nrel25mar.xls
I have attached Excel sheet as above. I wanted to plot graph time vs pic-zenith,pic-azimuth,pic-elevation .
I tried to plot graph but value of point in excel sheet is differ from table value. For single graph no problem,When all put together leading some problem. What kind of char can plotted above reading values.
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
View 4 Replies View RelatedI use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedWe have a special testing machine in the lab I work in, and it measures reflectivity from reflective vests etc. A special instrument takes a reflective reading and reports back a X and Y value which is used then as a co-ordinate and gets plotted on a graph.
The machine measures for 8 colours, and takes four readings, so for example the first color will be Flourescent Yellow. and then it produces 4 "X,Y" readings, which get plotted onto a graph, and joins all 4 points to create a box as shown in the link >> Graph with joined plots
This is a small capture of the spreadsheet with the values >> spreadsheet
Basically, I need to know how to take the values in columns X and Y, and then make it plot onto a graph as one point, and then join the four points for that one colour,
end result being the grapgh will have upto 8 boxes on it.
There is probably a really simple solution to this, but I have a column 'A' of data, with various numbers, and a column of data 'B' with letters from A to Z. However when I try and plot this on a scatter graph, the x axis uses numbers rather than letters, with data points all over the place?? I'd like the X axis to have the letters A to Z, and the data to stack up vertically when there is a few different numbers correpdoing to 1 letter. Specifically, a scatter graph
View 3 Replies View RelatedI've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
How can i exclude Blank or cells that have a 0 when plotting my graph? Right now everything is very small because i have about 50 cells, some with quantities and some with zero quantities.
View 9 Replies View RelatedI'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
View 1 Replies View RelatedExcel Version : MS Excel 2010
Attachment filename : <Forum to plot the values.xls>
My requirement is i want to plot the values V1, V2, V3 and V4 from the given condition (A1 / A2 / A3 / A4) and the given date.
If the given date is not available then the formula should take the older date than it not next date. For example if the given date is 10-Mar-14 and the date is not available for the given condition then it should take the older / earlier dates like 09-Mar-14 or 08-Mar-14 like and it should not take 11-Mar-14, 12-Mar-14.
The values should be plotted in the yellow cells.
Plotting of bar and line graphs given an arrays of x and y values in VBA? I want to plot the rDateRange and rOEERange.
Code:
Dim rInitialDate As Range, rFinalDate As Range, rDateRange As Range, Calculation As Worksheet
With Worksheets("Calculation")
Set rInitialDate = .UsedRange.Find(What:=DateValue(InitialDate), After:=.Cells(1, 4), LookIn:=xlFormulas, LookAt:=xlWhole, SearchDirection:=xlNext, SearchFormat:=False)
[Code] .........
I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
View 6 Replies View RelatedThis was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedI was wondering, if I can extract data out of a excel graph what is been paste into word document and send to me, without the excel data sheet.
So I want to get data out of more then one graphs that are paste into word. and i want to do this in a fast way. In order to create a datasheets.
I am trying to graph the amount of calls that come in on each day and at what hour. I am trying to put the days of the month along the x axis and hours along the y axis. I then want the number of calls to show as a scatter at certain times on each day. Is this possible? I have attached a sample of a table I will be working with that has made up data on it. I have tried using the select data function to try and change the axis, but I do not think I am writing the correct things in.
View 4 Replies View RelatedI have two issues with an excel graph to automate it.
My first problem is that I have to manually select the source data when the data changes inside my spreadsheet. I have 35 slots that represent a 5 week period. Because the first day of the month does not always start on the first day of the week, I have to allow the extra 5 slots in my template. I have the cells set to show blank when there is no data entered in certain cells. Therefore, only days that the machine is up gets put into the 35 cell table. When I do this, the blank cells show up as 0 on the graph and it skews the line. I need some solution that will allow me to tell the graph to ignore zeros.
The second issue is the title in my graph. I have a set title, but need it to pull "Month Year" and "c81" from the worksheet it is on. I cannot seem to get it to populate automatically in the label. I would like it to look like the following:
614 Machine Uptime Percentage
%Month Year%
MTD PCT (%c81%)
where the %name% is the automatically populated item. I don't necessarily have a problem with hiding a cell and linking the label to that cell inside the graph, but I need it to change those two items automatically.
Im certain that a resolution to both of these items exist and I am certain it is an easy thing that I will be kicking myself in the rear over once I find out the resolution, but I need to get this done and im tired of wasting time. I hope this makes sense. If you need me to post an excel file as an example, I will be more than happy to.
I am having a graph in ppt which should be updated with a data i have.. i started lyk
Code:
Set xlsApp = CreateObject("Excel.Application")
xlsApp.Visible = True
Dim path As String
path = "C:MydocumentsBook1.xls"
Set newxls = xlsApp.Workbooks.Open(path)
Worksheets(sheet3).Activate
I donno how to update it using vba code in ppt .
I've got a workbook that was written in excel 2003. It has been modified in excel 2010 and a graph has been added. Everything looks normal in excel 2010 and 2003 but when opened in excel 2007 the graph is not visible. Printing the sheet has the graph on it, so it is there, but how can I get it to show on screen? I've checked the print property in case that had anything to do with it but it is set to true.
View 2 Replies View RelatedI have a set of data (numbers) I want to include in a bar chart. The numbers appear fine in the table. When I create the chart and sets the data (the cells excel goes looking in to create the chart), the values in the cells are divided by 10 for some reason I can't understand.
I tried to create a new file and a new chart, and the issue does not repeat.
I do not know where to look in that specific file to prevent Excel from dividing every number by 10 when I create a chart.
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies View Relatedi have some numbers as data, i want to find the function that generate thiese numbers and also i want to view the chart of it, its kind of sine wave graph.
View 9 Replies View RelatedWhat I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("A:A")) Is Nothing Then _
Target.Offset(0, 14).Value = Now
End If
End Sub
What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.
Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.
I am using Office 2007.
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
did in [URL] but my issue is complicated by not knowing what cell I need to move the graph to.
I am using Excel 2010 and I am a realitive novice at writing VBA code.
In My spreadsheet, I have a list of properties and some related cost info. From week to week, the number of properties varies. Some days I will have 6 properties and others I could have 100. Because of this, I need to make all of my references relative to other cells. I am having trouble repositioning the graphs that I have created from the data to be 2 cells below the label I have created for the graph (which is a merged cell covering Columns B:I on a row 3 rows below the last property in the report.
So far, I have:
Dim r1 As Range, r2 As Range, GraphRange As Range
Cells(2, 1).Select
Selection.End(xlDown).Select
[Code]....
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedExcel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
Attached File : Graphs.xlsx
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
how do I plot the axis data in my graph in an increasing order, when I have my datas in a random order?
In other words, I have bunch of data to be plotted as my x-axis. All numbers are within [0;1], but they all in a random order, like (0.001, 0.923, 0.120, ...). And I want them to be in an increasing order.