the spreadsheet, and the number of occurrences of each particular entry summed and reported in a separate tab of the same spreadsheet.
The rows in this spreadsheet are 17-1240. The entry names are a combination of two columns, J and K. These must match identically for the counter to count an additional entry.
I would prefer to make the report in a different tab in the same spreadsheet...just available for reference.
Let's say I have a list of 200 customers with their business name in column A and their total 2011 purchases from my company.
How can I create a report to show the TOP 20% based on sales to grand total.
Basically, of my total business last year... I want to see the top 20% of this customer list that contributed to my total business.... and so on... to show top 40%, top 60%, etc. So, did 5 customers contribute to 20% of my total... or was it 10, 15?
Let's start with the above 1st.... but I want to also know if I can make this report (or maybe dashboard) dynamic? I'm pulling my sales from a database, and want to be able to refresh this report periodically throughout 2012. The list of customer will grow throughout the year too.
I've two sheets containing Incoming and Outgoing data. On the Outgoing Sheet, the Reply ref. shows the corresponding Incoming document replied for. I want to have the Reply Document ref. on the Incoming sheet corresponding to the document replied.
View 4 Replies View RelatedI need to compare the 2 sheets with respect to a unique key. Once the unique key matches , I need to compare 5 other columns of the two excel sheet.
Note : There could be missing rows in either of the excel , so its necessary that we look up 2nd sheet completely to find the unique key.
For Example : In sheet 1 : The unique key is preent in column B and in Sheet 2: The unique key is present in column I. Once we locate the rows in both the sheets with the unque key matching, we would need to comapre , columns A, C, E AND F of the sheet 1 with columns A,B,C AND D of sheet 2.
We need to report if all the data matches when the unique key is same.