I have the following:
"ClosQtr" = 8034 (Closqtr is a named range cell)
As a named range cell "Curr_Mth" changes (which can take end of month values from 30Jun08-31Dec09 only),
I would like A2 to be:
ClosQtr+1 "Curr_Mth"=30Jun08
ClosQtr+1 for 30Jun08
I have a list of numbers column A and a list of dates in column b, i need a formula which looks up the most recent for each of the numbers. can this be done?
View 3 Replies View Relatedin which the OP was trying to find the maximum date (Col B) in which the value in Col A occurred, DonkeyOte used this formula as a possible solution
View 4 Replies View Related=MIN(IF(B3:B32="",IF(A3:A32>0,A3:A32))) ArrayedOldest Date Array.xlsx
Following on from a previous post need to add to my (forums) array.
I need to find the location of a date which has been looked up in a cell based on the above formula which is in the attached.
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedI have a table with three columns. I'm building a calendar on a separate worksheet and am looking up the "value" based on a calendar date. So if a date falls within any of the ranges, I'd like to return the value in column C. For example, if the date is 02/07/12, I'd like for the result to be value 1, or if the date is 04/17/12, then I would like the result to be value 3. I've used a nested vlookup, but all that give me is the value when either the start or end dates match, but I can't get a value when the date falls within the range. If the dates were consecutive, I would simply use vlookup/TRUE, but the dates are not consecutive.
ABC102/06/1202/09/12value 1203/12/1203/15/12value 2304/16/1204/19/12value 3405/21/1205/24/12value 4506/25/1206/28/12value 5606/25/1206/28/12value 6
I have 3 Sheets named Paid, Rejected, and Reprocessed.
On the Paid and Rejected sheets I have 2 fields Customer # (Column A), and Amount (Column Q). (The customer # field has many duplicates but the amounts are never duplicates)
On the Reprocessed sheet I have all the rejected items (all fields) and also a field named Reprocessed. I need to use a formula that will check the Paid sheet for any items that have the same Customer # and Amount and return the amount
There are 8,216 rejected items and 45,047 paid items. Some items were originally rejected have been reprocessed and show under paid.
Any thoughts on which formula I should use?
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedI have a list of venues and a start date, end date and number of items per day to be installed, which looks like
A - B - C - D
Venue 1 - 01/01/12 - 31/01/12 - 15
Venue 1 - 03/01/12 - 30/04/12 - 10
Venue 2 - 05/01/12 - 28/02/12 - 9
And I want to summarise this in a table with one row for each day of the year which looks like
A - B - C
1/1/12 - Venue 1 - 15
2/1/12 - Venue 1 - 15
3/1/12 - Venue 1 - 25
4/1/12 - Venue 1 - 25
5/1/12 - Venue 1 - 25
etc etc
I can't work out the formula to put in Column C on my second table which will lookup the venue name and then put in the sum of the daily values.
I need to lookup the newest date that is populated and take the corresponding value for that date for each row. For example member ID m1, needs to go to the newest date and show the value for the newest date that it is populated, so it would show the number 5 in column E for 8/4/13, as that is the newest date that is populated. For member ID m2, I need to show the number 7 that corresponds with the date 8/2/13. Attached is a picture for reference.
Attached image : Capture.PNG‎
From cell I1 i want to lookup the date from A1. Then you can drag across automatically insert each date (D1 and G1) into DATE B (J1) and C cells (K1). ie. insert value copied from each date which is located every 4th cell.
View 8 Replies View RelatedI want to lookup a value with a date in between 2 dates. Only outcome I need is a true or a false (0 or 1 is also ok).
Value
Date from
Date to
[Code]....
Lookup value is a "B" and lookup date (12 March 2014) should be in range. ==> outcome 1
Lookup value is a "B" and lookup date (30 april 2014) should be in range. ==> outcome 0
Know this should be done with index and match function.
I have have been trying to use either vlookup or Match Excel functions in VBA code where the lookup key field is a date. I don't have any problems doing either in the spreadsheet, but both fail in my VBA code. I get an error that the program can't find the "Vlookup [or Match] property of the the worksheetfunction object."
I have a thought that I could try to convert the date to an integer, and do lookup on the integer, but even if it works it seems like an escape from doing things the right way. I can get worksheetfunction.vlookup to work when I am not using a date as the lookup field. Sorry I am not enclosing the code. I have changed it so much trying to find a workable solution that it is not much use now.
there is some thought that worksheetfunction.vlookup and worksheetfunction.match don't work in VBA when the lookup field is a date. Possibly this is just an Excel glitch, but if there is a way to fix, that would really make things easier.
I have got a database wherein it contains the details like Employee Name, Birth Date, Date of Joining, etc in Sheet1. Suppose, Employee AAA birth date is 30/Jul/1980. When on 30th July 2009, it should display the Employee Id in Cell C3.
How should I lookup for the current date & month from the Employee Birth Date?
I'm trying to create a macro that allows a date to be entered into a Dialog box that is activated by a short cut key.
The macro would use this date to look through all the information on tab Output, and if(as) it finds dates that match the information will then be filled out on tab Schedule.
For clarification Work Center would be the abbreviation (letter code) about the dates.
I have a table with dates and currency-rates. There is only one currency rate per month, but the day can be different since the date is the last working day of the month. I want to lookup these rates based on a date where the day can be any day in the month. Any proposals?
Table example:
Date Rate
30.06.2003 7,09320
31.05.2003 6,70466
Lookup date: 20.05.2003
I have created a workbook that contains a summary worksheet as well as a lookup page. On the summary worksheet, I have a cell that states the current balance for a series of investments that are listed by date in the lookup worksheet.
I need to create a formula that references the balance that is listed under the most recent period. For example, I have investment balances from January to May, and I need to have the May balance appear as the current balance, until next period, when the June balance should appear, etc.
I want to lookup an ID which there may be three of, but I would want the most recent date out of the three ID. I can get this to work by putting the column in ascending order but this is not very practical.
Is there any way I can do a lookup and add a date parameter to lookup the most recent?
I have a row of dates, with variable start date, each being one week apart, starting in cell T5 (say T5 = 4/12/06, U5 = 11/12/06, V5 = 18/12/06 etc). The last date is in cell AE5. I wish to loop along the range and find the date that today’s date (say 21/12/06) falls in (answer = 18/12/06). And enter that date in cell Q2.
View 4 Replies View RelatedI have a row of values with empty cells in between and I need to detect the first value(negative) and return the date of this numerical value, which is placed three cells above. It is basically a way to automatically find the date of the first transaction for an IRR calculation. I was thinking of using an HLOOKUP or some kind of a MATCH, INDEX structure but I think you need to match to a particular value there, or am I mistaken.
View 2 Replies View RelatedI'm having serious difficulties with getting together a formula for a little bit complicated lookup.
I have 2 tables. In the first table I have categories in the first column (e.g. red, blue, green), in the second column I have dates (DD.MM.YYYY). And in the third column I would like to get the values from the second table.
In the second table I also have categories in the first column, dates in the second column und values in the third.
I would now like to get the values from the second table that coincide with the categories. And in addition the dates should also be equal to the date in the first table OR the date from the second table should be as close as possible but BEFORE the date in the first table.
Example
Table1
Red 07.08.2005 ???
Table 2
Red 18.04.2005 three
Blue 11.06.2005 one
Red 06.08.2005 four
In this example the value that should be looked up is "four".
I have data that contains all the days in a year G7:I372. I want to lookup a value based on month, date and return the result. The sheet I am using contains a list in A3. As I change the value of A3, i want the dates to update. See attached sheet.
View 5 Replies View RelatedMy vlookup fonction fell in a black hole after the november 23rd 2009.
What would you reckon?
I have a four columns, one with created date, one with proposed date, one with a name and one with a dollar amount, I want a formula that will look at the two columns with dates and report back based on the name, the total dollars of each line where the dates are prior to today.
View 1 Replies View RelatedBasically i have date in col A, Name in col B and Status in col C.
Let say A2 & A3 are both 1 Jan 2014, B2 & B3 are both "exam 1", C2 is "success", c3 is "failed"
Is there any where to add helper column so in row A2 : C2 mark with "blank" and A3:C3 mark with "yes"
So then when i pivot it ..i can add the helper column as criteria and choose "yes".
I attached sample file here [URL] ..
Just click download on that site and you can save or open the data.
I am trying to an If statement but the first part of the IF statement needs to be between a specific date range. Here is the formula I have:
=IF(AND(Sheet1!A4>=1/1/2008,Sheet1!A4
attached worksheet.
The worksheet has two sections, Extra payments and Loan Schedule.
If a date in the Extra Payments section is within a range in Loan Schedule, the enter its corresponding value, or sum of values in the Loan schedule under its respective date.
the attached sheet explains in detail.
On the attached sample file, I used this array formula to lookup fo the
"First purchase date" - {=MIN(IF((Sheet2!A:A=Sheet1!A2),Sheet2!B:B))}
However, for the "Second purchase" and "Third purchase", i'm stuck and can't think on how to return the dates.
I have a bit of code (See below) which basically looks at a list of data in rows 10:99 and then finds a date that is between cells c1 and b1. If there is one the it puts that date in if not it leaves cell blank.
[Code] .....
The problem I have now found is that is the dates in the sheet TR rows 10:99 and one of the dates is outside the range so for instance if the range set by c1 and b1 is 10/3/14 - 20/3/14 and in TR there are dates:
12/3/14
08/3/14
it wont return anything but if the dates are
12/3/14
08/3/14
15/3/14
it will return 15/3/14.
Is there anyway that I can change it so it wont return 0 if the last one is outside the range.