Display Filtered List On A Different Worksheet
Sep 21, 2007
I have a workbook that lists various shipment numbers and their contents to several locations. What I am trying to do is, on a different worksheet in the same workbook, list all shipments to one location; having different worksheets for each specific location.
I am sure there must be an extremely simple solution to this, however I am unable to locate it.
Also I would like the separate location worksheets to autoupdate when new shipments are entered on the main worksheet.
View 6 Replies
ADVERTISEMENT
Aug 26, 2009
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
View 6 Replies
View Related
Feb 27, 2014
I have a worksheet with a lot of different conditions applied to a lot of cells. I'd like to do some housekeeping, but to do that, I would like a clear and complete list of all cells that have conditional formats attached to them, and what the formula/criteria is for applying said format. I don't even care what the formatting is, but that would be nice too.
So, when I go to my "Conditional Formatting" screen, I get something like:
Now, this doesn't show me much of anything about what the formula actually is. I need to select it and look around. I'd rather just get a full listing of what the rule says...
And where I might have the same rule applied to different ranges of cells And so on.
View 2 Replies
View Related
Jan 28, 2013
I have Sheet1 and Sheet2. On Sheet2 I have some filtered items.
Now, is it possible to link the filtered items to Sheet1, e.g. =IF(Sheet2!B1=IsVisible;Sheet2!B1;"")
I do not want to make a copy/paste/vba turnaround.
View 2 Replies
View Related
Jun 24, 2014
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
View 2 Replies
View Related
Jun 7, 2007
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
View 9 Replies
View Related
May 19, 2014
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies
View Related
Feb 18, 2014
I am trying to sum a filtered list and when a filter changes I want the sum to change and it isn't right now. I have attached a TEST workbook in which all the data is values but in my situation all of the data is actually read from a workbook from each agent.... not sure if that matters.
If I filter by District (East or West), how would I get the total to change? I am trying to avoid any vba or macro within this workbook.
View 4 Replies
View Related
Apr 14, 2005
I'd like to have a dynamic report that ranks my lists based on an autofiltered list. In other words, I'd like to toggle the criteria that qualifies the lists content, and have excel generate "ranks" based on the values returned. Currently the rankings are based on the overall list, includeing the records that are filtered out.
View 4 Replies
View Related
Dec 21, 2009
I am trying to write a macro that will let me loop through an auto-filtered list (column C in example file) . I want to filter for a criteria (in this case a network), copy the filtered data, paste it onto a new workbook and save it. Although I have been able to record a macro (see below) that can do this, I have to copy and paste this macro over and over again for the other networks. I would like to know if there is a macro that can loop through each criteria in an auto-filter list, copy and save the data into new workbooks for me. I've attached a sample workbook that should be helpful in understanding what I'm trying to do.
View 11 Replies
View Related
Jan 17, 2008
I have a list 10 of names in Column A. ( On sheet 1 )
I then filter column A to show only three specific names, or four names etc. . .
On Sheet 2, in cell A1, I would like to list the three filtered names from column A on sheet1
e.g. if the three names showing in column A ( Sheet 1) are: john, mary, jane . . . then on sheet 2 cell A1, I would like to see: "john, mary, jane"
View 9 Replies
View Related
Apr 28, 2009
I need to apply a dynamic filter to my constantly changing list.
Here's an extract of the fields in Sheet "Materials". I need to filter by an of the Type Levels or by the "Index #" fields. The result would be used in another sheet. The return value should be a filtered list from the "Full Material Name" field.
Material IDIndex #Type Level 1Type Level 2Type Level 3Type Level 4Material NameFull Material NameM0000110010Class 0 - Raw MaterialsSection 0 - Metallic MaterialSheet & PlateGalvanized10gSheet & Plate - Galvanized - 10gM0000210010Class 0 - Raw MaterialsSection 0 - Metallic MaterialSheet & PlateGalvanized12gSheet & Plate - Galvanized - 12g
View 12 Replies
View Related
Sep 16, 2009
I'm trying to write a macro that goes through every value in a filtered list.
Specifically, I'd like the macro to select the first value in the filter. Perform the operation. Select the second value in the filter. Perform the operation. Select the third value in the filter. Perform the operation. Etc...
View 9 Replies
View Related
Apr 19, 2006
I need to perform a lookup on the first row of a filtered list. i.e. If I search for VCP/3301/MP the filter displays all rows containing that part number. The first row after the header row may be say A320. The next time I search for a different code the first row may be at A120. How can I select this first row for my lookup?
View 7 Replies
View Related
Apr 25, 2007
I have a macro I'm working on and am requesting your help.
In my filtered data, I have an empty column. For each cell in that column, I'd like to insert text, based on the results of the filter criteria.
I am using VBA only, modifying a huge .txt file into a .xls file. The ranges are dynamic.
I am successful in my results, aside from this issue.
View 6 Replies
View Related
Mar 23, 2014
In Worksheet A I have hundreds of Rows... Column 2 has a Type in it and not all rows will have a type and then there are various data elements in column 3, 4, 5 and 6
What I would like to do is in a worksheet B have a formula on each of the cells on a row that would look to worksheet A and would find the first row to match the type value in column 2. I would then want to lookup the value of column 3, and 4, and 5 and 6. Then in worksheet B, the next row the formulas in the cells that would also match type and would continue with the NEXT row in worksheet A that matched the type and again retrieve the appropriate cells. It would continue stepping through the rows of worksheet A until I had all of the now displayed in worksheet B
Basically I want to built a subset of worksheet A into worksheet B using the value of the Type column in worksheet A.
I suspect I am going to need to use multiple forumulas nested together in some way to achieve this.
View 3 Replies
View Related
Sep 12, 2007
I have a sheet which contains filters, however I need to use a countif based on criteria of the filter & I only want to count the visible names down column A
I was attempting to modify
=countif(subtotal(2,Analysis!A:A),Sheet4!J2) not work, is there a better method?
View 9 Replies
View Related
Mar 8, 2013
I would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.
View 3 Replies
View Related
Oct 17, 2013
I would like to know how to create a validation based on a list, but with filtered. I have an employee sheet and another sheet to select the names but only according to a specific job.
View 7 Replies
View Related
Aug 7, 2014
I am working on a sheet to check different outlets turnover, margin etc. on a certain product group or department in a certain week.
There are about 50 outlets of which the information comes to me in a raw data file with around 40.000 rows of weekly data. Each week gives qty, turnover, margin.
What I do now is to filter the raw sheet to the product group that I want the info from and then loop through the filtered rows.
View 1 Replies
View Related
Apr 30, 2009
I have extracted a report from a web package into Excel - basically a list of documents held on our website. The Cells in Column B would have the word Title or Description, Column C would have the actual title of the document, Column D would be blank on rows with Title in Column B and Column E has a Document ID (DocID)Number. To make this easier to read is it possible to filter Column B using Title and then move the DocID number from Column E to Column D.
I have attached a shortened version of the spreadsheet with the filter applied in Column B already. The real spreadsheet is 1000 lines long and would take quite a while to drag and drop each DocID number from Column E to D. I assume this can only be done with VBA.
View 4 Replies
View Related
Jul 7, 2009
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
View 4 Replies
View Related
May 11, 2012
I can see that I'm not allowed to delete rows from a list when it's filtered. Do I have any options to avoid this restriction?
View 2 Replies
View Related
Nov 1, 2007
I need to identify values which are less than 0 and move those cells to an adjacent cell.
Acct Desc Amt
2100 Acct1 -10
2101 Acct2 10
The -10 cell will move one cell to the right. I have an imported list with gl accounts, descriptions and amounts and want to have the negative values moved to a new column.
View 9 Replies
View Related
Feb 21, 2008
How can I find the median in a filtered list of numbers?
I don't see median as a function of subtotal.
View 9 Replies
View Related
May 8, 2009
{=SUM((C2:C8="black")*(B2:B8="sneakers"))}
I’ve got following formula counting different kind shoes that are black and sneakers and above formula work very well. What I wonder is if you can convert above formula to count these items in a filtered list. Could you use the subtotal-function in any way?
View 9 Replies
View Related
Jun 27, 2008
In Excel 2003, when I had a filtered list, I could enter text in a column and copy that text "down" to the "visible" rows- and it only copied to those rows. In Excel 2007, when I do a fill down or use the fill handle, it copies the text into the "hidden" rows as well as the visible rows. Is there an option or alternative way to "fill down" in a filtered list to only copy to the visible rows? Auto Merged Post Until 24 Hrs Passes;I did further research elsewhere on the web - it appears to be a known MS bug - here is the text I found that addresses the issue:
If you place your cursor in a cell within column A, before you make the
selection from the dropdown on that column, then the fill handle will behave
correctly. If the cursor is place anywhere outside of the autofiltered range before
making the selection with the dropdown, then you do get the behaviour as
described. It is a bug, MS do know about it. Alternatively, you can choose Insert tab>Table to apply to your data, rather than using Autofilter. The Data table has the same dropdowns, and the autofill feature always works correctly when you make a filtered selection and then fill down.
View 3 Replies
View Related
Jan 18, 2013
I have a worksheet set up with a number of pivot tables to show job summaries for each project manager. I created buttons labeled with each project manager that trigger a macro to filter the results to only show jobs for that specific project manager. There's one button for each project manager.
I'd like to create a macro that will essentially show each project manager's report and compile the result into one PDF. I only have 5 project managers so I don't need an array or anything if that makes it easier, I could write the code manually for each one.
So basically, it would do this:
1. Run macro to filter results to only show Project Manager #1 jobs.
2. "temporarily" print to PDF.
3. Run macro to filter results to only show Project Manager #2 jobs.
4. "temporarily" print to PDF.
5. Run Macro for Project Manager #3, etc.....
...............
Final step. Compile all the "temporary" pdfs into one file.
View 2 Replies
View Related
Feb 21, 2008
I am populating a 2nd temporary worksheet from a primary using autofilter which works just fine. I have been asked to set it up to populate the 2nd sheet using the same autofilter criteria across two or more of the primary sheet columns. I have been looking through the forums and found an article in which this process is described, #2 The power of Autofilter in VBA - Part 2, and I would like to ask if this will do the job for me.
I did attempt to create my own code, but it didn't work with a loop that I created. I do use input boxes to gather criteria from the user. I have put a copy of my code below which doesn't work, but need to know if the code in the article mentioned above will work?
Option Explicit
Private Sub UserForm_Initialize()
On Error Resume Next
' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl
End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, _ ................
View 4 Replies
View Related
Apr 11, 2008
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
View 9 Replies
View Related
