Dynamic CustomUI Combobox
Jan 4, 2010
I've created my menu. It has a new tab, two group, and some controls. My task is to load strings into one of the comboboxes from a list on a sheet. The id of the combobox is cmbo_ReachesCombo. I grabbed some code from Andy Pope's site that changes the text for a editbox. I tried to adapt it to my combobox, but it didn't work.
Public Sub cmbo_ReachesCombo_getText(control As IRibbonControl, ByRef returnedVal)
' Code for getText callback. Ribbon control Reaches Combobox
'
Dim R As Range
Set R = Sheets("Options").Range(Range("ReachPagesHeader").Offset(1, 0), Range("ReachPagesHeader").Offset(20, 0).End(xlUp))
returnedVal = R.text
End Sub
View 9 Replies
ADVERTISEMENT
Feb 24, 2014
Attachment 299651
I have turned a Workbook with Macros into an add-in. The macros work perfectly for the intended purpose: copy selected data in a special way and put it into an e-Mail message.
I used the CustomUI Editor to assign a macro to a Ribbon button.
However, when I turn it into an add-in and click the Ribbon button, it doesn't work on my machine or any other machine, with an error that says "Cannot run the macro 'CreateListofInventory'. The macro may not be available in this workbork or all macros may be disabled.
My macros are not disabled, and the add-in doesn't even work in the book where the macros reside.
View 2 Replies
View Related
May 14, 2014
I have made TAB using Custom ID Editor but it is available in particular file how to make appear that TAB in all excel ?
View 3 Replies
View Related
Nov 18, 2008
I am working in excel 2003. I have a number of combo boxes, and I would like to get the listindex of a given box. It is easy to get the value of the box number "x"
Controls("Combobox" & x).value
works no problem, however
Controls("combobox" & x).listindex
does not work, and while I can do
Combobox1.listindex
I cannot figure out how to make the 1 a variable.
View 4 Replies
View Related
Nov 21, 2013
i have a combobox(form control) that has its listfillrange property equal to a range("A1:a10") on sheet1. The combobox allows for user entry and i am trying to create code where it adds the value entered in the combobox to the range("a1:a10) on sheet1 if its not already within the list. Then set the last value used as the listindex of the combobox.
View 2 Replies
View Related
Jul 20, 2007
how to control the contents of one combobox based on the selection made in another combobox. But, for some reason, ComboBoxTime1 (as shown in the code below) will only display the first item in the Dynamic Named Range when the user clicks on the pull-down arrow. The Named Range is consistent in size (4 cells) for each of the selection options in ComboBoxDay1. why only the first of four options are displayed in the second combobox?
Also, when a selection is made in the first combobox, the second combobox immediately displays the first item in the Dynamic Named Range (the one selection option it allows). I would prefer for it to remain blank until the user has selected an item from the pull-down list.
Private Sub ComboBoxDay1_Change()
Dim strRange As String
If ComboBoxDay1.ListIndex > -1 Then
strRange = ComboBoxDay1
strRange = Replace(strRange, " ", "_")
With ComboBoxTime1
.RowSource = vbNullString
.RowSource = strRange
.ListIndex = 0
End With
Else
LblTime1.Caption = "Time 1:"
End If
End Sub
View 3 Replies
View Related
Jan 30, 2014
Trying to create a dynamic chart herewith control in combo box.
Chart 2.xlsx
View 3 Replies
View Related
Aug 21, 2013
I want to create a cascading combo box from some values that I have, ill explain how I approached it.
Cascading combo box is a combobox which values are obtained depending on the answer of a previous combo box.
So I set up a little table like so:
Categories Car Train Bike
Car Mercades First Honda
Train Ford Western Ducati
Bike Skoda Red Suzuki
and the combo boxes would be set aside from that.I collected the data in Named Ranges (A Range for Categories, A Range for Car, A Range for Train...)
The first data validation box contains = Categories the second data validation box contains =INDIRECT($C$2) (Where C2 was the range of the first validation box)
Once this was working, I decided to change the formula for the named ranges to allow me to add more values.
The formula was: =$F3$F8
I changed it to: =OFFSET($F$3,0,0,COUNTA($F3:$F96),1)
I expected this to work however, it just doesnt.... when clicking on the drop down arrow for the validation box, nothing happens. No box or values or dropdown.
View 2 Replies
View Related
Jan 16, 2012
I have created a userform where I have a combo box and an options box. I want the combo box to reference a specific list of values. And if the check box is selected, I want the same combo box to reference a different list of values. This is the present syntax I am using. For some reason, The value of the check box does not alter the list in my macro.
Private Sub Userform_Initialize()
If chkHeader.Value = True Then
cmbSort1.Clear
With cmbSort1
.AddItem Range("A1")
.AddItem Range("B1")
.AddItem Range("C1")
[code].....
View 9 Replies
View Related
Oct 25, 2007
I am unable to reference the combobox's rowsource to another sheet dynamically
The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Private Sub UserForm_Initialize()
combobox1.RowSource = sheets("testing").Range("L2", Range("L65536").End(xlUp)).Address
End Sub
View 3 Replies
View Related
Jul 28, 2013
I have a Excel 2010 file that I want to activate the file and create a folder in it named customUI.
the steps to achieve this?
View 7 Replies
View Related
Feb 4, 2012
I have a golf teetime reservation spreadsheet. For each tee time there can be up to four players names so I use 4 columns. Times are listed in rows every 10 minutes beginning 6am until 5pm for a total of 66 rows per day. I have a member/customer list that I have on a separate sheet that I've named. I am using the ActiveX combo box next to each possible entry (so 4 columns times 66 rows = 264 combo boxes). It's a little slow and takes a long time to open. I like the ActiveX combo box because it allows me to define the box format and display and it allows search/read/write capability. The idea is the customer calls, I ask what time they want and we arrive upon an available time. I ask for a last name, I click the combo box, type the first letter of the first name and then scroll if necessary to the name and click it to add the name to the time/player cell. If no name in my list we simply type it in and I'll capture it next time I refresh my customer list.
way to dynamically define the linkedcell in the properties so that instead of 264 combo boxes, I might have one combo box that I can click on and then direct my selection to the cell I want it to go into.
View 5 Replies
View Related
Jun 28, 2007
(Auto)Filter or a listbox somehow functioning like it?
Hi Excel guru's, i've got the following question:
Can I fine-tune the AutoFilter function so it filters more flexible? ....
View 9 Replies
View Related
May 21, 2008
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies
View Related
Oct 8, 2013
I'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
View 1 Replies
View Related
Aug 10, 2014
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
View 4 Replies
View Related
Aug 21, 2014
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
View 11 Replies
View Related
Mar 30, 2009
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
View 9 Replies
View Related
Mar 30, 2014
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
View 1 Replies
View Related
Dec 8, 2009
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies
View Related
Jun 20, 2009
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
View 14 Replies
View Related
Sep 28, 2013
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
View 2 Replies
View Related
Jun 12, 2006
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
View 9 Replies
View Related
Feb 8, 2008
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Jun 21, 2009
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies
View Related
Nov 27, 2012
I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
View 8 Replies
View Related
Jan 23, 2009
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
View 14 Replies
View Related
Dec 2, 2009
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies
View Related
Apr 9, 2012
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
View 6 Replies
View Related
