Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
I want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
View 6 Replies View RelatedI have a database where I would like to plot graphs from data of different periods and different series.
My current method is to go to the data set formulas and changing data range. The tricky part is that I might skip data series because I am selecting the series required for each chart.
How to do plot the different graphs efficiently and quickly.
I'm trying to make a scatter plot from two columns of data; the first, a series of decimals between 0 and 1, the second, a series of percentages between -40 and 140%. Essentially, I'm charting a performance (%) vs. a 'batting average' (decimal between 0 and 1).
However, when I plot these data points, the x-values the chart takes are, I suppose, the relative position of the data within the column (i.e., 5, 9, 32) as opposed to the actual values (.33, .71, .92, etc). I've tried manually selecting the data, copying only the values into different cells...nothing seems to work. Each time, I get points like (11, 61%) instead of the desired (.48, 61%).
I have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies View RelatedMy chart with dynamic ranges still plots empty ranges despite using the following for empty cells:
Use of NA()
Use of #NA
Use of ""
Use of 0
What else am I missing?
I have 3 different series: S, J, and D. Each series has a list of different dates, and I need to plot the results for each date, while comparing the 3 series. I have created 3 different charts to display the results for each series - list of dates. However, I'd really like to chart all 3 series on one chart, so that you can see how the 3 compare.
I believe my obstacle is that the list of dates are not consistent between the 3. I tried to get around this by creating one table with all the dates, and leaving blanks where necessary (on Sheet 2). However, this created a problem because the blanks showed on the charts as 0s.
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
How do I plot the projected increase on an existing chart column ...
View 9 Replies View RelatedIs there a way to plot the grand total from a pivot table on the pivot chart?
View 9 Replies View RelatedI have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies View Relatedi am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies View RelatedI'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
View 1 Replies View RelatedI am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
This was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedIs there a way to plot a function, for example y = a + x*b or y = e^x in a graph without it having x and y values in cells of the spreadsheet?
That is, in y = a + x*b, for example, what I'd like to do is have an input cell for a and b, but no cells that show a value of y for every corresponding value of x , and a graph on a chart showing what the function looks like. Thus, the graph would only rely on inputs of a and b and on nothing else. A program called MathCAD does this, but I'm not sure how to do this in excel.
I've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
View 4 Replies View RelatedExcel Version : MS Excel 2010
Attachment filename : <Forum to plot the values.xls>
My requirement is i want to plot the values V1, V2, V3 and V4 from the given condition (A1 / A2 / A3 / A4) and the given date.
If the given date is not available then the formula should take the older date than it not next date. For example if the given date is 10-Mar-14 and the date is not available for the given condition then it should take the older / earlier dates like 09-Mar-14 or 08-Mar-14 like and it should not take 11-Mar-14, 12-Mar-14.
The values should be plotted in the yellow cells.
Plotting of bar and line graphs given an arrays of x and y values in VBA? I want to plot the rDateRange and rOEERange.
Code:
Dim rInitialDate As Range, rFinalDate As Range, rDateRange As Range, Calculation As Worksheet
With Worksheets("Calculation")
Set rInitialDate = .UsedRange.Find(What:=DateValue(InitialDate), After:=.Cells(1, 4), LookIn:=xlFormulas, LookAt:=xlWhole, SearchDirection:=xlNext, SearchFormat:=False)
[Code] .........
how do I plot the axis data in my graph in an increasing order, when I have my datas in a random order?
In other words, I have bunch of data to be plotted as my x-axis. All numbers are within [0;1], but they all in a random order, like (0.001, 0.923, 0.120, ...). And I want them to be in an increasing order.
In the attached document is a timeline made from a scatter chart. Error bars using custom values are used to show the length of each task, however I can't get the chart to include error bars for the last 2 data points (tasks).
View 1 Replies View RelatedI have a data for sedimentation along a pipe. I measured sediment concentrations at different lengths of the pipe, after different intervals of time. So I have 35 concentration values, take at 5 different points along the pipe, at 7 different times. Is it possible to plot a chart with these 35 points, with depth on y-axis, time on x-axis? These 35 points are percent removals (0-100). .
View 4 Replies View RelatedI have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies View RelatedI am currently building a tool that works with an undefined range of input variables, e.g. I now have a range of 200 values but it could just as easily be 400 or 100. I am using these values for further calculations and have thus 'dragged down' to cells that in some instances are empty, resulting in values that are 0. I'm also building a chart based on these values, but it shows the values that are 0 as well!
Is there any way to just plot the non-zero values without changing the data range?
I have a Column Graph that will be changing automatically as the data is changed. My problem is that for one set of data the chart looks fine....but if a number becomes negative the bar will overlap with the data labels at the bottom and cause it to be unreadable. I am not able to resize the x axis area or move the labels down any. Is there anyway to make the labels adjust automatically?
View 3 Replies View RelatedI have a chart that shows up to a list of 28 people and the number of sales for that day. I'm try to make the chart only show the names and number of salesperson that are not = to null. This is what the chart has for values right now "=' Nest Average'!$C$6:$C$33". How can I make it so that it only shows those cells if not = to null.
View 2 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View Related I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.