I want to loop through ID Column and find the matching number in Record No.column, and hightlight the entire row when match is found. The code I am running can only work for one cell at a time, but I want to run one time.
View 11 Replies
I have a spreadsheet with 65000 potential client surnames in column c, with contract details in neighbouring columns. I have also a spreadsheet of 6000 actual client surnames. I would like to search the large spreadsheet to make sure that none of the clients are contained in it, or if some are to highlight them.
Do I use advanced filter or vlookup? I use excel 2000 and due to the size of the first spreadsheet it takes 6 minutes to open/save e.t.c.
I have a total of six columns divided in to 3 columns. Each column has a number in it. I need a formula to tell me which number from the 2nd 3 columns match the number or numbers from the 1st 3 columns.
EX.
123 367 ..... the #3 is a match. the number 3 is in the 1st position. I need a column to relay this information
I've got a problem which I'd like to do without using VBA if possible. I have 2 rows, one with text and one with numbers. I need to go through all the text, find the text that matches and add the number in that row.
That's very poorly explained so I've given an example below:
text 1 20
text 1 10
text 2 10
text 1 20
text 2 10
I need the formula to do this:
text 1 50
text 2 20
I have 2 sheets. On one sheet, this column J2:J490 contains text that either says "TRUE" or "FALSE" and another column AJ2:AJ490, text that says "FEES". (many of the other cells in this column say something else). I need a formula that can find the matching text TRUE/FEE or FALSE/FEE in these columns, count them, and give me the product.
View 9 Replies View RelatedI am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
View 1 Replies View RelatedI have a number in column “A” and I want to match them with column “D“, the number in column “C” and “D” is true value. find attached sample sheet for more detail.
View 6 Replies View RelatedI believe this rightmost column number information is available. I just could not find it!
View 3 Replies View Relatedhow do you find the number of rows and columns of an array?
View 4 Replies View RelatedI have a workbook with several sheets that have basically the same template but some have many more rows that others..
I am using the following code to hide columns based on cell value to "tidy it up" for printing.
Code:
Dim i As Long
For i = 170 To 2 Step -1
Cells(39, i).EntireColumn.Hidden = Cells(39, i).Value = "N"
Next i
I would like the VBA to determine what the row number is based on the row header e.g. "Prioritised Courses", rather than having to maintain the code each time new rows are added.
I would put it at the top or way down the bottom, but multiple (even less excel skilled) users will be using the "hide columns" functionality.
i need to match 2 columns on one worksheet with 2 columns on another.
One column is alphanumerical (Reference Numbers), the other is company names.
I need to ensure that both the Reference and Company name match from one sheet, with the company and reference from another.
e.g if A1 and B1 on Wks 1 = A1 and B1 on Wks 2 = TRUE, anything else is FALSE.
There is likely to be Reference number and Comapny name duplicates, therefore the trick is to ensure that the number of duplicates match?(I.E ABC Company, Reference number 1234 may appear 5 times on worksheet 1, however if it is only on Worksheet 2 4 times, then this must be flagged).
Col cCol dFormula
Lease TermCompany #6023%
3637%
4843%
6052%
12620%
247FALSE
368FALSE
48105%
609FALSE
Residual Table
Company #
127
438
569
10
Col b
Lease TermResidual %
1210%20%9%
245%9%6%
364%7%3%
483%5%2%
602%3%1% ......
I want to add these numbered steps onto the macro I already have, which I pasted below.
1. Starting in Row 2 in the worksheet named Report 1 look at contents in Column A then look at the contents in Column C, if the contents in Column C do not match exactly the contents in Column A then copy the contents in the range column C:E from that row till the last row in Column C:E.
2. Now we will have a range that is made up of cells from C:E. I would like to move that range down a row at a time, until the first cell in Column C from the range Column C:E matches exactly the contents in Column A. Then I would like to continue this pattern for every row in the worksheet.
I have two spreadsheets, both contain matchable data. First one with amounts. Next one hs customer name, period and amount columns.
View 3 Replies View RelatedI need to match the first column with the second column, and if is the same value, copy the value in third column to the forth column.
View 1 Replies View RelatedI have a list for example...
Ian
Andy
John
David
Ian
Andy
John
David
Max
I want to search or filter the list and find the only non matched record in the list and put this in another sheet ie max as this is the only unique name in the list, all the others are matched. Everything I have tried eg filter for unique records returns ian andy john david max, which is not what I want.
I have a Meeting Place and Cities Table(too large).An example attached as a file and explained waht is wanted.
View 2 Replies View Related=MID(M11,FIND($V$6,M11),LEN($V$6))
I use the formula above to return the the matching word in v6, from text within m11. If theres is no match it returns #value. is it possible when theres no match to return "Not Match" in the cell instead
See the attached workbook.
Alright: Sheet2 is a list of lines that have a parallel match, sometimes more than one. This example has 3 lines with slope 0.18 and I've added a few extra at the bottom for the sake of the example.
Worksheet Intersect is a working page where in the Bordered Box, highlighted in Green is full of parallel lines from Sheet 2. Sometimes there's none so I have a column to the right that says true if the line is on sheet2 and false if not. There's a helper column to the right to count up the trues and false.
I need to have laid out below, all the matches on Sheet2 to the green highlighted lines but not the original line that made the True. There could be lots of them, there could be one, this example has two for the slope of 0.18 and one for all the rest.
How do I write formulas to pull the matching slopes (column A) and y-intercepts (column B) from sheet 2, if there's an unknown amount and then list them on the intersect page?
The results will look something like:
True 1...............True 2...............True 3..............True 4................True 5
.36........2.00.......18.......24.01.....-0.32.....3.00....1.04......4.00 .......0.83.......5.00
..........................18.......21.32
how to reference the drang (named range) and the cell propertly as i keep getting an error.
Everything in the below code works except the parts below in blue
details:
I have in column X lots of names and in column Y (dynamic column
anges as the users chooses them as per the code) and I want to loop through all names in 'X' and if there are multiple of the same names then for the corresponding 'Y' row entry of each be checked and if they are equal (same $ value) then for one of them of cells in the Y column to be cleared.
Basically if the same name appears more than once it will most likley have the same $ value and if i do a calculation on the $'s it will be 2,3,10 times the amount it should be, hence the need for this .
As per the below code I am trying to use 2 for Each loops though I keep getting an error when trying to reference the drng range which has the values in them..
I have two worksheets each of which includes a left column of unique email addresses (at least, unique within each lsheet)
The data on each sheet is structured identically. What I want is to generate a list of records that appear on both sheets.
i have a worksheet that is about 100rows x 100columns.
i would like to create some code to find a certain record. for example..
a1 a2 a3 a4
the record might be " tony tony alex tony"
basically, this group of cells could be any where in the group and i need some code to search the worksheet and then outline it. i just want to be able to find a certain block of cells and outline it.
How do I create a formula that will count the occurrences on each row within the range F7:H106 where the single digit in FJ6 is paired with the 2 digit value in FF7. Match in any order.
example
If FF7=00 and FJ6=1 (Match 00 with 1 in any order)
f7:h7=010, match, count 1
f8:H8=059, no match
f9:h9=100, match, count 1
f10:h10=001, match, count 1
f11:h11=007, no match
Result=count=3
In a row on the spreadsheet I have a range of dates from 19/09/2008 to 19/06/2008 mainly with a weekly interval.
I want to incorporate into the macro a find function so that it can determine the first occurrence of a specific month and return the row number.
Using the Find Function in VBA with pattern matching, I want to find the End statements in my code. How do I stop it finding the End If statements, of which there are hundreds maybe thousands. I tried End[ ][ ][ ] and End[!I] etc but they exclude the End statements as well.
View 3 Replies View RelatedI have two worksheets, sheet 1 and sheet 2. On sheet 1, I have a information on two columns (Column A and B) Column a has information up to row 10 (aaa, bbb, ccc, ddd, ...). On column B, I have 111, 222, 333 . I have same information on Sheet 2. However, sheet two has an additional column (Column C) with 10 rows on information z, y, x, w, v ...
What I need to do is to match column A and B in sheet 1 to column A and B in sheet 2 and if both columns matches on the same row, copy the value in sheet 2, column C and paste it on sheet 1 column C.
Important: Information on sheet 2, column B may be twisted (As they may not appear exactly the same as in sheet 1. Which means 111,222,333 can be 222,333,111 along the column). Therefore, need to match the entire range.
I need creating a formula that matches the values between two separate columns with results from that matching in the third and fourth columns.
Example: Column A contains the first set of values and column B contains the second set of values. The result in column C would be all the values that are in both columns A and B and the result in column D are all the values that are not found in both columns A and B.
Column AColumn BColumn CColumn D
122123123122
123133322133
231221323221
311322231
322323311
323333333
See attached spreadsheet : match_values.xlsx‎
Alright, so I need data in column A(Last names) and data in column B(First name) to match their respective names on another sheet. When a match is made, it will return column C(Hours worked).
I originally used Vlookup to match last names, something akin to =VLOOKUP(A:A,Week1!A:P,4,FALSE)
But this does not account for employees that may have the same last names. Is there a way to combine two vlookup's? Or is Index a possible solution?
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name and the other column lists the names as first name and then last name without the comma .
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I am trying to 'stagger sort' multiple columns, but am having some difficulties.Ex.
Say A and B are lists of part no and C is data corresponding to column B. I have:
A B C
1 2 .
2 3 ,
4 4 ;
5 7 '
8 9 "
I want:
A B C
1 _ _
2 2 .
_ 3 ,
4 4 ;
5 _ _
_ 7 '
8 _ _
_ 9 "
(the _ are just supposed to be empty place holders, without them I have formatting issues)
Is there a 'quick' way to sort them this way?I am attaching the actual file that I am working with.
