First Visible Cell Row Number To Use In For Next?
Feb 1, 2014
I have autofilter in Range D11:E11 and data goes down from D11:E11 to 50000th rows.
[Code].....
code for-next statement.(İn this condition "12" is fixed)
But now when make autofilter for D11 (example for only 1 item) first visible cell comes as D135 and E135.
I want to use automatically 135as variable instead of fixed 12 in for i code.( This 135th row changes depending autofilter values)
How can I modify this For i code to use variable first visible cell row number?
View 3 Replies
ADVERTISEMENT
May 8, 2013
I am looking for a bit of code that will count the number of visible columns either. I have the following which is missing the code to establish if the range is visible or
Code:
Do Until rngVisibleColumnCount.Column = Range("HRISData_RoleError").Column
'Code to establish if visible
intVisibleColumnCount = intVisibleColumnCount + 1
Set rngVisibleColumnCount = rngVisibleColumnCount.Offset(0, 1)
Loop
View 2 Replies
View Related
Jul 20, 2007
I have a list of numbered items and what I would like to do is display that items position in the list should an autofilter be applied
For example, with no filter applied the list could look like this:-
Col A Col B Col C
1 1 Armadillo
2 2 Platypus
3 3 One-legged Schornztickler
4 4 Armadillo
And when the autofilter is applied to Col C with a criteria of Armadillo the results should display thus:-
Col A Col B Col C
1 1 Armadillo
4 2 Armadillo
I'd really like a non VBA solution, but as I can't work one out myself I guess that's not an option?
View 9 Replies
View Related
Jan 9, 2014
i need some formula, how to count data with 2 criteria: 1. data is visible cell only and; 2. data is ignore zero number/blank...
i have using subtotal but not fully work....
View 4 Replies
View Related
Jul 12, 2014
I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies
View Related
Aug 28, 2007
what i need to do is store the number of rows visible on the data sheet (after a data filter is applied) into a variable so i can do a calculation with said data. Is there such a command?
for example....
data:
row header a | row header b
line 1
line 2
line 3
after auto filter:
row header a | row header b
line 2
code stores number of rows visible into a variable....
vVariable = rows visible... in this case 2 (NOT 4... which is the total rows including hidden)
View 5 Replies
View Related
May 26, 2009
I have a worksheet where rows are continually hidden and unhidden.
When the code to hide or unhide the rows runs I would like to have a macro that sequentialy numbers/labels the visible cells in column D that contain hyperlinks.
i.e the first visible cell with a hyperlink will have it's text changed to "Table 1", the second visible cell's text will become "Table 2" etc. The hyperlink should not be altered when this happens.
View 13 Replies
View Related
Apr 22, 2009
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies
View Related
Jul 1, 2014
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
View 2 Replies
View Related
Oct 27, 2013
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
View 1 Replies
View Related
Jan 7, 2009
I have seen spreadsheet where the user has made the outline of the cell border non-visible. This seems like a fairly simple task, but I can't seem to find out how you format this type of border.
View 2 Replies
View Related
Feb 14, 2014
I'm looking for a formula that will display the contents of a cell location. In other words, I have a sortable list (example: A3 - C20, where column C cells contain either: "EEE", "FFF", OR "GGG"). If I sort by "FFF", it will only display rows with that criteria. I need a formula to place in C1 (above the list), that will display the contents of the top cell in column C of my list, reguardless of how it is sorted.
Similar to the subtotal formula, but with text.
View 6 Replies
View Related
Aug 5, 2014
[Code] ......
What is wrong with above code? I am not able to select previous A15 cell, when macro is selected from C1 cell ( B row is filtered to hide ).
View 1 Replies
View Related
Mar 30, 2009
I need to make my button CommandButton1 visible if I have a good value (0-200) in cell G30, and invisible if the resulting cell value is no good #N/A.
View 5 Replies
View Related
Nov 18, 2009
I'm using auto filter to gather information from a giant list. I'm able to use Subtotal function in Row(1) )to gather all the numbers for a person.What I havent been able to do is figue out a way to get the value of the person that I am auto filtering.
Example
Row 1 contains my subtotal formula's
Row 2 Header Row
Row 3 Auto Filter Buttons
Row 4 All The Data
Column(A4:A65000)has the names of the people So when I use the Auto filter by Name how can I get the first visible cell name to show in (A1)?
View 4 Replies
View Related
Feb 1, 2010
What I am doing is using Column "Z" to determine if there is a value in Column "Q" by using this formula pasted down the entire column "Q3:Q65536"
View 2 Replies
View Related
Dec 13, 2006
I'm using a named range called "VFILTER". This range is my filter range. Once the filter does it's thing, I want to set the first visible cell in column a to a variable...I can't get this right for the life of me!
With Range("VFILTER")
.AutoFilter
.AutoFilter field:=25, Criteria1:="DELETE"
.Offset(1, 0).Resize(. CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible). _
EntireRow.ClearContents
.AutoFilter
JPhelper.ClearContents
JPhelper = "=IF(ISNA(MATCH(B5,J46DATA,0)),FALSE,TRUE)"
.AutoFilter
.AutoFilter field:=25, Criteria1:="TRUE"
.Offset(1, 0).Resize(.CurrentRegion.Rows.Count - 4, 9).SpecialCells(xlCellTypeVisible).ClearContents
'set the first visible cell in column a to variable
Set OutRange = .Offset(1).Resize(.CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible)
End With
View 4 Replies
View Related
Feb 7, 2007
I have a spreadsheet from which i run monthly reports for aother business area. I have filters in row 2 (which is my header row) and what i want to do is filter column CH to show blanks and filter column CE to show non blanks. Then in every visible cell in column CH below the header row (row 2) i want to enter todays date - this is so a record is kept of when each row was detailed in the report. I have tried the code below (which i tried to amend (unsucessfully) from code i got here to clear some cells when i ran another filter for another report).
Sub FilterSheets_Monthly_OFMDFM()
If ActiveWorkbook.ReadOnly = True Then
MsgBox ("This filter must add the date on each row included in this return." & vbLf & vbLf & "It must be run while the workbook status is not Read Only!" & vbLf & vbLf & "Please close this spreadsheet and re-open using the password. Thank you.")
Exit Sub
End If
Dim i As Integer
Dim rng As Range
Application.EnableEvents = False
Application.ScreenUpdating = False........................
View 4 Replies
View Related
Mar 16, 2007
how I could split a cell's contents into two cells when it contains more than 1024 chars? The code would need to be clever enough to split the data after the nearest full stop before the 1024 char limit.
View 3 Replies
View Related
Jan 14, 2008
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
View 3 Replies
View Related
Jul 1, 2014
ive added a filter, and on column A i want to find the first blank row under the header and type the word 'tech' and fill down to the last row populated against column b.
View 1 Replies
View Related
Mar 15, 2009
I have a worksheet whereby many of the rows are hidden. These rows were initialy hidden by means of scipts ( I have numerous scripts to hide data under various criteria) eg: Scripts which hide rows based on cell count, cell color, cell data information etc...
Now that I am able to veiw only the information that i want to see.. is it possible to create a script which selects cells only from rows which are visible? I have created a Named range begining from E:12 to G:500 called "Select_EFG"
Uing the example below, how could I select the cell data from the visible rows (12, 30, 34, 35, 50 etc... up to row 500.) from this Named Range (columns E:12, G:500) .... and paste this information in Sheet 2 Row5 columnC
........A,B,C,D,E,F,G,
Row
12
30
34
35
50
57
59
100
140
400
490
500
View 2 Replies
View Related
Nov 16, 2011
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies
View Related
Apr 3, 2008
Im trying to create a userform that will enable the user to select a record from a listbox and then to edit the info for that record by changing the contents of text boxes which are set to display the current info. What I have seems to work intermittently. I basically use autofilter to find the selected record on the worksheet, then I set the value of each cell in the row to that of the appropriate textboxes. ListBox2.Column(4) contains the unique id for the selected record.
Private Sub saveclient_Click()
Dim WS As Worksheet
Dim newrng As Range
With Application
.ScreenUpdating = False
.EnableEvents = False
End With
Set WS = Sheets("Clients") '<<< Change
Sheets("Clients").Select
WS.AutoFilterMode = False
Set newrng = WS.Range("A1:e" & Rows.Count)
MsgBox Me.ListBox2.Column(4)......................
View 3 Replies
View Related
Feb 8, 2010
I have attached sample workbook that has a user form with 6 check boxes and 3 text boxes. The value of each of the text boxes is based on a cell value in Sheet2. I have the visible property of CheckBox5, CheckBox6 and TextBox3 all set to False. What I would like to be able to do each time the user form is opened is have the visible properties of those controls dynamically changed to True only if Sheet2 cell A3 has text entered in it.
View 2 Replies
View Related
Oct 15, 2007
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
View 8 Replies
View Related
Aug 13, 2013
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
View 9 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Feb 5, 2009
Cell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
View 3 Replies
View Related
Jul 18, 2013
I have numbers in b2 to b5 say
10
22
35
50
I have numbers in c2 to c5 say
1000
1580
3000
45000
I have numbers in cells d1 to kq1 (1 to 300) d1=1, e1=2, f1=3 and so on
What I want to do is:
In D2 through to kq2 it puts the number in to the cell that correspnds to a multiple of the number in b2.
That would put 1000 in cells m2,w2,ag2,aq2, ba2 and so on
In D3 through to kg3 it it puts the number in to the cell that corresponds to a multiple of the number in b3
that would put 1580 in cells y3,au3,bq3,cm3,di3 and so on
View 2 Replies
View Related
