Excel 2010 :: Msg Box With Ok And Cancel Buttons

Oct 3, 2012

I'm trying to make a msg box with ok and cancel buttons. The cancel button should continue the macro, the ok button ends the macro. I'm new to making message boxes.

I keep getting a compile error and it says it expects =

Here's what I have so far:

Code:
If WorksheetFunction.CountBlank(Intersect(Columns("I"), ActiveSheet.ListObjects(1).Range)) Then
MsgBox(Prompt:="Enter a status, moron. Click Ok to return and add a status, click Cancel to throw caution to the wind and continue",buttons:=vbOKCancel, title:="blank status")
End If
If Answer = vbOK Then Exit Sub
End If

I also don't know if my End Ifs are in the right places. I haven't been able to test my code because I keep getting this compile error.

Excel 2010

View 3 Replies


ADVERTISEMENT

Rename Buttons For Yes No Cancel VBA

Feb 2, 2009

Here is my
Private Sub Workbook_Open()
Select Case MsgBox("my question?", vbYesNoCancel)
Case Is = vbYes
'Yes Code will sort Moistures and Owners
Case Is = vbNo
'NO code will sort Moistures and Fields
Case Is = vbCancel
' Will Sort neither and allow for data entry
Case Else
Debug.Print "Whoops"
End Select
End Sub

I want to rename the Yes, no, and cancel buttons to Pay Owner, Field Close Out, and Data entry.

View 9 Replies View Related

Excel 2010 :: Command Buttons Disappear

May 16, 2011

I'm using excel 2010. I have a spreadsheet with a row that is hidden. One cell in this row contains a button. I have a macro that copies this hidden row, inserts it at another point on the spreadsheet and unhides it. It works great in excel 2007, but the button on the hidden row disappears when I close the sheet and re-open it.

View 7 Replies View Related

Excel 2010 :: Extracting Information From Multiple Form Control Dropdown Buttons

Aug 23, 2013

My problem is I cannot copy from a Form Control drop down box, and I need to do this for ~10 drop down boxes in about 200 xls files. The files follow a template so the drop down button Inputs are uniform. Here is some more detail:

I’m building an Access Database so that our data (currently in many, many Excel Spreadsheets) can be efficiently queried. The old system was that when asset data was collected, the data would be entered into an Excel spreadsheet, using a Template. So for example:

Project A1234

Name
Main Street Pipe
High Street Pipe

Ref No.
12345
12346

Installation date
22/08/13
19/07/12

X Coordinate
55667
99212

Y Coordinate
77889
12364

We have hundreds of these files, but I managed to get all the files in one folder and Paste and Transpose the data from the relevant Cell Ranges in each file (using a VB sub) into ONE summary sheet. Success; or so I thought.

Unfortunately for one generation of the template (people changed them slightly every year), the template had people enter information into Drop Down Menus. Not a problem when they’re associated with a cell, but these were free floating Form Controls.. so you can’t actually click and copy from them, or call them in VB as you would a specific cell.. afaik.

So my issue is how can I extract the data from those Form Buttons? I’ll try and provide as much info as I can:

Firstly I tried to find some sort of identifier for each Form Button. The dropdowns are called Combo Boxes, (Developer tab > Insert > Combo Box (Form Control) ), and when you select them (by right clicking) and hit the View Code button in Developer Tab > Controls the following shows up in VB.

Sub DropDown44_Change()

End Sub

I’m guessing that the number is related to the button so that’s one useful thing, an identifier of sorts. There’s no actual code there though really from what I can see.. My problem is I have no idea how to extract from DropDown44!

The range of values in the drop down comes from a separate sheet where there’s just a list of the values. There aren’t any cells linked to the drop downs though. If I enter a cell in (Right Click) Format Control > Cell link: then it prints the number (e.g. 4) of the value in the range. So if the drop down options are “Monday”, “Tuesday”, “Wednesday”, “Thursday” and “Thursday” is selected, the linked cell says: “4”.

They didn’t link a cell, then I could call that cell in a VB sub and the job would be done. Unfortunately they didn’t, so I tried Recording a Macro and selecting the drop down form control.. That didn’t really work, except if I right clicked it, I got some more info from the macro VB:

ActiveSheet.Shapes.Range(Array("Drop Down 19")).Select

So is my drop down an Array? My understanding of an Array is that it’s a list of arguments.. all I get there is the name of the button. I am not experienced in VB so this is as far as I’ve got. Perhaps I can get a sub to select the button using the above line, but I need the info from it, i.e. which value is currently selected in the Drop Down.

(Using Excel 2010 but the .xls files are from ~2005)

View 1 Replies View Related

Excel 2010 :: Getting Outlook Warning (2010) While Sending Email Through Macro

Mar 25, 2014

I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.

View 6 Replies View Related

Excel 2013 :: Add In Buttons On The Ribbon?

Jun 24, 2014

I installed excel 2013, but I don't find the (VBA) buttons on the ribbon, since.

Is there a need to install an add in / or activate an add in?

The macro's are on the ribbon on the tab VIEW.

I expect to find the buttons on that place also.

View 3 Replies View Related

Excel - Adding Radio Buttons / Checkboxes

Apr 3, 2014

I was viewing this thread here: [URL] ...

How to add checkboxes and radio buttons.

View 8 Replies View Related

Excel 2007 :: Preventing Adding Buttons?

Nov 1, 2011

I have an Excel 2007 template which is used for data entry. I want to disable cut, copy and paste functionality and have disabled shortcut keys via VBA and used CustomUI to leave a bare ribbon. However, a user can still add cut, copy and paste buttons to their quick access menu. Any way to prevent this?

View 3 Replies View Related

Assigning Macros To Command Buttons In Excel?

Aug 14, 2012

I have written a piece of VBA code which I want to assign to a button in the front end of excel, however once I assign it and then press the button to run the macro (which works) I am not able to then press it again incase I need to re run it?

View 7 Replies View Related

Excel 2007 :: Macro Buttons No Longer Linked?

Apr 12, 2012

I have a workbook created in Excel2003 as an xls with a nuumber of buttons to call macros. I converted it to an xlsm in Excel2007 and now get the message "((#Ref.xls could not be found..." whenever I click any of the macro buttons. Event code in the individual worksheets works fine.

View 6 Replies View Related

Multiple Macro Buttons (radio Buttons)?

Feb 10, 2012

I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.

Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.

While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.

Is there a quicker way?

View 6 Replies View Related

Change The Color Of Buttons Or Command Buttons

Mar 14, 2007

Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.

I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.

View 9 Replies View Related

Excel 2003 :: Macro That Clears Option Buttons Made With The Control Toolbox?

Sep 26, 2013

I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.

View 14 Replies View Related

Excel 2010 :: How To Save Excel File As Cell Reference Using Macro

Mar 5, 2012

I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)

Sub aaa()
'
' aaa Macro
'

[Code].....

View 1 Replies View Related

Excel 2010 :: Macro To Change Excel Formatted Table Name Dependent On Number Of Loops

Jul 9, 2012

Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).

I am using excel for windows 2010. The macro that i have so far is below.

Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value

[Code] ........

View 1 Replies View Related

Adjust Macro From Excel 2003 To Excel 2010?

Apr 1, 2014

I am trying to adjust the below macro so that it will work in Excel 2010.

Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer

[Code]....

View 3 Replies View Related

Excel 2013 :: CF With 2 Option Buttons / Multiple Option Groups?

Sep 6, 2013

I have several option groups (Y & N in each) linked to cells to display TRUE / FALSE depending on which option is selected in each group. I have another cell which I want to apply conditional formatting to if EITHER Y or N is selected in all groups. At present I use COUNTIF to check for FALSE=0 in the linked cells which works if all the answers are Y. How do I apply CF if there is a mixture of Y & N (TRUE / FALSE) in all groups (I'm not sure if I've explained that well or not).

Excel 2013

View 1 Replies View Related

Not Allow Cancel On Save As

Oct 29, 2007

How can I disable the cancel button when the user is prompted to do a "save as"? I need to force the user to name the file and save it to the appropriate file - if they are allowed to cancel I run into problems with my macro.

View 12 Replies View Related

Msgbox Vb OK Cancel

Jul 27, 2007

I've created a routine that starts with a message box saying the following:

"Please Confirm 'DTmacTest.xls' is the ONLY open Excel workbook"

So I have an "OK" button and a "Cancel" button.

but no matter which one I press, it runs the routine.

How do I assign the cancel button to stop the routine when it's pressed?

View 9 Replies View Related

Vb Ok Cancel Code

Oct 2, 2009

In my userform I got different comboboxes and one checkbox.

I added a vbOkCancel to my checkbox but for some reason when I click on ok it does not close the userform and therefor not write it into my worksheet.

Can you please tell me what I have to change so it would work again.

The code is below.

Private Sub cmdOk_Click()
Dim RowCount As Long
Dim ctl As Control
Dim Stunden As Double

I highlighted the chxbox event so you can see it better.

View 9 Replies View Related

Cancel Through XlDialog

Jun 8, 2007

In the below mentioned code, there is some problems which need to be modified.

Sub printall()
Dim wsAtt As Worksheet
Dim wsPay As Worksheet
Dim rng As Range
Dim cl As Range

Application.Dialogs(xlDialogPrinterSetup).Show

On Error Goto PrintAll_Error
Application. ScreenUpdating = False
Set wsAtt = ThisWorkbook.Worksheets("Register")
wsAtt.Select
Set rng = wsAtt.Range(Cells(8, 1), Cells(Rows.Count, 1).End(xlUp))
Set wsPay = ThisWorkbook.Worksheets("Payslips")

when the code is run, a window for selecting printer pops up and if the user clicks OK button, it starts printing but the problem is that if the user clicks "Cancel", also it starts printing.

I want that if the user cliks "Cancel" it shuold not start printing & the Select Printer screen should vanish and return to the sheet from where tehe user has run the code.

The code was provided to me in response to my post earlier at this forum However the code line related to select printer is put by me.

View 6 Replies View Related

Input Box And Cancel Button

May 22, 2014

By clicking the print-button the user may select the area to be printed.

But if I click the Cancel button, or the upper right X, the print message is sent to the printer, even it shouldn't.

How do I write the code for cancelling the print when clicking the cancel button?

Please see the VBA editor in the attached file.

A last question: is it necessary to declare the variable?

View 4 Replies View Related

Save Dialog Box Cancel

Jun 19, 2009

How can this be edited so when the savebox comes up when i hit save it saves the file but when i hit cancel it goes to error:

View 14 Replies View Related

Tidy Way To Exit Sub On Cancel

Jul 18, 2009

I have an input box which has OK and cancel buttons If the user clicks cancel I would like to routine to end, which I can do with exit sub. However this particular sub routine has been called from another so the rest of the code continues. Is there a way of exiting all the routines on cancel -- or a neater way than exit sub ?

View 4 Replies View Related

Cancel A Message Box Pop Up Action

Aug 13, 2009

If I press either the "OK" or "Cancel" button without entering any states in (because I changed my mind and want ALL states in there, or I pressed either button by accident), the macro eliminates ALL the rows because it needs criteria.

Can this code be modified so that the message box does the following...

1. If I press the "OK" button but I haven't entered in any criteria in the message box, bring up another message box saying "you have not entered in any states in" which brings up an "OK" box and brings you back to the original message box.

2. If I hit the "Cancel" button, bring up a message box that says "No states will be removed" with an "OK" button, essentially cancelling the "State" macro portion of the sub, but continuing with the rest of the code in the sub if there is any.

I would like to have this message box work this way even if states were entered in the input box but the user pressed the "Cancel" button anyway.

3. Create a NEW button named "Keep ALL States" which essentially does the same thing as the "Cancel" button. (I'm trying to "idiot proof" this).

View 4 Replies View Related

Selecting Cancel Gives Me FALSE

Aug 14, 2009

i have a code that i am using but however when I click on the cancel it is giving me a false in the cell when all I am want is to cancel and leave the information in the cell. Here is an example of the code i am using.

View 4 Replies View Related

VBA Code To Cancel Printing

Nov 7, 2007

I have a code that prepares my spreadsheet and then prints out around 6 different sheets when all is said and done. The prints are not together in the code. I was wondering if there is something that I can add at the beginning of the code to ask the user IF they want a Printout. If they answer Yes then they get printouts of the 6 or so sheets and if they answer No then the code will run but no printouts occur???

I have play3ed around a bit and implemented the following in one of my codes but this one only has 1 sheet that prints out.

'Checks to see if this is a corrected Deposit in which case Depositor probably has a Verification sheet already printed

If Sheets("Input Sheet").CheckBox5 = True Then

Answer = MsgBox("It's seems that this Verification sheet was already printed once. Do the Corrections you have made require you to print another one?" & vbCr & vbCr & "If you reuire the Verification sheet to print again the please click YES otherwise click No.", vbYesNo, "PRINT Out Required???")

If Answer = vbYes Then

Rows("16:275").Select
ActiveSheet.Unprotect "unlock"
Selection.AutoFilter
ActiveWindow.ScrollColumn = 1.........

View 9 Replies View Related

Cancel Button In Text Box

Feb 19, 2008

Msg = "Enter a number"
BOXTITLE = "Number"
ANS = InputBox(Msg, BOXTITLE)

This generates 2 buttons. If i click the cancel button how would i direct the code to go to a certain line in my code. EG if cancel button clicked then goto 10

View 9 Replies View Related

Test For InputBox 'Cancel'

Jan 19, 2003

After an InputBox statement, how do I test to see if user pressed "Cancel" and if so, exit the Sub?

View 9 Replies View Related

Disable Esc Key And Cancel Button

Feb 20, 2010

I would like some help on disabling the Esc key in a macro and to disable the Cancel button and X on message and input boxes.

My macro is to insert rows in a protected worksheet and another to run a spellcheck, if my users hit any of the above keys during the macro my worksheet is left unprotected and formulas could be deleted in error. I have pasted a copy of my code below,

Sub InsertRowAboveCopyFormulas()
ActiveSheet.Unprotect ("password")
Dim Rng, n As Long, k As Long
Application.ScreenUpdating = False
Rng = InputBox("Enter number of rows required.")
If Rng = "" Then Exit Sub
On Error Resume Next
ActiveCell.EntireRow.Select
Selection.Resize(rowsize:=Rng).Rows(1).EntireRow. _
Resize(rowsize:=Rng).Insert Shift:=xlUp
Selection.Offset(Rng).AutoFill Selection.Resize( _
rowsize:=Rng + 1), xlFill
Selection.Resize(Rng).EntireRow. _
SpecialCells(xlConstants).ClearContents
ActiveSheet.Protect ("password")
End Sub

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved