Count Same Number In Three Ranges

Nov 19, 2002

Need a formula that will count the number of occurrences of that same number in three different ranges. The number that is to be compared to is in a cell that is a result of a formula.

Example:
Lowest number found in three ranges: 30 (Answer is in A1)
Question: how many times does that number appear in the three ranges?

Syntax:
=Countif(Range1,range2,range3=A1)
Has to equal the cell reference value (A1), not a plain number (like 30)

View 9 Replies


ADVERTISEMENT

Count Between 2 Number Ranges

Dec 14, 2007

I have many columns of data, each containing numbers ranging from zero to 100. I am trying to determine the formula to count how many of these numbers fall into different defined ranges;

e.g. how many pieces of the data are numbers between 90-99, how many are numbers from 80-89, 70-79, 60-69, etc continuing on down.

I attached a sample workbook which may be clearer: there is a tab (titled "data") with 3 example columns of data & there is a tab (titled "counts") where I hope to get counts for each range to be generated by a formula rather than count them myself.

Not sure if the following is possible, but this would be even faster if each column didn't have to first be sorted ascending/descending for the formula to be effective (as I have hundreds of these columns).

View 3 Replies View Related

Count Number Of Values In Different Ranges?

Aug 2, 2013

a column contains 'amount'. The amount can be from 1-999999. Some cells also contains #N/A (thr' formula) & blank (thr' formula).

I want to get NUMBERS of 'amount' whose value is
1-10000
10001-20000
20001-30000
30001-40000
40001-50000
50001 and above.

View 5 Replies View Related

Count Number Of Date Ranges Include Certain Month?

Oct 30, 2013

I have a a set of date ranges. The start and stop date of the ranges are listed in seperate columns. I need to count how many of those date ranges include a specific month/year. Example data is below.

Start
Stop
Month/Year

[Code].....

View 4 Replies View Related

Count If / Compare 2 Ranges And Count Where Cells In Same Row Differ

Apr 15, 2014

Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.

View 3 Replies View Related

Count Ranges

Nov 20, 2009

Part #1/1/20091/5/20091/6/20091/7/20091/26/20091/27/20091/28/20091/29/20091/30/20092/2/20092/3/20092/4/20092/5/20092/6/20092/9/20092/10/20092/11/20092/12/20092/13/2009ABC --20372027-00013211321-1304-001232122500

I have some data on rows that are similar to what is above. Hyphens mean no activity, then there are "stock" amounts and then "0" means out of stock. I'd like to count the # of times that the stock changes to 0, by ranges...so 1/27/09 - 1/29/09 would be counted once -- as a range...the answer here would be 3 times that stock went to 0 - hyphens ignored..

I'm sure if's some count if function, or multiple ones, but not sure.

View 11 Replies View Related

Count A Text In Different Ranges?

Mar 17, 2014

how to count a specific text in two different ranges eg a text "moby" ....want to count how many times it comes in ranges b4:b20 and in b50:b70

View 3 Replies View Related

Count In Multiple Ranges

Mar 12, 2009

look at the formulas in column cells G28..G33 and tell me where I went wrong.I have attached the file.

View 2 Replies View Related

Sum/Count Bewtween 2 Ranges

Jun 25, 2009

I am trying to figure out how to sum/count between ranges. The attached file has the data. Basically I have the list of salespeople, Various ID's, Units, and sales. I want to count/sum by salesperson between 2 numbers. In the example below, I'd want to know Jones sales between ID's 1 and 3. The attached file.....

View 2 Replies View Related

Count & Sum Ranges From Pivot

Mar 20, 2009

I have a pivot table (sheet1)that has dates along the top(jan to dec 08 and will eventually include 2009) and codes down the left side.

The pivot will change on a daily basis, i.e. more codes will be added, as the new date comes up.

On sheet2 is my basis formula's that count or sum up on a monthly basis but with a fixed range, so if the pivot chnages the formala does not!!

Can someone help me with a formala that is dynamic enough to cope with this, i.e. maybe using the month to help with the calculation?

View 6 Replies View Related

Count The Match Of Two Ranges?

Apr 30, 2009

I have a set of data and I need to count the match of two ranges in a matrix, example:

ColumnA | Column B
Week | Component
1 | AAA
1 | AAA
1 | CCC
1 | DDD
1 | CCC
1 | CCC
1 | AAA
1 | AAA
2 | AAA
2 | BBB
2 | BBB
2 | AAA
2 | CCC

I want a matrix like this:

Week/Component| AAA | BBB | CCC | DDD
1: 4 | 0 | 3 | 1
2: 2 | 2 | 1 | 0
3:
etc

I have 12 components and 104 weeks which means that using DCOUNT doesn't feel like an option.

I would like something like:
FOR RANGE A1:B3000 COUNTIF 1 in column A AND AAA in Column B

View 2 Replies View Related

Count #N/A In Non-contiguous Ranges

Sep 12, 2007

I want to count the number of cells with a “#n/a” in for a cell range which is non-continuous. For example my cell range is: “H5,J5,L5,N5,P5,R5,T5,V5". I’ve tried a few different things but I can’t get the function to work.

View 8 Replies View Related

Evaluate Two Ranges And Count Two Conditions That Met

Feb 27, 2014

I am struggling to come up with a formula that will look at one column of data to check for a condition (for example, it says 7. Implement) and then look at another column to see if a second condition is met (this one is a date ie Feb-14) and count those that meet both. The data I wish to check is on a different worksheet if that makes a difference...

View 1 Replies View Related

Count Equal Words In 2 Ranges

Feb 15, 2008

In my workbook, I want to count how many duplicate words in 2 ranges.

Eg:

Col A are more than 10,000 words and Col B are more than 10,000 words.

I want to count total duplicate words in these 2 ranges.

View 9 Replies View Related

Count 3 Criteria Based On 3 Ranges

Jun 29, 2009

I am attempting to count records based on 3 criteria in 3 different ranges and am hitting a wall. My formula will be on a different worksheet as it is the summary sheet.

Worksheet "Cases"
Column E - Type
Column F - Month
Column G - Year

Worksheet "Recap"
Recap month will be input into Cell I5 eg. "6" for June
Recap year will be input into Cell K5 eg. "2009"
Cells N10-N15 is a list of Types

Summary Cell J10 will need to count if
1)worksheet Cases column E = worksheet Recap N10
2)worksheet Cases column F = worksheet Recap I5
3)worksheet Cases column G = worksheet Recap K5

View 9 Replies View Related

If Count Formula Multiple Ranges

Jan 3, 2007

The formula below contains an error (one of many as I've been trying to resove this). = COUNTA(IF(CZ4:DE4,DI4:DN4,DR4:DW4,EA4:EF4,EJ4:EO4>"1",Games / Activity,Games)) The formula should return the following result:

If two or more cells in the above ranges contain numbers and cell C4 isn't empty then return the words "Games / Activity", otherwise return "Games". If C4 is empty keep blank. Can this be done with a standard formula?

View 2 Replies View Related

Count Dates Between 2 Date Ranges

Jun 11, 2008

I am trying to count the number of instances of dates that occur in a single column. For example, I want to be able to count the total # of dates that occur between Jun and July, then a different count of dates occurring between Aug and Dec (see example below). I have tried this formula: =SUMPRODUCT((E11:E149>=1/8/2008)*(E11:E149<=12/31/2009)) but it comes back with zero.

Column A
---------
1/8/2008
5/8/2008
8/18/2008
9/18/2008

View 2 Replies View Related

Count Number Of Equal Cells With A Prefix In Col D And Insert Count In Col A?

Aug 7, 2013

I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

View 9 Replies View Related

Count If Formula: Count The Number Of Nhew Stores Each Quarter

Aug 21, 2006

going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....

View 6 Replies View Related

Match And Count Unequal Ranges With Conditions

Oct 13, 2009

I have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.

For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).

The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).

For example: .....

View 10 Replies View Related

Count Unique Months Between Date Ranges

Oct 12, 2009

I'm scrambling my head to put this together. Could somebody show me how this is done?
I have two rows of data that contains dates in the mmm-yy format. The first row is the start date of the activity and the second row is the end date of the activity. Thus, in each column i would have an activity with its start and end dates. If i want to total the number of months taking into consideration only unique months (counting over-lapping months just once), how do i do that? These dates could have breaks in between, too. Like if an activity ended Jul-08, the next could begin Dec-08.
I am able to count the months using the datedif function, is there a match or other function that i need to use?

View 9 Replies View Related

Return Count Of Cells Within Column Which Are Between 2 Date Ranges

Jan 16, 2013

I want to work out how many cells in a colums are "equal to or more than AND less than or equal to" certain date ranges.

E.G. Column A has random dates from 01/10/2012 to 31/12/2012. I want to know how many of these cells have dates that meet the criteria of >=01/12/2012 and <=31/12/2012.

I have searched on here and found COUNTIF which didn't work. I also tried DCOUNT which I couldn't get to work.

View 2 Replies View Related

Get Excel To Count Only If Two Logical Statements Fulfilled Using Ranges?

Jul 24, 2013

I am trying to get excel to count a value if (and only if) two logical conditions are fulfilled on two different cell ranges.

1st condition: In cell range x, the value should = C2

2nd condition: In cell range y, the value should be greater than 0

I've tried an AND statement and failed, and I've also tried COUNTIF statemetns and had no more luck. This could well be due to my skill level however.

View 4 Replies View Related

SUM (count) - Multiple Criteria Including Date Ranges

Oct 23, 2009

My setup is - excel 2003 sp3 / windows xp

On one sheet (Data) I have a list of action items, each with owner; target date; classification and in some cases revised target date. I'm trying to report on these fields and provide a status, by owner and classification, of how many are overdue; due this month; due next month; due beyond 2mths.

Using a SUM array formula on another sheet I can count the number that are overdue based on date; owner; classification; and target date, but can't find a solution if there is a revised target date. Any guidance you can give would be greatly received.

=SUM((Data!$L$3:$L$27=D$18)*(Data!$P$3:$P$27=$C23)*(Data!$N$3:$N$27

View 9 Replies View Related

Count If- Formula That Will Count The Number Of Times

Jan 16, 2006

in writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).

On the table listed below I will return the data using a match.

From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed

To this table

A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43

View 11 Replies View Related

OFFSET-COUNT-MATCH Method To Create Dynamic Named Ranges

Dec 25, 2008

I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??

View 3 Replies View Related

Count Number Of Clusters / Groups Of Given Number Occurs In Column

Mar 2, 2012

I have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.

In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.

0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
0
0

View 3 Replies View Related

How To Count Number Of Events A Number Appears In A List

Jul 30, 2012

I want to count the number of times any given number appears either as a consecutive group or singularly.

To give you a context I monitor windturbines and for any given fault code I wish to count the number of events it occurs in a month. Now it could be for 1 hour then clear the next then back for 17 then claer again. That would be 2 events!

NB the data is in seperate coulumns per turbine.

View 7 Replies View Related

Count Cells By Number & Add Adjacent Cell If Number Is X

Jan 19, 2008

Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!

View 6 Replies View Related

Match A Number From Between 2 Ranges

Feb 4, 2009

I have a whole list of numbers (e.g. 7, 23, 567) and I would like to be able to tell which range they fall within and return the category.

MinMaxCategory
1275Group A
276375Group B
376600Group C
601825Group D
8261,075Group E

Therefore 7 and 23 would be Group A, and 567 would be Group C. I can do as a long nested IF, but I'm sure there must be a better way.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved