Apply A Filter Alert To "button"
Nov 10, 2009
I have 5 columns with an auto filter applied using the code below. I also have a form button in each column to reset the filter. What I would like is to have the form button turn "red' when the filter is applied and return to the orginal color when the filter is removed.
If it takes something other than a "form" button that is fine. I am looking for 2 "buttons" one to apply the filter, the other to alert you that the filter has been applied and to reset the filter when clicked.
View 5 Replies
ADVERTISEMENT
Jan 17, 2014
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
View 3 Replies
View Related
Apr 20, 2007
I have several linked files to a master excel document that uses filters.
Unfortunately, if I dont remember everytime to turn off the filter before I exit the file, the other files read data incorrectly.
I could set up an alert/notification that tells me these filters are still on before I exit the file?
View 4 Replies
View Related
Mar 26, 2013
I have some columns on which I have a filter, with some columns next to those that have information in them.
What I need to do is filter only columns A-F when apply filter values, but keep columns I-K fixed as A-F change when they are filtered..
View 1 Replies
View Related
Nov 2, 2006
I've created a Macro in Excel that takes the value from the selected cell and filters an Access DB for that appropriate record.
I'd like to modify the button so that if the cell does not contain content that begins with "DR-" the button is greyed out or inactive so that it cannot be selected until a cell with the proper content is selected.
View 8 Replies
View Related
Nov 25, 2008
I have a chart that's being updated with different values when I cklick on different radiobuttons. When the cells that the radio button refers to is empty or the calculation in the cell have an error it pops up a message that I need to click OK to go on. Is there a way to stop these alerts by writing a script that shuts the alert messages off during each click?
View 2 Replies
View Related
Dec 7, 2008
I just discovered VBA coding today and was wondering if I could use it as an audio alert. I found a couple examples online but don’t understand the coding language of excel. I have a feed link from my trading platform to excel that feeds in live data. What I would like to do is have an alert for when Range ("C4").select is >=1000 Alert Ring.wav and when Range ("C4").select is <=-1000 Alert Chimes.wav.
View 5 Replies
View Related
Dec 16, 2013
I might use the filter as a selection from a combobox, or I might honestly wish to create 15 separate charts.
I have a spreadsheet. Three columns out of maybe six in immediate interest: Date, Name and score.
In "name" I have about 15 different students. I wish to create a chart that will extract the data for one of them which I would select - on the vertical ("y") axis have the scores (from "score") which range in whole numbers from 1 to 9, and on the horizontal ("x") axis show the dates (from "Date") of each score.
Complicating my thinking is the fact that a date can have more than one score, but seldom more than three.
I would then want to add a trend line through the graph, which, if I recall, is fairly easy to do.
I am wondering if I might at some point need to control the length of history, for though now I am working with about three months and over that period of time no one has more than 18 total scores.
View 3 Replies
View Related
Oct 12, 2009
I have a spreadsheet where users will filter it using autofilter. I then have two cells where the val/volume of each account is totalled, this works fine. However I would also like to be able to say which is the most recurring product within the account and how many times it occurs. I have attached my sheet below, I hope this helps. Eg, Account 1 worst product is..... with a volume of...
View 5 Replies
View Related
Jan 28, 2014
Well we are trying to fetch some data using excel filters. But we are unable to apply filter simultaneously on two excel columns. The problem is explained in the attached sheet. If you have any query/doubt in understanding the whole problem then writ it.
View 5 Replies
View Related
Aug 27, 2008
I have some auto Filters I need to apply to my data,
I have a file with supplier and description columns and i need to apply around 15-20 autofilters and move the corresponding data/ results to a different worksheet (which has the same headers but already has data - so want to move it to the bottom of the list) in the same workbook.
I was wondering If you would guide me on the If statements so that I could create a macro that works?
View 9 Replies
View Related
Oct 5, 2013
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
View 2 Replies
View Related
Mar 27, 2013
I have a problem that I'm sure requires the most elementary fix. I have exhausted google on this. All I need is a drop down list for each value field. See picture attached.
View 1 Replies
View Related
Dec 10, 2012
I want to use the content of a specific cell in one worksheet to be used to form the filter criteria on a set of data in another worksheet, both sheets are in the same workbook
View 1 Replies
View Related
May 15, 2009
I have created a post on TeachExcel.com, but haven't received an answer yet:
http://www.teachexcel.com/forum/view...7d85cfb7d#p203. I've attached an example of the spreadsheet.
View 5 Replies
View Related
Apr 26, 2008
Setting up all 50 states was not so bad, and I tried a Pivot Table but I have very little experience with them and could not figure out how to show only the nonzero states. So, I looked up how to filter the pivot table and discovered I could just filter the state data without the pivot table.
So, I put all 50 state abbreviations in one column. In the next column I put countif formulas to count how many customers came from each state. (In the meantime, I learned how to use an indirect formula to pull the state ID from the first column and copy it down and have the formula advance for each row... cool!) Then, I filtered the columns on the count twice. First, in descending order; then, without the zeros.
However, the weak side of the filter is that it does not automatically update when a new state is entered. I have to go and manually filter again. So, is there a way to get the filter to update dynamically? I know that a pivot table is dynamic but I have a lot to learn and I can probably browse around and figure out how to show only the nonzero states. Once I learned that, would it dynamically update when a new state is added?
View 2 Replies
View Related
Aug 5, 2008
I find it to be a little irritating that I have to remove the autofilter, then reapply it whenever I start entering data into a new column. I want a macro that I can assign to a button so all I need to do is hightlight the range of cells I want to apply the autofilter to, and click the button.
View 2 Replies
View Related
Mar 27, 2007
Each month I get a report that I process using a macro. The problem is that each month the name of the file changes and is different. When I run the macro and it crashes I have to de-bug by going through the code to change all references to the file name from the the previos run and change to the latest file name and then re-run the macro. There must be a better way.
I would like to learn the code that sees the open book and then refers to it for the run.
What is the best way to do this?
View 6 Replies
View Related
Jul 7, 2014
I have productivity data sheet of employees for a month and want to update in a tracker sheet.Every productivity sheet has 5 columns containing numbers.Since its monthly it would be contain 30-31 rows and.I want to copy this data then go to tracker apply filter with respective employee name and paste it there.Is there a way to do this using vba code?
I have prepared vba code to copy paste individual rows from productivity sheet to tracker.But preparing row by row code makes it way too big.Hence i am looking for another solution.
View 3 Replies
View Related
Jul 24, 2008
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies
View Related
Feb 14, 2012
Its there any way to hide a Filter button? I want to keep all of them on my sheet except for 1. Here's a screen shot:
View 6 Replies
View Related
Feb 23, 2012
Auto Filter Using Macro
I have a Spreadsheet with names and other data, my question is, can i somehow Auto Filter the First name with a macro that I can assign to a button, what I would like to do is type the First Name in A1 and in B1 have a button that I can press and it will filter all with the name and other data on the same row I have typed in A1 will only be shown.
View 9 Replies
View Related
Aug 4, 2014
Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm‎
View 3 Replies
View Related
Dec 14, 2009
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
View 2 Replies
View Related
May 29, 2013
If I am using the "filter" function in Excel and some of the values in my list change such that the filtering criteria requires certain rows to be add/removed. Is there a way to have this filter automatically update as opposed to hitting the "reapply" button each time?
View 1 Replies
View Related
Oct 29, 2008
I am trying to add a sound alert to a junior athletics recording program. The date of the meetings is in column (A), results are entered in column (B) for a particular event, say 100m sprint. Column (C) & (D) contain formula that recognise if that athletes result is a personal best (PB) result or a club record (CR). I am after a code that will play a sound when a new PB or CR has been achieved. I have downloaded the sounds I want into the office media file. I am new to VB codes. Any suggestions?
View 14 Replies
View Related
Mar 8, 2007
In ("a1") i have a time e.g 12:30
in a2 it is 1:40 ......................etc
i want a vba code that play a file.wav when the time exactly as in a1 then play it agin when it as in a2 repeating it self to .............a12
View 9 Replies
View Related
Oct 28, 2009
I have this
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1") >= 2 Then MsgBox "Check: " & Me.Name, 64
End Sub
but I need to get a msgbox when the value of A1 is >= 2, then when the value is >= 4, then >=6, then >=8 , ............
the value of A1 is going to be increasing by decimal points as I enter data.
View 9 Replies
View Related
Dec 9, 2009
I have to prepare invoices daily basis..i have to write name in attached sheet i.e cell D7 and Operator name in G13..some time my boss catch my mistake that this operator is for any other company and some time he catchs that this company is for any other operator..
I have a list as there..kindly advise me if my operator is not equal to my company or my company is not equal to my operator as per my list in sheet 1 than a alert massenge should come there so that i would not continue typing till i correct it..
Is there any validation formula or any other advise..
View 9 Replies
View Related
Dec 3, 2013
existing workbook that has evolved over several years, there are bits of data spread all over the sheets and there are several sheets.
My question is. Is there a way to show/print/email an alert with a reminder message any time any of the formula cells gets changed, something like "Be aware a formula is being changed, make a note of the changes."
View 8 Replies
View Related