Display Values In Separate Worksheet Only If That Value Is Greater Than 0
Feb 12, 2014
I am trying to build a report based on data in a separate worksheet. The report must only show the name of the value and qty associated with it only if the qty is greater than 0.
As an example, the values can be colors.
Column A = Names of Colors: Red, Blue, Green, Yellow, Black
Column B = Qty of each Color: 5,4,0,1,0
The report is held on a separate spreadsheet. I would like to only show the values that have qty's greater than 0, not any values that have a value of 0.
I've attached a sample workbook just in case.
View 7 Replies
ADVERTISEMENT
Dec 15, 2011
I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
View 6 Replies
View Related
Oct 23, 2006
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies
View Related
Jun 8, 2014
Want to be able to select a month (Jan - Dec) set in a range A1:L1. When the selection is made, I want the selected cell to be displayed in a separate location e.g. cell C4, but if the selection is outside the range A1:L1 then C4 to remain blank.
View 5 Replies
View Related
Feb 7, 2014
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
View 1 Replies
View Related
Dec 16, 2008
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
View 5 Replies
View Related
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
Jun 3, 2008
I have a huge sheet with data. I want to fix all values exceeding e.g. 2000 to 2000.
for instance:
400 --> 400
1600 --> 1600
2300 --> 2000
700 --> 700
3100 --> 2000
etc.
View 9 Replies
View Related
Sep 12, 2007
In columns A and B, I have a list of time values. Format: [h]:mm:ss. Column C is B-A. Last row of Column C is the sum of all time values of column C. Sometimes A>B, or either A or B is blank. In such casescorresponding C value becomes ##### (negative date and time) And hence sum of all C values which is in last row of C becomes ####.
View 2 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Dec 10, 2008
I want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.
View 4 Replies
View Related
Nov 4, 2010
I want to replace all numbers in the worksheet which are greater than 200 with 200. I mean all numbers greater than 200 should be set to 200. values are not all in the same column or same row, they are spread throughout the worksheet. I tried using the Find and Replace, but it can replace only a specified value with only another specified value. I want to use some kind of a filter which will choose all numbers greater than 200, and make them 200.
View 8 Replies
View Related
Jul 3, 2014
I'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
View 5 Replies
View Related
Jan 5, 2010
Members in our club enter competitions each month and receive scores. I want to be able to average the top five scores from the last ten competitions each member entered, keeping in mind that not all members enter all competitions and will score 0 in this situation.
Its easy if members enter every competition, but I want a formula that will work also for when members may only enter 10 of the last say 15 competitions and I still need to find the average of the top 5 scores.
Member Name is in A1, and then scores are in A2-A25.
View 9 Replies
View Related
Jul 19, 2009
I have a column of values. If a row's value is greater than 0, I want to count it as a value of 100 and add the result. I can get this far: =SUMIF(H11:H12,">0")
...but I don't understand what would come next. What I am trying to do is to use the above formula to total the actual sum of an array and then to also create a second column which assigns a maximum value total based on each row's non-zero result being worth up to 100. Using the above formula as a reference again, the formula that I am seeking would return a total value of 200 if both H11 and H12 contained any value greater than 0. I plan to use these two results then to calc a percentage.
View 2 Replies
View Related
Oct 17, 2006
I am using vlookup to read a 3500 from the table below.
"Vd =65mph
R(ft)"e
126001.5
91302.0
82002.2
74302.4
67702.6
62002.8
57103.0
52803.2
48903.4
45403.6.......
My question is how do I write the formula so that it looks up a radius of 3500 by looking up a value slightly smaller than 3500, in this case 3440 and return the value of 4.4
View 3 Replies
View Related
Oct 4, 2007
I am trying the sumproduct funtion,but getting #value error.I only want to sum up values greater than zero,omiting blanks,formulas
View 9 Replies
View Related
Jan 14, 2008
I have 2 sheets, i need to transfer every cell value criteria >0 from sheet2 to sheet1. See the code below
Sub datatransfer()
Dim rngqty As Range
Dim nextcell As Range
Set nextcell = Sheet1.Cells(Sheet1.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Reqorder").Activate
For Each rngqty In Sheets("Reqorder").Range("c4", "n57")
Do While rngqty>0
Cells(rngqty.Row, 1).Copy
nextcell.PasteSpecial (xlPasteValues)
Cells(1, rngqty.Column).Copy
nextcell.Offset(0, 1).PasteSpecial (xlPasteValues)
rngqty.Copy
nextcell.Offset(0, 2).PasteSpecial (xlPasteValues)
Loop
Next rngqty
End Sub
View 8 Replies
View Related
Apr 3, 2014
I am creating a spreadsheet that allocates hours to different categories of work - for example, "Fire Protection". I need the allocated hours for all of the different Fire Protection duties to only show up when a value greater than zero is entered in the column at the top of this category entitled "Fire Protection". If "Fire Protection" has a value of zero, then all fire protection-related duties will automatically be zero as well - in effect, this category of hours is nullified.
View 1 Replies
View Related
Nov 3, 2008
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B?
=(IF(A5>0,A5/B5,""))
something like?:
=(IF(A5>0 and B5>0,A5/B5,""))
View 4 Replies
View Related
Apr 27, 2009
I have two columns A and B. I need a count of how many times a value in B is greater than the same row in A. I don't want to insert a new column (e.g. for if statements to add up).
Can I insert a countif at the top to do that? I tried various countif variations but could not find the right one. Additionally any other option that does not involve adding new columns/rows.
View 5 Replies
View Related
Dec 2, 2009
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies
View Related
Oct 24, 2012
How can I extract the unique values from the original list but only those whose their SUMIFS is greater than zero? in my example "Blue" , "Yellow" & "Red" should not be extracted.
Sheet1 ABCDE1Original Unique2Purple10 Purple103Blue0 Blue04Pink1 Pink15Yellow0 Yellow06Green13 Green31
7Blue0 Red08Green18 Black29Yellow0 10Red0 11Black2 12Pink0 13Black15 14Purple6 15Red0
Spreadsheet FormulasCellFormulaD2{
=IFERROR(INDEX($A$2:$A$15,MATCH(0,COUNTIF($D$1:D1,$A$2:$A$15),0)),"")}E2
=IF(D2<>"",SUMIFS($B$2:$B$12,$A$2:$A$12,D2),"")D3{
=IFERROR(INDEX($A$2:$A$15,MATCH(0,COUNTIF($D$1:D2,$A$2:$A$15),0)),"")}E3
[Code] ...........
View 9 Replies
View Related
Jan 29, 2013
Basically, I have data that have the titles:
Year Max allowed A B C D E F
1999 55 45 23 60 53 53 57
2000 59 45 23 60 53 53 57
2001 51 45 23 60 53 53 57
And data for several years. Each year has a particular maximum allowed exceptions per process (A, B, C etc)
I basically would like =countif(columns that contain A through F, for values greater than Max allowed for that specific yeat)
Is there a way that I can get the countif to recognize the value under max allowed as the "tripping" value for the row A through F?
So I would get a value of 2 for row 1999, 1 for 2000 and 4 for 2001
View 3 Replies
View Related
Jun 7, 2013
I've two columns in an excel sheet... In column A, I have years & in column B, I've amounts... Now I have made pivot table for the same to have an exact picture of this table... Now, I need a formula applying on pivot table that may identify the amounts in specific years great that 50,000 then great that 50,001 to 100,000 then 100,001 to 150,000....
View 1 Replies
View Related
Sep 7, 2006
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
View 2 Replies
View Related
May 13, 2014
[Code].....
In the file I have attached, this code works great taking information that has a value greater than zero from Sheet2 and putting it onto Sheet3. I tried to use this code to take information from Sheet1 from different cells than Sheet2 and also put it onto Sheet3, but I can not get the code to do anything.
Example.xlsm
View 6 Replies
View Related
May 14, 2014
I am working on a Golf League score sheet, and each week there may be a different amount of players that play. I have a weekly worksheet (attached) that contains the full list of golfers that had played that week and I only want to sort the columns for those golfers who have a score greater than 0 (this would be the ones who played that week). You can see that in week 1 I had more players than in week 2. So in my weekly worksheet I sort these sub grids by Score first. However I ONLY want to sort the rows that have a score greater than 0. Can this be done in VBA or am I stuck doing this manually every week?
Week1.PNG
Week2.PNG
View 9 Replies
View Related
Aug 15, 2006
How can I use COUNTIF to count the values in a range which are greater than 0?
I put =COUNTIF(B2:B100000)>0 but that didn't work?
(I'm using XL 2007 hence the range greater than 65000 rows. But I don't
think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain
fart.)
View 3 Replies
View Related
Jul 2, 2008
I have a problem which is beyond my capabilities. I need excel to sum amount column (See example table below) by unique values in company column then conditionally sum those values based on the year of investment, stage of company and finally, the kicker, the summed Amount by unique companies value has to be less than a certain threshold.
For example, I want companies in Stage Column of Exit only and in year 2004 only BUT only if the sum of the Amounts by unique company values is less than 100. So in the example table this would return 0. I have code and criteria written to sum unique values based on similar criteria such as sum if company Stage is Seed and Year is 2004 but for the life of me I can't seem to make the jump further.
For Unique values I used this function:
=SUMPRODUCT(($B$2:$B2=Year04)*($D$2:$D2=StageS)*($A$2:$A2=$A2))=1
Then:
=DCOUNTA($A$1:$D9999,2, Criteria)
or
=DSUM($A$1:$D9999,2, Criteria)
This along with criteria explained before returns the number of unique companies that are Stage=Seed and Year=2004 or sum of amounts with that criteria.
I am trying to adapt this technique to get what I want but to this point have been unsuccessful. My best guess is that I will need to create an array of the unique companies (New Sheet column A) with the Summed Amounts (New sheet column B) and then run functions again with the easier equations and criteria? I am trying to avoid combining company records as each investment needs to remain individual and there are 16000 records. Any help would be greatly appreciated.
Company Year Amount Stage XYZ 2004 10 Seed XYZ 2004 20 Seed ABC 2004 5 Early ABC 2004 25 Early DEV 2004 14 Later DEV 2004 19 Later TRU 2004 100 Exit TRU 2004 120 Exit TRU 2004 100 Exit
View 9 Replies
View Related
