I've got a problem which I'd like to do without using VBA if possible. I have 2 rows, one with text and one with numbers. I need to go through all the text, find the text that matches and add the number in that row.
That's very poorly explained so I've given an example below:
I want to loop through ID Column and find the matching number in Record No.column, and hightlight the entire row when match is found. The code I am running can only work for one cell at a time, but I want to run one time.
I have a total of six columns divided in to 3 columns. Each column has a number in it. I need a formula to tell me which number from the 2nd 3 columns match the number or numbers from the 1st 3 columns.
EX.
123 367 ..... the #3 is a match. the number 3 is in the 1st position. I need a column to relay this information
I have 3 columns thousands of rows each, P, Q and R. Column R is the names of accounts.
I have another column E with also account names but not in same order as R. Another small glitch is, some of the names in R have extra characters at the end (such as one or more spaces bars, etc). But the entirety of the text in E is present in a cell in R, sometimes with extra characters at the end.
I want to match the account names and pull the corresponding values in the same row from columns P and Q, and populate my currently empty columns C and D.
I am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
I'm looking for code to find a copy of the text in cell AH3 in a range AH7:AH100 then delete all copies of the text in that range AH7:AH100 leaving other cells in that range which contain different text intact.
[Date] [Category] [Currency] [ExchangeRate] [.....], etc. 1-3-09 A USD 0,8 1-6-09 A EUR 1 1-7-09 A USD 0,7 1-8-09 B USD 0,9 1-9-09 B USD <formula>
I'd like to have the value of <formula> looked up in older records. Currency and category should match and it should pick the exchange rate with the maximum date.
Which formula and what syntax should I use to have this done?
I have 2 sheets. On one sheet, this column J2:J490 contains text that either says "TRUE" or "FALSE" and another column AJ2:AJ490, text that says "FEES". (many of the other cells in this column say something else). I need a formula that can find the matching text TRUE/FEE or FALSE/FEE in these columns, count them, and give me the product.
I have a spread sheet with Column A = Document number, Column B = revision.
I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.
I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40) Look at the text in column B of the row currently selected and find it in the Z1:Z40 table Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
which function to use to find the row number of a value for interpolation.If I have a table of 5rows and 5 cols, how to find those rows of those 2 numbers between which my interpolation should be done.
X Y 2.2 3.45 2.9 4.56 3.3 6.2 3.7 7 4 8.1
Now I want to interpolate for 3.1. So how to find the row numbers of 2.9 and 3.3
I'm not sure if my requirement would be possible but I am trying to locate a text in cells on a separate table and then return a corresponding amount beside such cell to a cell beside the text I am trying to locate. I attached the excel file with arrows and everything.
I have a couple of excelfiles in which someone made a flowchart with text boxes. I would like a search code that would help me find a text or number in those text boxes. The CTRL+F function only works on cells. Does something similar exist for text boxes? Or can this be made in a macro?
I am having a littler trouble with using a function to find text (last name) in a table and then return full name from the table. See attached sheet with example of what I am looking for.
A quick explanation:
Have a table with columns that have team and name of player. My input is the last name of the player and the team. Need a fomula that searches all the table and then returns the full name of player based on 2 conditions of last name and team.
Figuring out a SUMIF or SUMIFS formula which will clean up some weekly data. I am envisioning a SUMIF formula which looks at the client name in column A in a table and then it will search through the long list of data for all entries for that specific client on another sheet in column "A", for instance. It needs to take into consideration only the encounters which happened between the dates in the table for that client listed in column B & C. The sum will be the column next to the column with each client's name which has a procedure date in between the date criteria's from the table. I have attached an example to better illustrate.
I have a list of English game results with the score and the soccers of the game.
E.g. : [Steinsson 34, Davies 41, Elmander 46; Fuller 91]
As you can see in the excel, what Im trying to do is to find the time i.e which is the numbers in the field and display them seperately onto the cells beside. So what i need is to Find and extract these numbers 34,41,46,91 and paste them just beside cell on the list.
I can use formula but i can only display 1 number, so i think this might require a VBA script.Thanks in advance guys..
I have a pivot table & want use the following to convert the cell from number to text under the Format Cell -> Custom. If I just type in [=1]"COA Denied";[=2]"Deferred to Future Class"; .... it works
However, I add more condition after , it won't work
[=1]"COA Denied";[=2]"Deferred to Future Class";[=3]"Offer Accepted - Confirmed";[=4]"Offer Declined";[=5]"Offer Waitlist Position";[=6]"Student Withdrawal Post Interview";[=7]"Waitlist Declined";
Ive created a pivot table which looks at an Access Database in the form of a Cube. One field has numbers in, but when it comes through as a cube, it treats these numbers as text. So when I have a the rows as this field, they appear in text order, eg. 1, 10, 100, 101, 2 etc (instead of 1,2, 3, 4 etc). How can I get this field to be recognised as a number field in the pivot? (its a number field in the access database). Ive applied a sort to the data where Ive made my own custom list, but this is just a temporary fix. Can i specifiy somewhere that this field is a number and should be treated as such??
The above basically checks for a number, and if fails (there could be #N/A, #DIV/0!, text, or Number-stored-as-text in any cell here), it checks for text. (the 65000 is arbitrary; we will never have more than a few thousand rows)
However this is not reliable--the main problem seems to be number-stored-as-text. And it's not possible for me to do the Paste-Special Multiply *1 trick to convert the numbers because this data is dynamically generated from a database--the user would have to do that every time the sheet opens.
Is there not some formula that simply says: "Give me the last non-blank cell after row 4 in column E, regardless of what type of data"? (Excel 2007)
I have a spreadsheet with a couple of hundred rows on each tab that looks like this: A1: #1 PENROSE TIJUANA MAMA PCH 2620039190 665794 12.00 CT 1 Front 1 1 1. The only constant is the 10 digit number followed by the 6 digit number in the middle and I want to use it to parse the text string. I want the output to be everything prior to the 10 digit number in A1, the 10 digit number in B1, the 6 digit number in c1 and everything else in D1 and so on through the rows.
Name Address Phone # zip Danielle 4561 Danielle 9852 Danielle 22 Danielle 69 Joe 895 Joe 28 John 9821 John 1114 John 698
Say I did a search for Joe. I want to report back all the addresses in which he resided but there's no way to tell how many rows of data each person has. Joe has 2 rows, Danielle has 4 rows and John has three. How do I report back all the relevant rows?
I have a table of data and need to create a function which requires value (string), range and column number. This will then look for the value within the range and return the data for every match of specified value within the table.
I'm working on a travel form, which allows people to enter a travel itinerary. From that, I want to be able to extract the cities where they are spending one or more nights - so that I can then do the calculations for accommodation allowances.
I am able to calculate the number of nights stay in each city where there is an overnight stop. But I'm stuck on how to extract every combination of City and Nights where Nights is greater than zero - there is no need to calculate for cities with no overnight stay.
I have attached an example spreadsheet.
Some notes:
- the itinerary and accommodation tables have to remain separate, as they hold more data than in the example, - the itinerary table can't be sorted for number of nights. It has to be in chronological order for each segment!
Every lookup function I check out seems to demand a sorted table.
I have a pivot like the one above. I want to keep only the rows if "bar' falls within a range. So in a certain range (say d2:d7) I set the criteria for "bar". Is there a way to tell the table to keep only the rows, if the "bar" value can be found in d2:d7?
I want to search or filter the list and find the only non matched record in the list and put this in another sheet ie max as this is the only unique name in the list, all the others are matched. Everything I have tried eg filter for unique records returns ian andy john david max, which is not what I want.
