In C3 i have a number (1 for this example)
I want this number to dictate that the cells in row 8 return the number up and 1 (c3) over.
What formula could I use to do this?
Excel 2010
B
C
D
E
F
G
H
[Code] ...........
excel formula to keep leading 0's in a cell. ex: "0069" to 0069, "000123" to 000123 and so on.. Attached file for the same.
View 3 Replies View RelatedI'm pasting data from an external source into Excel. The data is in hh:mm:ss format. However, when the source data has zero hours it only displays minutes and seconds preceded by a colon. For example, 5 cells of data in a column might look like this:
:29:28
:31:50
1:15:17
:05:47
1:19:36
I need to run simple calculations on these times, but the cells without an hours value paste into Excel as text format. What are some ways to add a zero before the colon in Excel?
Calculating Lead time (in hours) between two dates/times, excluding holidays and weekend
Start Time
End Time
Lead Time
12/26/2012 15:50
1/2/2013 12:38:00
??????????
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I have a question on how to organize cells from lead sheets that I load inside excel, when it loads it shows as is:
Name, Last, Address, City, State, Zip, Phone #
I need it to be organized so when I print they read:
Name
Address
City, State
Phone#
Instead Of them All together in a landscape view.
I have imports with several values listed as :00. I am unable to adjust the import or export to make these values 0:00 as they should for calculating. How can I convert the :00 values to 0:00? Its literally just like I need to add a 0 zero in front of the colon ":". This is the case with anything imported that is less than 1:00 minute. I have :55 that should be 0:55 and so on. I have tried re-formatting for different time values, tried various formulas that were listed in the forums.
View 4 Replies View RelatedMy challenge is discovering the difference in time between two rows of data that is imported with milliseconds in the time slot. In my example below I would like to see how I can subtract the time listed in line 4 from line 3 (11:18:59.566 - 11:18:59.550). When I try now I get either 1.85185E-07 or 00:00.0 or 0.000000 depending how the cell is formatted.
2012 02 17 11:18:59.050|081,999999999999~999999999999
2012 02 17 11:18:59.550|082,MCTO05222CZ0~999999999999
2012 02 17 11:18:59.566|082,1
2012 02 17 11:19:00.144|083,MCTO05246CK0~999999999999
2012 02 17 11:19:00.160|083,3
In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.
We created a SQL Server view of this column and other columns of info joined together from several tables.
Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.
Excel 2010 displays each of the columns in our view.
The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.
We want to calculate the average time in this column.
We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.
We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.
We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.
how to calculate the time between two dates in years and quarters (represented in .25 increments). I would round down on the .25 increments (3 months) if not fully surpassed.
See attachment on what it should look like. C2 is my calculated column.
The only change I made was to change the "Sheet1" to "Journal" to match the worksheet name in my workbook.
As you close and reopen the workbook, the timer should start with =NOW() in A1 (formatted as "HH:MM:SS") and count up with the current time until you close the workbook.
I use Excel 2010, could that be the problem, that I copied a VBA code for an older version of Excel???
Question: What exactly is a regular module, do I use Module 1 for the first portion of the code or place it in ThisWorkbook?
AUTO TIME UPDATE VBA
PLACE IN REGULAR MODULE
[Code] ....
I have a problem with adding time values. The idea of my spreadsheet is to count time worked, and then calculate any variance from the normal shift length (i.e. 7h 30m). My formulas work fine until I work less than 7h 30m in a shift.
Example:
A1=start time
A2=end time
A3=IF(A2="","",MOD(A2-A1,1))
A4=IF(A3="","",(A3-(TIME(7,30,0))))
When the duration is over 7h 30m, A4 correctly returns the value of extra minutes. But when the duration is under 7h 30m the return is #####.
PS A1:A2 are formatted in a custom format hh:mm and A3:A4 are formatted as h:mm, and I'm using Win7 & MS Office 2010.
I've been trying to get a graph that looks like the image below for a while now and can't seem to get it to appear how I want. I am looking to duplicate it exactly, but the issue I'm having is getting the individual bars to be separate and appropriately spaced.
[URL] .....
I'm doing a study of when people are most productful in their day. I just need to count how many units a person made within say 4 hours of starting work.
My data is similar to the excel I've attached
Count completes.xlsx
I'm using Excel 2010 too.
Please find the attached 2010 version excel file <For a given date Time Range average .xlsx>.
I want to calculate the average value (Column C) for the given date (Column A) and given time range (Column B).
Values to be plotted in the color cells yellow and light pink / magenta.
Voting Results.xlsx
I have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".
I'm using Excel 2010 on Windows 7 (64 bit).
HTML Code:
Sub IdentifyGS()
POData.Activate
For CurrentRow = 2 To LastRow
[Code] .......
I have a 5K Excel 2010 workbook with VBA code that until yesterday, took about 30 sec. to run.
Today, after installation of WIndows7 Home Edition automatic updates, the running time has increased to about 4 min.
EXCEL 2010. I have a column of negative and positive times (eg. -00:52, -03:07, 06:02) in custom hh:mm format, and would like a new column rounding these times to the nearest negative or positive hour (with just the whole hours displayed), so I need a formula that would give me (for this example) -1, -3, 6, etc.
View 9 Replies View RelatedI am trying to take scheduled start time and scheduled duration in h:mm and auto populate the scheduled minutes in the corresponding time blocks.
Example:
Schedule ID
Start Time
Duration
8AM
9AM
10AM
11AM
12PM
1PM
2PM
3PM
4PM
[Code] ....
The first 3 columns are derived from a data table and I am trying to auto populate the minutes scheduled in the time blocks using conditional formatting or some other mechanism.
I'm using Excel 2010
I am using the following formula on Excel 2010 in conditional formatting
=$D5=VLOOKUP($B5,'Approved Master OLD'!$B:$BC,3,0)=FALSE
However I am trying to apply this to a whole column but the numbers are not (D5,B5) moving down (to D6,B6), When I use the format painter it is taking too long as I can only merge conditional formatting on one cell at a time and I have 30 colums and 390 rows to apply this formatting to.
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
I'm having trouble defining the time overlaps on continuous days for the varying results of the runs for my simulation.
For the following data set, without counting overlaps there are 18 total spare requirements, but if I take into account their overlaps in their duration there should be a total of 11 per day. For example in row 4 this event overlapped in the same day with the event of row 5 so both had only 2 overlaps as a result (So there is not possible to be 1 as an answer for overlap, there is only from 2 to "n" amount or 0).
But if an event overlaps with more than one in their duration the result would be their maximum overlap during this time frame.
So then I have for each event an Starting date, starting time, duration, ending date and ending duration.And for each day I would need the total amount of overlaps occurred for the duration of each event and from those I would take their maximum amount of overlaps occurred per day. To obtain their real requirement as shown on the file.
The manual procedure I'm using looks like this for the first day: (Graphical representation)
Event 1 occurs from 17:02 to 20:29 and only overlaps with Event 3, so it's 2
Event 2 occurs from 20:38 to 23:38, also only overlaps with Event 3, then its also a 2
For Event 3 in its whole duration only overlapped with Even 1 and Event 2, one at a time so its maximum overlaps where only 2.
And that's what I'm using so far to determine these amounts but since is a simulation, I would end up with several data from each run and this method would be too long. That's why I would need this template to paste data for each run (15 days) and obtain my results faster.
I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
I’m working on a project using Microsoft Excel 2010 and I want to add some features to facilitate saving and retrieving files process.
1.How can I save the daily created workbooks (Assume 15 files a day) in order to contain the current date (and time if possible) linked with certain cell(s) I have at my workbook forming the file name? (XYZ 2-4-2014) and/or (ABC 2-4-2014 23:11) and so on …
2.I’ve been through some other posts and I found VB code which saves the active file into specific path, but it is only useful for single workbook because multiple files are getting overwritten automatically. Is there a code which allows multiple/different files saving & creates daily folders?
I am trying to add a calendar picker to Excel 2010. Everything I read online says that it is possible, you just need to use the ActiveX control "Microsoft Date and Time Picker Control 6.0", and that it should be listed under Developer Tab -> Insert -> More Controls ->... But it's not listed.
I also tried downloading the Microsoft Windows Common Controls-2 6.0, but when I tried to add it to Excel using "Register Custom...", it says "Cannot register this control".
Why this control is missing? and I can't add it?
I'm a fan of the Excel 2010 table styles, but can't figure one thing out. When I create a table in excel (Ctrl+T), I like to reformat it with a new defined style. When I save the style, I can use it while I'm in that instance of excel, but when I close and reopen excel, the style is gone. How to save the custom formats to they are always available?
View 3 Replies View RelatedI was trying to use this guide to add a date picker in:
[URL]
and noticed that the date picker does not appear in my active x controls list.
I am definitely on Excel 2010 so it should be there right?
I'm using excel 2010 on a pc. I need to create a calender. So far I have been using the tutorial for the pop up calender. The result I'm looking for is to set up a specific time frame and have the calender provide the "due" date. I would like the due date to exclude weekends and holidays. Would I be able to do this with the pop up calender?
View 3 Replies View RelatedI am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
So i've been trying to do this invoice/inventory/client , I couldn't find a way to somehow register the whole invoice as it is, so i can later print/visualize it if i lost the copy or something.
It would be best if it just stayed stored in a variable and not always visible, and only appeared if i wanted to check/print it.
The whole invoice would be from A1 to F30
Excel 2010 btw