Email Worksheet Values
Jan 5, 2007
I would like to copy and paste special (values) and give the tab a name (e.g,. “Proposal”) where I’m using the activesheet.copy and then send as an email attachment…?
Sheets("proposal").Select
ActiveSheet.Copy
Set wb = ActiveWorkbook
With wb
.SendMail myemailto, "testEmailAttachment " & Format( Date, "dd/mmm/yy")
.Close False
End With
View 3 Replies
ADVERTISEMENT
Mar 2, 2009
I currently have a button then when pressed automatically sends a summary report taken from the first page of Sheet 1.
Worksheet needs to be protected all the time, but Macro only works on an unprotected worksheet.
I was wondering what additional code and where to put in so that when
protected back again after Macro has been executed?
Here’s the Macro taken from [url]
View 11 Replies
View Related
Sep 9, 2013
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
View 7 Replies
View Related
Mar 23, 2009
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
View 2 Replies
View Related
Oct 26, 2009
So I want to be able to send out a meial of a copy of a wrok sheet from Excel. I wan to be able to send out and orginal (Insert Referral) and then a modified version (out). I got the code working for the out version but when I copy the code and change the names it does not insert the email addresses in the TO: address bar in outlook. the VBA cose is pulling the email adress off of a worksheet depending on who I want each task to goto. I just can not figure out why my second code is not working. Here is the working first code
View 8 Replies
View Related
Jun 18, 2007
I have been trying to find a method to attach a worksheet to an email WITHOUT sending it. I want my user to be able to create the attachment file and then add some text before sending.
also, I have been playing around with Ron Debruin's code to send one worksheet, found at [url] this is the closest i have found to what I need. except it sends the mail for you. and I can't get it to copy and paste as values only one cell on the worksheet (not the entire worksheet as values).
here is his code
Sub Mail_ActiveSheet()
'Working in 97-2007
Dim FileExtStr As String
Dim FileFormatNum As Long
Dim Sourcewb As Workbook
Dim Destwb As Workbook
Dim TempFilePath As String
Dim TempFileName As String
Dim AddresseeName As String
View 9 Replies
View Related
Jun 26, 2014
I have the following code in VB from somewhere. How to modify or adding from the following codes.
(1) Is anyway I can modify sedning out PDF instead of the actual workbook?
(2) Is anyway I just want the range from (A1:G80) instead of the whole sheet for printing (PDF).
View 3 Replies
View Related
Nov 9, 2008
I currently have a workbook that copies the first sheet and emails it to an individual on the first day of the week.
New requirements are for it to be sent to a list of people.
I am at an impasse on how to proceed due to lack of knowledge. The current code obtains the recipient from Sheet3 D4 and i would like to be able to list down this column for additional emails without restricting this to a set number of cells.
I have searched the forum and have been unable to find what i am after.
I have included a test file to show what i have so far.
We use Outlook 2k3
We use Excel 2k3
View 12 Replies
View Related
Nov 6, 2009
I have a spreadsheet that I send emails from. Currently I use the .PrintOut command just before .send and it prints the email to the default printer. Instead of printing to the printer i want to print the email to pdf or any file for archive purposes. I would also like the file to be located on a network drive with a file name from a cell in the spreadsheet with todays date. Is this possible?
Currently the code looks like this:
VB:
With OutMail
.to = sh.Range("A1").Value [code]....
View 9 Replies
View Related
Feb 14, 2013
I need to know how to send an excel worksheet as an xls attachment by email.
View 2 Replies
View Related
Jan 27, 2009
I need a code to be applied to a VB button that will email out a selected worksheet within the workbook, lets say i need to email out sheet5. Is it possible when the button is clicked to bring up my email client, (it's not Outlook) with the file already attached so i just need to add the email address/adresses?
View 9 Replies
View Related
Aug 14, 2012
I am trying to automate a process whereby i receive an email via outlook with a particular subject line every day and i want to copy the body of the email into an existing excel spreadsheet and save it.
It's the first time i've really used vba in outlook, and i have written one to save any attachments which works ok using rules/run a script, but i'm stuck when it comes to copying the body
It would be really useful if when pasting into excel it didn't go all into one cell and just pasted over like if you were performing it manually
View 1 Replies
View Related
Mar 4, 2014
I have been trying to write a couple of macros;
1) save file as pdf, to be saved as filename=(cell in A1 & todays date (format yyyy-mm-dd)) and overwrite any existing file of the same name.
2) Email the pdf to a set of recipients round in Range "A2:A3", and subject = (cell in A1 & todays date (format yyyy-mm-dd))
View 5 Replies
View Related
Jan 28, 2009
I have a VB code that pulls up my Email client and emails out the workbook as an attachment. I would like to change the code so that it just emails out the worksheet i am currently on and not the whole workbook. Can this be done? I have added the code.
Option Explicit ...
View 9 Replies
View Related
Nov 6, 2009
I have a spreadsheet that I send emails from. Currently I use the .PrintOut command just before .send and it prints the email to the default printer. Instead of printing to the printer i want to print the email to pdf or any file for archive purposes. I would also like the file to be located on a network drive with a file name from a cell in the spreadsheet with todays date. Is this possible?
With OutMail
.to = sh.Range("A1").Value
.CC = ""
.BCC = ""
.Subject = sh.Range("H1").Value & " " & sarBody
.HTMLBody = strbody & "<br><br>" & "<H3><B>Specific Notes, If any...</B></H3>" & vbCrLf & varBody & Signature
.PrintOut
.send
End With
View 9 Replies
View Related
Aug 14, 2014
I have the following:
[C1] My dynamic email subject
[C5:C10] My dynamic email body message
My recipient is always same "burak@burak.com"
Now, I need a VBA code, that will automatically open a blank new outlook email window fill the fixed recepient fill the dynamic subject and body of the message from a range in my workbook.
Then just stop there so that I can attach some different files each time and send myself.
View 5 Replies
View Related
Oct 16, 2007
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Target.Count > 1 Then Exit Sub
If Target.Column = 1 Then
If Target = "" Then
Cells(Target.Row, 3).ClearContents
Else: If Target.Value = "test" Then Cells(Target.Row, 3) = my.Email.co.uk
End If
End If
Application.EnableEvents = True
End Sub
Basically, my target column is column A, i have 200 employee numbers, now we have to find the email addresses manually which is useless so i want to spend the time writing some code like:
If the target column is 123456 then the offset column D is email address
If the target column is 654321 then the offset column D value is email address.
I have 200 statements like this ill need to add unless anyone has any suggestions, perhaps select case structure?? I dont really know where to start an so i await your replies.
View 9 Replies
View Related
Mar 2, 2009
putting a macro button on an individual worksheet so the user can click a big easy button and a new email will pop up in Lotus notes with the worksheet attached for them to input the address and then send the worksheet..
I prefer to:
Send individual worksheets only
The ability to input the email address is the new composition email in LOTUS Notes
View 9 Replies
View Related
Jun 20, 2014
I need VBA code to automatically send an email notification when data is added to worksheet. I am not very familiar with writing code and have been using other code from other posts. Ideally I would like it to send an email notification with the added information attached, in this case it would be Row # and Columns A thru O.
View 1 Replies
View Related
Jul 19, 2006
The following code works fine but I need some assistance on how to add values from a textbox per say. How would I go about adding the value of textbox1 to the code below. .HTMLBody = "<HTML><BODY>Job# –<br>Client Acronym –<br>CSR –<br>Kit(s) –<br><br>Comments –<br><br></BODY>" & Signature
View 8 Replies
View Related
Oct 25, 2012
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
View 7 Replies
View Related
Jan 23, 2004
Does anyone know the code to send an email to a set list of six recipients when cells in a certain column in a worksheet reach a certain value greater than another. Let me explain a little - The action to be performed is date-based.
For Example:
When the date cell L2 is 30 days later than the date in K2, send an email with subject containing data from cells B2 and C3.
However, this has to work for columns K and L in their entirety, as both columns contain a list of dates...
View 9 Replies
View Related
Nov 22, 2008
I have emails automatically being sent based on what is entered in the attendance columns, but now I need emails being sent on what is entered in the comments columns. Because the target range changes, I do not know how to combine them.
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A11:A50, F11:F50, K11:K50, P11:P50, A55:A94, F55:F94")) Is Nothing Then Exit Sub
If LCase(Target) = "no" Then Call RouteActiveWorkbook(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
If LCase(Target) = "ex" Then Call RouteActiveWorkbook2(Target.Offset(, 1), Target.Offset(, 2), Target.Offset(, 3))
End Sub
This code results in two macros based on what it entered. Macro 1...........................
View 9 Replies
View Related
Nov 7, 2013
I would like to search an outlook folder for a variable in the subject line and return the date when that email was received. Here is the code i have so far...
Code:
Sub Get_pos()
Set olApp = CreateObject("Outlook.Application")
Dim olNs As Outlook.Namespace
Dim Fldr As Outlook.MAPIFolder
Dim olMail As Variant
Set olApp = New Outlook.Application
[Code] ........
View 2 Replies
View Related
Apr 29, 2014
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
[Code] .....
View 5 Replies
View Related
Jul 23, 2014
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code:
If Range("B" & a) = "Y" Then
If citChev "" Then .Attachments.Add citChev
End If
If Range("C" & a) = "Y" Then
If citMits "" Then .Attachments.Add citMits
End If
If Range("D" & a) = "Y" Then
If citToyo "" Then .Attachments.Add citToyo
End If
If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.
View 2 Replies
View Related
Sep 16, 2013
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
Code:
Sub Email()
Dim rng As Range
Dim OutApp As Object
[Code].....
View 5 Replies
View Related
Jul 3, 2013
I have the below code to email a specific sheet to an email address, however the email stays in the outbox and isn't sent. Is there something missing from the code or is it a setting issue with my email? I'm using Outlook 2010.
[Code]....
View 1 Replies
View Related
Jul 29, 2009
When I test the email link on my computer, the 'Outlook Express setup' wizard initiates. However, I don't use Outlook Express (Yahoo and Zimbra).
I am wondering of it is possible to automatically ensure that in cases where a user doesn't use Outlook Express by default that Excel will open the users default email client- which could be a web browser or another application? Is this something determined by each users (Control Panel?Registry?) settings for handling email hyperlinks? Is there a piece of VBA code I could include in the workbook which identifies the relevant email client to open?
I know I can simply provide my email address on the workbook and allow a user to copy/paste it into their email application but I feel that by minimising the amount of effort required by a user to provide a rating that I'll be more likely to receive user rating feedback.
View 3 Replies
View Related
Mar 2, 2013
I have a spreadsheet which contains 30,000 lines Column A contains an email address. This spreadsheet was merged from several and so I know that there are duplicates in it.
How can I look up column A and if an identical value (email address) is found further down the sheet on another row. Delete that duplicate row?
I'm not concerned that the data may not be identical in other columns. If the email is a duplicate delete the next and all other rows that contain that email address.
View 3 Replies
View Related