Count Number Of Cells Between Recurring Cell In A Column
Aug 15, 2012
code that will count the number of cells under a "title cell" that is recurring in a column, and then divide the result by 2. The result will then be displayed in another column preferably aligned to the "title cell" (in this case "Items") in column A.
For example:
Before code is applied
A1: Items
A2: Items
A3: four-legged
A4: dog
A5: two-legged
A6: chicken
A7: Items
A8: four-legged
A9: cat
[code]....
After code is applied to column A
A1: Items B1: 0
A2: Items B2: 2
A3: four-legged
A4: dog
A5: two-legged
A6: chicken
A7: Items B7: 1
A8: four-legged
A9: cat
[code]....
View 9 Replies
ADVERTISEMENT
Jul 25, 2012
I have a spreadsheet with two columns of data. Column A consists of identifying 6-digit numeric code and column B is the dollar value associated with the code in column A. There are numerous cases where the column A code is repeated, but with a different dollar value in column B. The column A value could be repeated two, three, or many times. What formula could I use to create a new set of columns that rolls up the instances of recurrence?
Sample included.
View 4 Replies
View Related
Jun 22, 2009
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
View 2 Replies
View Related
Jan 13, 2014
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
View 5 Replies
View Related
Jan 9, 2014
I would like to count the number of cells that contains a date in each month.
I have attached my workbook here: Book2.xlsx
View 4 Replies
View Related
May 29, 2014
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
View 2 Replies
View Related
Dec 11, 2012
I am attempting to count a number of cells in one column so long as they fall within a certain date, which is located in another cell in the same column. I'm trying to account for a number of reports that happened within a certain week.
The formula I came up with was
=COUNTA(COUNTIFS(A_DATE,">="&B2,A_DATE,"<="&D2))
But this returns 1 more then it should no matter what. Even when all cells within A_DATE are empty. it returns 1.
I know the COUNTIFS portion works to count the cells between certain dates.
Is what i'm looking to do possible or am I suffering from Excel burnout and just can't see that logicaly it makes no sense?
View 2 Replies
View Related
Jan 19, 2008
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies
View Related
Mar 6, 2014
I have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
View 2 Replies
View Related
Jul 31, 2014
I have one collum with number ranging from 0-1000 in. I have another collum titled "above 90".
How do I get the "above 90" collum to display as 1 if the number in the other collum is above 90?
I understand it must be some kind of "COUNTIF" function but not sure...
View 7 Replies
View Related
Feb 13, 2013
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub
View 2 Replies
View Related
Mar 10, 2014
I have a set of data with daily total returns (TR) for 218 companies on the FTSE350 between 2007-2013. The Data looks as follows:
Company ..............Date(daymonthyear)..... TR
1........................... 112007 ..........................10.4
1 .......................... 212007 ..........................10.2
1 .
1 . .
1 .......................... 30102013 .........................12.3
. . . .
. . .
. . .
2............................112007 .......................... 4.5
2 ............................212007 ..........................4.6
2 .
. .
. .
Etc.
. .
. .
218.......................30102013 .....................13.2
I want to perform a dickey fuller test to see if there is a unit root, but for this I can’t have repeated time values, thus I need to create a daily average TR for each day (Thus summing up all TR values for all companies that have data on TR available on that day and averaging them).
How in excel can create an average value for TR every time a series of numbers in the “date” column take the same value? The best thing possible would then be if this could appear so that I have a data set that looks like
Date (daymonthyear)........ TR
112007 ..............................13.2
.
.
.
.
30102013............................ 9.4
View 2 Replies
View Related
Dec 3, 2011
Using Excel 2007, how can I associate a recurring name in one column with one and the same number in another?
Ex.: "Jones" in C8 = "1" in G8
"Smith" in C9 = "1.5" in G9
"Williams" in C10 = "2.5" in G10
I hope my question is clear enough.
View 2 Replies
View Related
Mar 28, 2014
I am trying to solve problem with finding cells (all searching cells are in 1 column ) witch contains only recurring characters like : 00, aaaaa, 444444444 , etc.
View 3 Replies
View Related
Apr 10, 2012
I have 10 columns and 18 rows. Every 2nd row might contain a number. I need to sum those numbers, however, sometimes group of cells in a row can be merged and i value of a cell is then 0.
example:
A1 to D1 merged; value 6
A3 to B3 merged; value 3
B5 to E5 merged; value 2
=sum(A1,A3, A5) would return 9 - correct
=sum(B1,B3, B5) would return 2 - should be 11?
=sum(C1, C3, C5) would return 0 - should be 8?
=sum(D1,D3, D5) would return 0 - should be 8?
=sum(E1, E3, E5) would return 0 - should be 2?
View 9 Replies
View Related
Aug 7, 2013
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
View 9 Replies
View Related
Apr 22, 2009
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
View 5 Replies
View Related
Jun 6, 2014
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..
I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...
What would be the best way to accomplish this?
View 4 Replies
View Related
Mar 2, 2012
I have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.
In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
0
0
View 3 Replies
View Related
Apr 11, 2014
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
View 2 Replies
View Related
Feb 5, 2010
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies
View Related
Jun 23, 2009
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
Jul 27, 2006
I have 2 columns - Column A and Column B. I want to count the number of
'YES' in column B ONLY when Column A is blank.............
View 2 Replies
View Related
Mar 17, 2014
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
View 3 Replies
View Related
Mar 29, 2014
Getting a formula or macro that count the number of blank cells between 2 cells with data (numbers) in 1 column. E.g.
1
Blank
Blank
2
Blank
Blank
Blank
3
...
In this case the blanks between 1 and 2, between 2 and 3 to be displayed in an adjacent column.
View 3 Replies
View Related
Mar 5, 2007
Looking for a formula that counts the number of X's in Column D (Cells D8 to D65536) that have the word CVT in the corrsponding column F.
so if cell d12 has an X in it and cell F12 has CVT in it then it should count as 1
this would count for the whole cells
View 9 Replies
View Related
Oct 15, 2012
I have a spreadsheet that I want to use to plan projects across days and I want to assign a task to any one of four people. there maybe more than one task in any project that the same person may be assign to. Want I want to do is count how many assignments they have on that day. I've tried using things like vlookup, row(), hlookup and a various combinations of these with countif, or maybe dcount, I'm just not sure, but I think I'm finding it too tricky.
I've uploaded the sheet here..[URL] .....
So in other words how many tasks does person y have if the x is on their row. The person is a data validated drop down list so if the person changes from y to b then this will effect the total at the bottom.
View 2 Replies
View Related
Jul 19, 2013
I have a following Data in One of the Column. I want to count the number of instances.
Ex. There are 3 instances for 120412 , 2 instances for 120471 , 1 instance of 120478 and so on. How to write a formulsa for this?
Configuration: Test ID
120412
120412
120412
120471
120471
120478
128715
128722
128723
128724
128725
129291
129329
8984
8984
View 3 Replies
View Related
Jul 23, 2014
Row Number (A)
ID Number(B)
No.of Repetitions(C)
1
1234
4 or TRUE
2
2538
1 or FALSE
[Code] ............
In need checking if a particular ID number is repeated more than once in column B. I need to write a formula in each cells of "No.of Repetition" column or Column C to check if respective ID number in column B is repeated more than once and display the count or display a condition true or false.
View 6 Replies
View Related
