I have Sheet1 and Sheet2. On Sheet2 I have some filtered items.
Now, is it possible to link the filtered items to Sheet1, e.g. =IF(Sheet2!B1=IsVisible;Sheet2!B1;"")
I do not want to make a copy/paste/vba turnaround.
In the sample worksheet, I need VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
sample2.xls
I have a data table with all my data in it. I want to be able to filter the data, and have a column automatically calculate a running (or aggregate) sum of the filtered (visible) information in a particular column of the table.
If you glance at the attached sample spreadsheet (in 2nd post!), you will quickly see what I mean. I am searching for a formula for column L that will caculate a running sum for column K. In column T, you can see the results that I'm looking to reproduce in column L. Each cell in column T simply adds the K column value for that row to the previous value in column T (the cell above). However -- to my knowledge, and as in this case -- the formula for column T can only be copied down the column AFTER the table has been filtered.
in the sample worksheet, I need help with a VB code to copy the formulas in column D, to paste them as values in the same cells (without removing autofilter by clicking on menu Data>Filter>Autofilter, then edit>copy>paste special>values).
View 3 Replies View Related[Code] ....
I have a page ("Property Register" with some 22 rows of data. I apply the filter as per the code and I can now visually see a header and two data rows which is what I need to have.
the row number of the last visible entry (actually showing as the third on the filtered page) is row 7, again correct as row 7 of my original page has the last value I am trying to find.
However, both of the two "last_row" lines return me a value of 7 whereas I really need it to be three.
Seems to me that I must have the wrong approach (s) to finding the last row so that I can only process the visible rows (I don't need the actual row at all because my processing depends on a cell value in the row).
I'm using a named range called "VFILTER". This range is my filter range. Once the filter does it's thing, I want to set the first visible cell in column a to a variable...I can't get this right for the life of me!
With Range("VFILTER")
.AutoFilter
.AutoFilter field:=25, Criteria1:="DELETE"
.Offset(1, 0).Resize(. CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible). _
EntireRow.ClearContents
.AutoFilter
JPhelper.ClearContents
JPhelper = "=IF(ISNA(MATCH(B5,J46DATA,0)),FALSE,TRUE)"
.AutoFilter
.AutoFilter field:=25, Criteria1:="TRUE"
.Offset(1, 0).Resize(.CurrentRegion.Rows.Count - 4, 9).SpecialCells(xlCellTypeVisible).ClearContents
'set the first visible cell in column a to variable
Set OutRange = .Offset(1).Resize(.CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible)
End With
I need to subtotal/sum a series of columns individually (one column per month across a date range) by the odd numbered visible/ filtered rows as well as (separately) by the even numbered visible/filtered rows. Preferably the totals would recalculate like a SUBTOTAL whenever the filter is altered.
I've explored using Mod and SpecialCells(xlCellTypeVisible) but I can't get a syntactically correct combination to bring back the desired results.
how to delete only visible rows in a filtered list?
View 9 Replies View RelatedFrom a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies View RelatedI have a data of a large no. of rows with 5 columns. The last 2 columns are district and state. As it is an imported data, in some rows the data has shifted a column, i.e. the name of state is being shown in district column and name of district is being shown in the column to its left. I tried filtering the data such that it shows only those rows where names of the states are coming under district columns and then selecting the whole thing, cutting it and pasting it to the rightmost column. But even the correct district entries got pasted under state column. Undo, the further damage was controlled, but the original problem remains. Now i will have to cut and paste each row or only consecutive rows.
View 2 Replies View Relatedwhat i need to do is store the number of rows visible on the data sheet (after a data filter is applied) into a variable so i can do a calculation with said data. Is there such a command?
for example....
data:
row header a | row header b
line 1
line 2
line 3
after auto filter:
row header a | row header b
line 2
code stores number of rows visible into a variable....
vVariable = rows visible... in this case 2 (NOT 4... which is the total rows including hidden)
I have data in one column that is the result of a formula, ie: =B2*B3. The result may display a decimal answer that goes out 4 places. My boss likes us to clean this up by using the = ROUND(B4,2). That is fine and easy enough, but the problem is that these numbers maybe spaced throughout a large sheet. I have to filter to make sure similar items are calculated the same way. The problem is that when I copy and paste, it copies and pastes all the data hidden between the displayed cells of the filtered sheet. How do I make it so I am only copying and pasting the data displayed and not the cells that are filtered out in between?
View 9 Replies View RelatedI have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
. AutoFilter Field:=1, Criteria1:="To be capped" 'TYPE
. AutoFilter Field:=29, Criteria1:="OPEN" 'STATUS
.columns(1).Offset(1,0).Resize(rng.Rows.Count - 1,1).SpecialCells(xlCellTypeVisible).Value = "Capitalised"
I have a database that holds thousands of names and the columns are of trinings that they have completed. I can filter by the criteria of name and of ID. ID number is unique so what I want is to know if Column F has a date in it once filtered. It maybe line 789 but that is all it shows because the filter is on.
View 2 Replies View RelatedI'm working through a filter macro to delete unecessary rows of data from my dataset.
- I have a Dynamic Range for my dataset called "CanadaData"
- I'm trying to delete rows from the 5th column of my dataset for cells containing "DIRECTSHIP"
The macro filters the range fine, but when if comes to deleting the row, the macro stops.
Sub CanadaWarehouseFilter()
x = Range("E" & Rows.Count).End(xlUp).Row
If Application.WorksheetFunction.CountIf(Range("E22:E" & x), "DIRECTSHIP") > 0 Then
With Range("CanadaData")
[Code] ......
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
I have a workbook that lists various shipment numbers and their contents to several locations. What I am trying to do is, on a different worksheet in the same workbook, list all shipments to one location; having different worksheets for each specific location.
I am sure there must be an extremely simple solution to this, however I am unable to locate it.
Also I would like the separate location worksheets to autoupdate when new shipments are entered on the main worksheet.
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
I'm looking for a formula that will display the contents of a cell location. In other words, I have a sortable list (example: A3 - C20, where column C cells contain either: "EEE", "FFF", OR "GGG"). If I sort by "FFF", it will only display rows with that criteria. I need a formula to place in C1 (above the list), that will display the contents of the top cell in column C of my list, reguardless of how it is sorted.
Similar to the subtotal formula, but with text.
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies View RelatedI have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedI am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies View RelatedI have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
I am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.
The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.
Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True
I have seen the similar progress indicator during the "Save" event too. How to hide this?
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
