The worksheet has two sections, Extra payments and Loan Schedule.
If a date in the Extra Payments section is within a range in Loan Schedule, the enter its corresponding value, or sum of values in the Loan schedule under its respective date.
I have a table with three columns. I'm building a calendar on a separate worksheet and am looking up the "value" based on a calendar date. So if a date falls within any of the ranges, I'd like to return the value in column C. For example, if the date is 02/07/12, I'd like for the result to be value 1, or if the date is 04/17/12, then I would like the result to be value 3. I've used a nested vlookup, but all that give me is the value when either the start or end dates match, but I can't get a value when the date falls within the range. If the dates were consecutive, I would simply use vlookup/TRUE, but the dates are not consecutive.
I am trying to count the number of instances of dates that occur in a single column. For example, I want to be able to count the total # of dates that occur between Jun and July, then a different count of dates occurring between Aug and Dec (see example below). I have tried this formula: =SUMPRODUCT((E11:E149>=1/8/2008)*(E11:E149<=12/31/2009)) but it comes back with zero.
Column A --------- 1/8/2008 5/8/2008 8/18/2008 9/18/2008
I have a bit of code (See below) which basically looks at a list of data in rows 10:99 and then finds a date that is between cells c1 and b1. If there is one the it puts that date in if not it leaves cell blank.
[Code] .....
The problem I have now found is that is the dates in the sheet TR rows 10:99 and one of the dates is outside the range so for instance if the range set by c1 and b1 is 10/3/14 - 20/3/14 and in TR there are dates:
12/3/14 08/3/14 it wont return anything but if the dates are 12/3/14 08/3/14 15/3/14 it will return 15/3/14.
Is there anyway that I can change it so it wont return 0 if the last one is outside the range.
I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
I have two worksheets in which I am trying to get the blue bold data (not text) derived from a formula.
Main
A B C 1 Site # First Apt Date Last Apt Date
[Code]....
Apt Report (month/day/year)
A B 1 Site # Apt Date 2 1001
[Code]....
I have some restrictions: I cannot alter the format of Main, except I can add columnsI cannot alter at all the data or format on Apt Report (I cannot sort, filter, pivot, add columns...etc)
Any way for Main to look at Apt Report and give me the earliest and latest appointment?
I have tried the DMIN function but am limited it seems to being able to change Main to accommodate it. I have tried an array with MIN(If but ran into issues with the cells on Apt Report that are blank...it would return those as the earliest appointment....albeit it is correct...but not what I need!!!
The Apt Report will continually be updated to, so I need to be able to search the entire Apt Date column.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
on the attached file I has three columns code; day; Trays. I want in G3:G9, by ascending order, all diferent days from the code C, I can avoid like this, that the users type that information. and so on G12:G18; etc.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
I need to put a formula which will show me required quantities under a relevant date which is already calculated in an aside table.
In the cell E8 I want it to look up for A8 in the table A35:AR45. Then in that row to find a date which is exactly the same or smaller than E7 and bring up all summed quantities from the table A50:A55 (quantities summed must be in the same column where the relevant date was found and in the row where the requirend part number is).
In the other hand I need to doin the cell H8 to llok up for A8 in the ableA35:AR45. Then in that row to find a date which is exactly the same as in H7 and bring up all summed quantities from the table A50:A55 (quantities summed must be in the same column as the relevant date was found and in the row where the required part number is).
I want excel to count the number of items in a range that I have named "Name" and I have another range that I have name "date" which contains (obviously) dates. The dates are in order. I want to count the number of items in "name" that are associated with the date in the "Date" range.
The problem is I want to count the names in a date range, which is todays date through to 30 days after. I have to days date already posted automatically in K1 [by the formula =TODAY()]
Essentially, count all the times "Bob" appears in the Range "Names" that appear in the next 30 days. My Brain hurts just trying to describe it
I need a formula that will give me a persons name that is stored in Column B based on the highest value within 5 named ranges. Each named range is a selection of every other cell in individual columns i.e. named range junior1 is cells in column E, named range junior2 is cells within column H and so on.
I've attached the worksheet as it as present.Sample Running Scores 3.xlsx
Cell Y3 shows the highest individual score shot (not handicap score) from columns E,H,K,N,Q (or more accurately the named ranges Junior1, Junior2, Junior3, Junior4, Junior5 within these columns). Each of these columns represents a different round in each league, in this case a Junior National League. I now need Y4 to show me the name of the person that shot the highest individual score, in this case Person 21.
I know I need to use a combination of Index & Max in some way but I can't work out what or how.
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559 Pallets: 3 Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code To Zip Code Pallets Weight From Weight To
I have been looking at a post number 170404 which NBVC answered with an example grid. This was while I was trying to bring searched data through to another sheet and this is just what I was looking for as a brilliant start,
I have attached my very similar example in my scenario. I have also got NBVC's example on the first two sheets of this as reference. In addition I am also bringing through from-to date ranges which I then need to be applied to a Booking Sheet so I can see that these dates are booked for this person, and ideally where they are going and what they need to do there by colour.
I tried, just as a test in this example the following. Please note that this only had the three ranges as I was testing an example coordinator which returned three date ranges. It could be that the example returns 20 or 30 ranges that need to be applied to the rather primative Booking Sheet.
It seemed to give the right answer initially but trying different dates it gave the wrong result. It seemed to be checking one of the ranges and not all of them. As mentioned above this was just an example to see what I could get working but I don't think that this would be the ideal way of doing this as it would need to check 30-40 maybe more ranges depending on what comes back from the coordinator search.
The aim would be to choose a co-ordinator on the Site Planner sheet and ideally return the city rather than the yes/no in the Booking Sheet for that date and use conditional formatting so that if the type from the Site Planner Sheet was paint it would fill in one colour, clean in another, etc.
Was hopefully trying to get this done without using any VB as I am trying to resolve this for my Wife she isn't very tech savvy and and I need to be able to explain the formulas!
I'm sure you will see from my sheet I have given this a good go but I am a bit unsure on what some of the formulas on NBVC sheet are doing, and that this is my first attempt at doing anything like this. I have also tried using lookup and match but I'm still having issues that they either aren't always in date order and it seems to return no if it doesn't match the first range. The other main issue that I have seen is that I need to check whatever ranges the selection comes back with rather than adding each one to search through.
I hope this becomes a bit clearer on the sheet I have attached,
I would like to use a pivot table to manipulate my data. However, I need to be able to select data within my data set by a range of dates (usually a week). Is there a way to use a pivot table but reduce the data set by a user enter range of dates?
The date field is the first column in my data sheet.
I need a 'simple' vba that outputs all the dates in a range that correspond to a particular ID in a column as well as that same ID in a column beside the dates.
So basically using the data in columns A to B as input, to get columns E and F as output.
I am trying to find out how many projects might be active as of a certain date.
I have a tab in excel that contains project data. For each project there is a "Start Date" and there might be an "End Date"
My question is, how do I count all the rows where the start date is Less than a given date and the end date is after a given date? The wrinkle is... if the end date is empty then obviously it should be counted as well (assuming the start date is still before the given date).
The attached workbook has dates in column C, although some of these dates are just strings.
I'm trying to write some vba that will tell me how many of the cells in column C contain a date (or looks like a date) that is greater than (after) the real date in cell G1.
At the moment I loop through the cells in column C and can ascertain, which dates can be counted, then copy one row over at a time, but I'm looking for a slicker (perhaps one-liner) answer, perhaps by copying a block of rows in one go. The aim is to copy those rows to another sheet. There are many more rows than in the attached, and many sheets to process, and I have no control over the format of the dates/strings in column C. Currently it takes about 20 seconds to copy over the necessary rows, but I'm looking for it to happen much more quickly; current thoughts are to sort on column C (sorting on column C anything that looks like a number as a number - which has it's own problems!), have a count of dates satisfying the criterion (say using a worksheet formula such as COUNTIF or SUMPRODUCT, perhaps also using EVALUATE) then copy a block of rows in one go.
not very relevant, but the existing code is something like this which highlights rather than copyies the rows(included in the attached): ...
Looking for a formula in excel, was thinking of an IF with AND or VLOOKUP?? I have a database in Excel that has
A B C 1 9/1/988/31/00RED 2 9/1/008/31/02BLUE 3 9/1/028/31/04GREEN 4 9/1/048/31/06YELLOW
What formula would I use to take a Date (lets say its located in A8) and look up if it is BETWEEN the dates in column A and B above that it would give the result of column C
Examples A8 = 11/07/99 would give the result of RED A8 = 03/02/03 would give the result of GREEN
If MonthView control can be set to allow users to select multiple ranges and enter different dates into those ranges? I know I was able to do with with the previous Datepicker control and I thought it was as easy as setting the Show Modal property to true.
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1 Restricted 5 etc
Example of data ie. a1 b1 c1 Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I have two tables. A list of accounts and the other is a change log. I need to add a new column in table 1 where the value is the amount in table 2 for the correct account and correct validity period.
How can I lookup the value depend on Which year in the period?. I have prepared clean data attached. I use date calculation to find how many days in the period and then divide by 365 day to count the year. But it doesn't work.
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.