Format Row Based On Single Cell Value In That Row

Jan 21, 2008

I have a macro that's supposed to see if cell 5 meets criteria and continue to all sheets in workbook, except " Total".

When I activate the macro on a specific page, it runs smoothly on that page. But when it's finished, it doesn't continue to the next sheet in the workbook.


Sub ColourBG()
Dim ws As Worksheet
Dim line As Integer
endline = Range("A1000").End(xlUp).Row

For Each ws In Worksheets
If ws.Name <> "Total" Then
With ws
For line = 3 To endline
Application. ScreenUpdating = False
If (Cells(line, 5).Value = "0206") Then _
Cells(line, 1).EntireRow.Font.ColorIndex = 5 '*(Blue)
Next line
Application.ScreenUpdating = True
End With
End If
Next ws
End Sub

View 9 Replies


ADVERTISEMENT

Conditional Format X Number Of Cells Based On A Single Cell?

May 4, 2014

I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.

For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.

View 3 Replies View Related

Format From Column To Single Cell

Feb 17, 2014

I have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?

I have attached a sample spreadsheet.

View 3 Replies View Related

Conditional Format Array From Single Cell

Feb 25, 2009

This has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.

=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)

View 2 Replies View Related

Format Multiple Cell Values Displayed In Single Cell?

May 24, 2012

I have the following data on a spreadsheet created by a formula:

A1: 1.1234
A2. 2.234
A3: 3.34

I have the data formatted to only have two decimal places so it looks like this:

A1: 1.12
A2: 2.23
A3: 3.34

I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:

=A1 & "," & A2 & "," & A3

However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34

Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34

View 3 Replies View Related

Multiple Row, Single Column Cell Blocks Into Single Row, Multiple Column Format

Mar 21, 2008

I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...

View 9 Replies View Related

Change Cell Format Based On Existing Currency Format

Jun 12, 2008

I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?

View 5 Replies View Related

Excel 2010 :: Return Range Of Cell Concatenated Based On Single Cell Value

Jul 2, 2012

I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:

Number of variable entered: 5

q9001
q9002
q9003
q9004
q9005
q9006
etc.

Should give me: "q9001 q9002 q9003 q9004 q9005"

I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.

(Using Excel 2010)

View 7 Replies View Related

Formatting Cell Currencies Based On A Selection In A Single Cell

Jul 28, 2009

I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.

View 9 Replies View Related

Check Cell Rows Based On Numbers In Single Cell

Jun 12, 2007

I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.

View 7 Replies View Related

Populate List Based On Single Cell?

Apr 8, 2014

When I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.

For example:

Number of Steps 5

x x^2
------------
0 0
1 1
2 4
3 9
4 16

Number of Steps 9

x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16

You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.

Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.

View 7 Replies View Related

Conditional Boundaries For Whole Row Based On A Single Cell's Value

Apr 17, 2007

Need to write a code that gives a whole (from column B to column S) row a bold upper-boundary if that row has a value in column B?

View 2 Replies View Related

Cut And Paste Row Of Data To New Worksheet Based On Single Cell Value

May 8, 2012

I have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.

Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.

View 14 Replies View Related

Creating A Formula Based On Dimensions In A Single Cell

Dec 10, 2009

In my business I deal with a ton of different dimensions for my products. A lot of times the dimension will be within the cell as follows, "Product A 17x27 Brown", is in a single cell.

Is it even possible to write a code or formula that will find the "17x27" in the description, recognize it as a "dimension" and then run the formula that I need which is

View 18 Replies View Related

VBA Delete Entire Rows Based On The Value Of Single Cell

Jun 10, 2009

I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.

More details: ....

View 9 Replies View Related

Adding Multiple Row Contents Based On The Content Of A Single Cell

May 30, 2007

Been trying to work this one out and have ended up banging my head against the wall.

Basically I have a spreadsheet, in the first column is the person's name, in the secon which team they are in and following this a cell for each day of the month with their availability.

The team name is a selection from a list, the availability is 1-6 (different levels of availability)

I'm trying to do subtotals at the bottom for each separate team, so the very last row each of the cells for each is added up:

Name Team 1st 2nd 3rd 4th 5th 6th 7th etc.
Mr X ___1st___1______2__1
Mr Y ___2nd_______2________5__5__5
Mr Z ___1st___1____________3__3__3

Total 1st: 2 2 1 3 3 3
Total 2nd: 2 5 5 5

So basically the formula in the last row goes along the lines of:

Add each cell in the column IF the team name = 1st

View 9 Replies View Related

Extract Text In Single Cell Based On Font Color

Aug 5, 2008

I have a cell that has a formula in it like PREM + PRDCMP + ACQ + DLR in a spreadsheet that looks like this:

PREM PRDCMP ACQ DLR VIP COMM TOTAL
2 1 3 4 6 5

PREM + PRDCMP + ACQ + DLR 2 1 3 4 10

where PREM + PRDCMP + ACQ are colored red and + DLR is colored blue. This formula is entered in that particular cell as a text string. I have a formula in the PREM column that says if the word PREM is located in the formula to the left (and it is), then put the value that is located right under the PREM column (2) in the blank cell next to the formula. So, in the above example, I have an IF statement that sees that PREM is in the formula to the left and so underneath the PREM column, next to the formula, it would place the number 2. Now, I need Excel to detect if any word in the formula text string is colored blue and if it is, to put a zero in that column. So, in the formula above, if + DLR is the only text that is blue, I want to have Excel add 2 + 1 + 3 only. I want to have Excel take any string out that might be colored blue, such as + DLR and return the value of zero for it. The purpose of the different colors in the formula is to distinguish which information is relevant and which information should be ignored. So, I'd like Excel to read the above formula and say put the PREM amount in the cell under PREM, put the PRDCMP amount in the cell underneath PRDCMP, put the ACQ amount in a cell under ACQ and put zero in the DLR column since it is colored blue. If any of them (PREM, PRDCMP, ACQ, DLR, VIP or COMM) are colored blue, I want Excel to put a zero in that column.

View 6 Replies View Related

Data Validation - Control What User Enters Into Single Cell Based On Others

Nov 29, 2013

I want to control what a user enters into a single cell based on others.E.g.

A B
1 20 500
2 50 500
3 75 500
4 100 300

Column A is a thickness and column b is a width what I want to happen if the user enters a thickness in cell D1 and a width in cell D2 I want an error to pop up if for instance the user enters 100 as a thickness to only allow a maximum of 300 in the width. likewise if the user enters a thickness less than 100 in cell D1 to allow him to enter up to 500.

View 4 Replies View Related

To Merge Variable Number Of Cells Into One Single Cell Based On Criteria

Sep 19, 2009

Here’s an example of my data:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH

I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:

A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH

View 10 Replies View Related

Excel 2010 :: Highlight Entire Record Based On Value Of Single Cell?

Apr 10, 2013

MS Excel 2010, WinsXP

how to highlight an entire record based on the value of a single cell?

I would like to highlight all records grey where cells in a column = "closed".

View 4 Replies View Related

Shading And Locking Multiple Cells From Input Based On Value In Separate Single Cell

Sep 23, 2013

Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.

View 5 Replies View Related

Excel 2003 :: VBA - Adding Named Template Worksheets Based On Single Cell Value

Apr 24, 2012

I'm trying to make a macro in Excel 2003 to create x amount of named worksheets that are a copy of a different worksheet.

1. I have a main worksheet that will have a number manually entered into a cell (lets say A1);
2. I have a 'template' worksheet;
3. I'll assign the macro to a button on the main worksheet

If I enter '10' into cell A1 of the main worksheet, I'd like to click the button and have Excel create 10 copies of the template worksheet. These new worksheets should all share the same name with a number after them (ex: banana 1, banana 2..... banana 10).

View 2 Replies View Related

Excel Macro To Copy Cell From Multiple Sheets Into Single Sheet Based On A Value

Aug 16, 2013

I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".

Now I want to copy the row containing "total" from all the sheets into another sheet called "report".

View 9 Replies View Related

Macro That Will Clear Contents Of Cell Based On Format Of Text In Adjacent Cell

Feb 18, 2009

Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.

View 2 Replies View Related

Conditionally Format Cell Based On Another Cell That Is Manually Colored?

Nov 24, 2013

let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?

View 7 Replies View Related

Change Result Cell Format Based On Input Cell Value

Mar 24, 2007

Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.

View 2 Replies View Related

Format Row Based On First Cell Value

Sep 21, 2012

Y3:Y500 contains a range of years, 2014/2015 through to 2018/2019, for a total of 5 different values (So conditional formatting is out the window). I'd like code which highlights the rest of the row, Z:FN, in a certain colour depending on the value in Y3:Y500.

Also, where there is data in the cells between Z:FN I'd like that to highlight in yet another contrasting colour.

View 9 Replies View Related

Conditional Format Cell Based On Data From Another Cell

Nov 11, 2012

Can I conditions format a cell based on data from another cell?

View 8 Replies View Related

Conditionally Format A Cell In A Grid Based On Other Cell

Sep 12, 2006

way to conditionaly colour code all cells in a grid based on cells in other grid: i.e.

gridA
1 1 2
1 2 1
2 2 1

grid B
12 11 14
34 16 53
35 64 23

i want all cell in grid B to be red if the coresponding cell of GridA is 2.
so here "14" "16" "35" and "64" will be red!

View 9 Replies View Related

Numeric Format Based On Cell Value

Nov 17, 2009

I am stuck on this one. In the attachment I have values pulling into N3:N7 based on a drop down choice. Some of the numbers are numeric (no decimals), others are currency (no decimals), others are percentages (2 decimals), etc.

Is there a way to pull values I'm currently pulling into column N and have those values match the format of the source? I've tried converting it into TEXT but then I cannot place conditional formatting data bars on the values and have it work.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved