Excel 2010 :: Adding Negative Time Values
Mar 16, 2013
I have a problem with adding time values. The idea of my spreadsheet is to count time worked, and then calculate any variance from the normal shift length (i.e. 7h 30m). My formulas work fine until I work less than 7h 30m in a shift.
Example:
A1=start time
A2=end time
A3=IF(A2="","",MOD(A2-A1,1))
A4=IF(A3="","",(A3-(TIME(7,30,0))))
When the duration is over 7h 30m, A4 correctly returns the value of extra minutes. But when the duration is under 7h 30m the return is #####.
PS A1:A2 are formatted in a custom format hh:mm and A3:A4 are formatted as h:mm, and I'm using Win7 & MS Office 2010.
View 5 Replies
ADVERTISEMENT
Apr 24, 2013
EXCEL 2010. I have a column of negative and positive times (eg. -00:52, -03:07, 06:02) in custom hh:mm format, and would like a new column rounding these times to the nearest negative or positive hour (with just the whole hours displayed), so I need a formula that would give me (for this example) -1, -3, 6, etc.
View 9 Replies
View Related
Jan 15, 2014
I'm looking for a formula in column F that will return True if there are any negatives or blanks in E for any of that item A?
False if variance is blank or all off that item has no variance?
Excel 2010
A
B
C
D
E
F
1
item
size
ordered
shipped
variance
formula?
[Code] .....
View 1 Replies
View Related
Aug 25, 2014
Please find the attached MS Excel 2010 file <average set.xlsx>.
There is set of positive set & negative set of values available in the Column A. The values are plotted against Column A in Column B. Light green are positive sets and light yellow are negative sets.
Now I want to calculate the average for the positive set & negative set of values as shown in light majenta in the cells F4:F9. Also all majenta cells to be plotted by formula.
The Column H and Column I also same as like above , but here negative set of numbers starts first.
View 4 Replies
View Related
Jan 19, 2009
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies
View Related
Mar 11, 2014
I am creating a template in Excel 2010 and am having some issues due to a combination of positive and negative values. Specifically, I have a named range of values that can have either a positive or negative deviation from zero. I need to return the value that has the greatest deviation from zero (either + or -) based on criteria in another named range I have used the following array formula with success for the "Y" range:
{=IF(PRB=M1,INDEX(Y,MATCH(MAX(ABS(Y)),ABS(Y),0)),MAX(Y))}
However, if there are not any negative values, as in the "Z" range, it only returns MAX(Z) for the entire range, when I would like ti to return "0.00134" (the largest deviation from zero based on the PRB range criterai. Would this be better accomplished using VBA?
PRB
Y
Z
A90B90
A90B-90
[Code].....
View 3 Replies
View Related
May 3, 2013
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
View 9 Replies
View Related
May 1, 2009
I'll admit that the database I'm currently working on is not a vital on - it's my CD collection but I do use it as a testbed for spreadsheets at work so please bear with me!
I'm trying to add running times of CDs together, but of course can't simply use SUM as it will assume the values are base 10
I've got some extra columns in to separate the minutes and seconds, then for totals to divide the seconds by 60, add the result to the total minutes and finally add the remainder of seconds to this but........
is it possible format a cell so it won't allow erroneous time entries (ie, if I tried to put in 45:65 it would reject it?)
View 9 Replies
View Related
Jan 14, 2013
I have an excel sheet (version 2010) that has a few sections that you can add in names (via drop down box). I also have a spot where i want these names to populate - on a second sheet.
Ex
Truck #1:
1. _____
2. _____
3. _____
4. _____
5.______
Truck #2:
1. _____
2. _____
3. _____
4. _____
5.______
Truck #3
1. _____
2. _____
3. _____
4. _____
5.______
Truck #4
1. _____
2. _____
3. _____
4. _____
5.______
6.______
7.______
8.______
My problem is when I refer to the first worksheet from the second worksheet it shows blanks where there are no names. For example i want the second sheet [ LOC ] to show the names that appear under Truck #1, #2, #3, #4 - but truck #1 may not always have names under it?
Sample Excel file attached - Help.xlsx
View 6 Replies
View Related
Oct 11, 2011
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies
View Related
Apr 7, 2014
Not sure if there is a way to do this. I'm using excel 2010. I used this function
=INDEX(Sheet5!A1:A149,RANDBETWEEN(1,ROWS(Sheet5!A1:A149)))
I have a list on names that is in the range on Sheet5!A1:A149 I'm using the function to randomly select one of those names.
What I want to do: I want to add the randomly generated name to a range that I can then refer to later to see if that name has already come up. So I know if that name has already been used.
View 3 Replies
View Related
Aug 23, 2005
The times listed in column A are formatted as text.
When trying to add them using a simple SUM formula (=SUM(A2:A5)), a false result of 0 is returned.
How can we add text values correctly?
Solution:
Use the SUM and TIMEVALUE functions as shown in the following Array formula:
{=SUM(TIMEVALUE(A2:A5))}
To apply Array formula:
Select the cell, press
View 9 Replies
View Related
Dec 19, 2012
I need to add a colored rectangle or box to a page footer in 2010 Excel.
View 2 Replies
View Related
Mar 17, 2012
I am trying to add columns to my Excel 2010 Pivot Table to calculate % change of sales from year to year. The field name is "Year", while the item columns in the field are 2007, 2008, 2009, 2010, and 2011. How do I add a column between the years that will calculate the % change os sales up or down from the previous year?
View 2 Replies
View Related
Dec 30, 2013
I have a spread sheet which totals the amounts in 2 columns D and E, which are pounds and pence. The formulas for each one are:
Pounds
=SUM(D3:D8)+ROUNDDOWN((SUM(E3:E8)/100),0)
Pence
=MOD(SUM(E3:E8),100)
These work very well and give me the correct figures.
What I would like to do is to add up the values of each row based on the criteria of column C and have just one value in ONE cell (as shown on lines 13 & 14), so for instance:
When added together the values of rows 3,4 & 6 are 7.25 (based on a value of "W")When added together the values of rows 7 & 8 are 5.00 (based on a value of "F")
I have tried to show this as an example in the image below:
A
B
C
D
E
[Code]....
I'm using Excel 2010 on Win 7 Pro.
View 3 Replies
View Related
Jan 12, 2012
Adding items to combobox at run time
Setup office 2007 win xp pro ie8
Further to my post relating to swaping jpgs
The code below scans from the column on the row of the worksheet till it finds a blank, this seems to work ok as I previously had a msgbox in that displayed the value of n once the loop finished
So I was hoping that the values in the columns on that row would be added to the combobox but for some reason I get a typing missmatch error.
Code:
Dim n As Integer
n = 1
Do While LValue6 "" 'find out how many alternatives there are
LValue6 = FoundISBN.Offset(0, 32 + n).Value
n = n + 1
DataInput.ComboBox1(n) = LValue6 - I was hoping that the value in the cell was added to the combobox
Loop
View 4 Replies
View Related
Jan 9, 2014
I have imports with several values listed as :00. I am unable to adjust the import or export to make these values 0:00 as they should for calculating. How can I convert the :00 values to 0:00? Its literally just like I need to add a 0 zero in front of the colon ":". This is the case with anything imported that is less than 1:00 minute. I have :55 that should be 0:55 and so on. I have tried re-formatting for different time values, tried various formulas that were listed in the forums.
View 4 Replies
View Related
Sep 15, 2013
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
View 7 Replies
View Related
Mar 2, 2012
My challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
2012 02 17 11:18:59.050|081,999999999999~999999999999
2012 02 17 11:18:59.550|082,MCTO05222CZ0~999999999999
2012 02 17 11:18:59.566|082,1
2012 02 17 11:19:00.144|083,MCTO05246CK0~999999999999
2012 02 17 11:19:00.160|083,3
View 9 Replies
View Related
Apr 3, 2014
In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.
We created a SQL Server view of this column and other columns of info joined together from several tables.
Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.
Excel 2010 displays each of the columns in our view.
The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.
We want to calculate the average time in this column.
We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.
We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.
We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.
View 1 Replies
View Related
Dec 18, 2013
how to calculate the time between two dates in years and quarters (represented in .25 increments). I would round down on the .25 increments (3 months) if not fully surpassed.
See attachment on what it should look like. C2 is my calculated column.
View 4 Replies
View Related
Jun 2, 2014
The only change I made was to change the "Sheet1" to "Journal" to match the worksheet name in my workbook.
As you close and reopen the workbook, the timer should start with =NOW() in A1 (formatted as "HH:MM:SS") and count up with the current time until you close the workbook.
I use Excel 2010, could that be the problem, that I copied a VBA code for an older version of Excel???
Question: What exactly is a regular module, do I use Module 1 for the first portion of the code or place it in ThisWorkbook?
AUTO TIME UPDATE VBA
PLACE IN REGULAR MODULE
[Code] ....
View 7 Replies
View Related
Nov 23, 2012
In C3 i have a number (1 for this example)
I want this number to dictate that the cells in row 8 return the number up and 1 (c3) over.
What formula could I use to do this?
Excel 2010
B
C
D
E
F
G
H
[Code] ...........
View 6 Replies
View Related
Jul 6, 2014
I've been trying to get a graph that looks like the image below for a while now and can't seem to get it to appear how I want. I am looking to duplicate it exactly, but the issue I'm having is getting the individual bars to be separate and appropriately spaced.
[URL] .....
View 7 Replies
View Related
Jun 19, 2014
I'm doing a study of when people are most productful in their day. I just need to count how many units a person made within say 4 hours of starting work.
My data is similar to the excel I've attached
Count completes.xlsx
I'm using Excel 2010 too.
View 4 Replies
View Related
Jul 9, 2014
Please find the attached 2010 version excel file <For a given date Time Range average .xlsx>.
I want to calculate the average value (Column C) for the given date (Column A) and given time range (Column B).
Values to be plotted in the color cells yellow and light pink / magenta.
Voting Results.xlsx
View 4 Replies
View Related
Aug 16, 2012
I have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".
I'm using Excel 2010 on Windows 7 (64 bit).
HTML Code:
Sub IdentifyGS()
POData.Activate
For CurrentRow = 2 To LastRow
[Code] .......
View 9 Replies
View Related
Mar 13, 2013
I have a 5K Excel 2010 workbook with VBA code that until yesterday, took about 30 sec. to run.
Today, after installation of WIndows7 Home Edition automatic updates, the running time has increased to about 4 min.
View 6 Replies
View Related
Jul 23, 2014
I am trying to take scheduled start time and scheduled duration in h:mm and auto populate the scheduled minutes in the corresponding time blocks.
Example:
Schedule ID
Start Time
Duration
8AM
9AM
10AM
11AM
12PM
1PM
2PM
3PM
4PM
[Code] ....
The first 3 columns are derived from a data table and I am trying to auto populate the minutes scheduled in the time blocks using conditional formatting or some other mechanism.
I'm using Excel 2010
View 4 Replies
View Related
Aug 1, 2014
I am using the following formula on Excel 2010 in conditional formatting
=$D5=VLOOKUP($B5,'Approved Master OLD'!$B:$BC,3,0)=FALSE
However I am trying to apply this to a whole column but the numbers are not (D5,B5) moving down (to D6,B6), When I use the format painter it is taking too long as I can only merge conditional formatting on one cell at a time and I have 30 colums and 390 rows to apply this formatting to.
View 1 Replies
View Related
