I have a spreadsheet that I have been entering and deleting data from. Currently there is data in A1:J1 only, however, when I Ctrl+End my cell focus is on J242. I have deleted rows 2 through 300 and cleared all from the Edit menu on cells A2:J242, both to no avail. How do I clear this so that if I Ctrl+End it goes only to J1?
View 2 RepliesI wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies View RelatedI'd like to insert the value of a cell in Excel worksheet A into the cell of another Excel workbook B. The twist is that the Worksheet A begins as a templated file and is copied into new jobs each time. The destination spreadsheet B location and name stays the same but the source file changes location. So the destination file B can't be looking to be updated. What needs to happen is that once the source spreadsheet A is copied into a new job, whenever the spreadsheet is updated and closed, it needs to "export" the new value into the source file B. Not the other way around as the destination file will not know the location of this new source file. Sorry for the confusing syntax but hope this is clear enough for an answer. Here's an example of the question: How do I automatically, on closing this source workbook A, update cell D24 into file C:MyFilesExcelFormerFile.xls Sheet1 cell B27?
View 2 Replies View RelatedI have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI'd like to create a button that makes the "Find and Replace" popup come up when pressed. How to do this? (Ctrl + F is the shortcut for it)
View 3 Replies View RelatedI‘ve made a Userform which should transfer data form the userform to a spreadsheet (see Example). Because the spreadsheet contains a formula in column A the data must be place in column B and further. This part of the code is working. I also want the data to be placed at the first empty row. The following code works when no data or a formula is entered in column A. Because column A contains data up to row number 14 the data will be placed in the first empty row number 15.
Private Sub cmdAdd_Click()
Dim lRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
' Find First empty row
lRow = ws. Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
The code has to be changed so it will find the first empty row. If I use the userform in this example the data must be place in row number 6 in the columns B till L.
Im trying to find out if there are any duplicate records in my spreadsheet. See look at the attached. Cell 6745 down is highlighted in green. I want to check this against all the cells above. need to write a formula so that it marks any products in the green section with duplicate (in column I) if they are in fact repeated.
View 2 Replies View Relatedi need to find the missing numbers from 12 rows of 20 numbers.
ie, i have these numbers (only between 1-80) and need to find the *normally* 2 numbers that are not in that list between 1-80. there are 14 rows in this example
134810131417182832464855565758596475
412131417212223303235374044545861707880
57101117202528303435363940495155606264
35121823254148495051565860646670767879
311161719212225262829404447586063697578
126713162326353638394652535863707678
710172021272930414445464750515569727374
[code].....
these numbers wont be the same every time, but in theory after i enter 12 rows there should be only 5/6 numbers left max.
i need a script so that when i copy/paste 12 rows, i can be presented with the numbers not in that field. or even if i have a field of 1-80 displayed, then i copy paste my numbers in the fields below and can somehow highlight which numbers between 1-80 aren't in my pasted fields on the 1-80 field.
btw the numbers missing here are 24-68
ps im using excel starter 10 if that makes a difference
The 1st set is in a column. Nice & tidy all twelve characters in length & alpanumeric
zx0123123123
zz0123123124
zy0123123129
The second set is a mess, taken from a lotus notes inbox from the subject line off an email, eg. there Blah blah zz0123123124 etc etc. What I want to do is do a reconcilliation between the two with a lookup, but have no idea which route to go down to get round the messy data. I have been using =IF(ISNA(MATCH(A1,'[spreadsheet to lookup to.xls]sheet1'!$A:$A,0))," No match"," Match")
but here the data is clean. I have searched teh forum ;o) DaveH & found something about > Instr() but this can't be used in formulas..
I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
I am trying to find risk analysis calculation for the attached spreadsheet.
View 2 Replies View RelatedI want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I am acquiring multiple spreadsheets that do not always match row number, due to additional information on some sheets. By this I mean that the information may be in row 31 on on sheet and row 39 on another, the column location is the same each time. I have been trying Vlookups, indexing and matching plus combination formulas - with no luck. How to get the information I need with a moving cell reference?
I can provide a small copy of a workbook, if needed.
I have a sheet with 12 months in it, each in a column. As month's go on, I put the cumulative sales figures (YTD sales) in the given month. What I'm trying to figure out is how in the 13th column (i.e. the one after december), can I have it show the value of the most recent cumulative sales (i.e. if we are in May, there will be sales data for jan, feb, mar, and april and I want column 13 to show the value of April since it will be the month that last has data.
View 4 Replies View RelatedBasically I need a formula that work as below. It's over two sheets and is probably very easy to most of you I just cant get my head round this one!!
If B1 (sheet 1) = "TEXT1" ,FIND the content I1 (sheet 1) within a1:a3000 (sheet 2). If I1 is found in that range i need to know the text in the cell next to the found text.
E.g.: the text of I1 (sheet 1) was found in cell a234 (sheet 2) so it gives me the text in b234.
I have a worksheet that projects data into the future. Say 5 rows with each column containing a projection. In the last column (say 10) I want a formula that detects the cell to the left that first contains data and returns that data.
Each row will have data in different columns.
create a macro that will find and calculate based on the details of 4 columns on the same spreadsheet.
Basically, here is what I need to do:
1. Need to calculate how many QTY IN (Column F) and PALLETS IN (Column I) of a specific PART# (Column A) and LOT CODE (Column B) For example if enter a PART # and LOT CODE, it will calculate how many QTY IN and PALLET IN of that PART # and LOT CODE.
2. Need to do the same for QTY OUT (Column G) and PALLETS OUT (Column J) also.
3. Output should contain the PALLET # , QTY IN and PALLETS IN based on the PART # and LOT CODE search. I just want to simplify the search function in this spreadsheet because it is very cumbersome if you need to find how many items left for that PART # and LOT CODE.
Attached is the spreadsheet..
i can use the VLOOKUP function to find entire cell in one table and paste the required data from the row....
Is there a function to search part of data and paste the required data
I am looking for a macro to do the below
copy range b2:b8 from sheet 2
find the first empty cell on sheet 1 row 2
paste values into there
In Sheet1 I've got a list of names in column A, then I've got a worksheet for each name in the list. I'd like to fill in column B with information from the worksheet of the same name as in column A.
Quick example...name in column A is Davis, want to fill in column B with a value from cell C3 on worksheet named Davis and do it for the entire list. Data being looked for is in same cell on each worksheet. Tried using a formula and dragging it down the list, problem with that is it doesn't change the sheetname just the cell.
Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
View 3 Replies View RelatedI need to write a conditional formula that will look up in a 2nd worksheet the last coloumn with data (note that there will be some coloumns in the row that will have data and some that will be blank, I need the last column for that specific row to be the return result)
View 9 Replies View Related