Count Formula Cells

Aug 21, 2008

I have a sheet with 1 collumn containing dates (typed as date) and formula's (=today()). I would like to count de cells which contain the formula "=today()". If I count the cells containing today's date, it counts the cells containing the typed date and the cells with the formula "=today()" as well. So here my question: Is there a way to make a difference between "dd-mm-yyyy" and "=today()"?

View 7 Replies


ADVERTISEMENT

Count Formula: Count Cells In Column That Are Graeter Than 160

Feb 5, 2010

I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.

View 4 Replies View Related

Count Cells Only When Formula Popluates A #

Feb 22, 2007

I have a column filled with sum formulas, but I need to count the number of cells in which a value is populated in the above cells.
!

View 13 Replies View Related

Formula To Count How Many Cells Are The Same Between To Columns

Aug 2, 2007

I need to know if there is a formula to count how many cells are the same between to columns, IE: If "Bob" had #s 2, 3, and 5 and the correct numbers are #s 1,3, and 5, Is there a formula to put in the cell below "total" to figure out how many of the #s Bob has are the same from the correct #s?

BOB-----CORRECT-----TOTAL
2-------------1-------------2 (Bob picked #3 and 5 which are correct)
3-------------3
5-------------5

PETE-----CORRECT-----TOTAL
1-------------2--------------1 (Pete picked #6 which is the only 1 correct)
3-------------4
6-------------6

View 9 Replies View Related

Formula To Count Words In Cells

Jan 14, 2009

I need a a formula that will count the number of times a word or phrase appears in a column of cells and assign a number

For example....

Big Red Ford Truck = 1
Ford Truck = 3
Red Ford Truck = 2

After i get the formula, I can sort by "greater than 2"

View 9 Replies View Related

Countif Formula To Count Cells That Contain Everything But Certain Text

Jun 3, 2014

I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.

View 11 Replies View Related

Formula To Count Cells With Visible Text?

Jul 25, 2014

I have a column of cells (say N7:N149) for which I would like to count the number of times text is visible, as some are blank. Normally I would go =COUNTA(N7:N149), but in this instance the cells are only blank because I have related them to adjacent cells and nominated "" if those adjacent cells are blank, therefore when I use my =COUNTA(N7:N149) formula it gives me a total of 143 (149-7).

View 7 Replies View Related

Formula To Count Only Visible Cells When Using Filter?

May 15, 2013

I have a spreadsheet that includes a column with location names and a column with location numbers. What I need to do is count the visible unique numbers and names (seperately) in a certain column when using a filter. I have found the formula to count the unique values and a formula to count the visible cells, but not a formula that does both.

View 5 Replies View Related

Formula Needed To Count Cells With Data

Jul 12, 2007

formula to calculate how many cells in a column contain data of any kind. The data might be a number, a word, or even a symbol, such as "):>:)" for example. The range will change from time to time. For example, one day it might be a2:a4956. A few days from now I might delete a few rows from the top, such as rows 2 through 26, so then the range would be a2:a4931. Then I might add rows at the bottom with data that I need to be counted. I dont want to have to change the formula evertime I add or delete rows with data. I do not want the formula to count a blank space created by the space bar as "data." One formula I used sorta worked, but if the cell appeared empty, but had been cleard out by pressing the space bar instead of the delete key, the formula counted it as a cell with data.

View 9 Replies View Related

Formula To Count Number Of Cells That Meet Criteria?

Dec 18, 2011

I need to formula to count the number of cells that meet the criteria below,

Find the letters 'AT' in some part of the cell and a blank cell next to it...

Doing a different formula for each, doesn't bring out the correct figure.

View 3 Replies View Related

Count Visible Cells In A Formula That Contain Text Criteria

Nov 13, 2013

I currently have the formula =Countif(E5:E158,"YES"). This formula works great if when I dont filter, however, I need to filter through the data and I only want it to count the cells that have "Yes" when it is filtered, not just all the cells. I searched to forums and people keep referencing Subtotal() however that is counting all the cells and not pulling out the "Yes" inputs only.

View 2 Replies View Related

Count Used Cells Formula. Make Reference Static

Nov 5, 2006

I have a problem using indirect in a counta function. Basically, I want to count the number of used cells in a range. However, there would be insertions to the rows (using the insert row) on top of the range.

my function is now =counta(indirect(" events database"!"A"&M22&":A"&M500)

However, this formula returns an error. What have I typed wrongly?

View 9 Replies View Related

Excel 2007 :: Formula To Count Empty Cells On Worksheet?

Nov 22, 2012

Is there a formula to count empty cells on a excel sheet?

View 4 Replies View Related

Add To Existing Countif Formula To Count Cells If Criteria Is Greater Than Another

Sep 3, 2013

Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.

This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"

View 2 Replies View Related

Formula To Count Highest Number Of Continuous Cells With Data In A Range And Their Sum

Apr 1, 2009

I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.

Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.

I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.

View 9 Replies View Related

Formula That Adds Count But Saves Count So Can Clear Field

Jan 20, 2008

I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.

But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.

E.g

Large Parts Current Stock = 50

(enter in) Large Parts Used = 2

Large Parts Current Stock = 48

(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)

View 9 Replies View Related

Count If Formula: Count The Number Of Nhew Stores Each Quarter

Aug 21, 2006

going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....

View 6 Replies View Related

Formula To Omit "vs": Count All The Cells With Data In Sheet 1 Column

Mar 7, 2009

im trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted

View 5 Replies View Related

Count Formula (count Everything Excluding 1 In One Row, While Looking At Another Row To Determine The Group)

Mar 26, 2009

I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.

I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.

View 2 Replies View Related

Formula For Multiple Count - Without Subtotalling For Each Document And Then A Count

Oct 19, 2009

I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....

It looks something like this.....

Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A

Is there anyway to do this without subtotalling for each document and then a count?

View 9 Replies View Related

Count Formula: Count Total Entries In Columns

Feb 22, 2007

I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8

View 2 Replies View Related

Count Number Of Equal Cells With A Prefix In Col D And Insert Count In Col A?

Aug 7, 2013

I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

View 9 Replies View Related

Count If / Compare 2 Ranges And Count Where Cells In Same Row Differ

Apr 15, 2014

Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.

View 3 Replies View Related

Loop To Count Cells Until Criteria Met Then Restart Count

Mar 7, 2012

ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4

I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.

View 5 Replies View Related

Count If Formula: Populate That Count Below The Column Indicated Therein

May 19, 2009

I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.

View 4 Replies View Related

Count If- Formula That Will Count The Number Of Times

Jan 16, 2006

in writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).

On the table listed below I will return the data using a match.

From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed

To this table

A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43

View 11 Replies View Related

Count One Cell And Then Count 52 Cells Later...

Feb 26, 2009

I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....

I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.

What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.

After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.

Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?

View 6 Replies View Related

Count Cells Containing Dates (greater Than 2014) Based On Filtered Cells

Jun 24, 2014

I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)

I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.

Where it gets complicated is once i filter on the Zones;

I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.

I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -

=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))

View 8 Replies View Related

Count Number Of Cells In Column Per Month Ignore Blank Cells?

Jan 13, 2014

I have this formula which is counting the number of cells in a column that fall within each calender month.

However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.

In my workbook, B/C:133 have a formula =""

I will need the formula in column E to work if there is a formula that yields a "" in column B and C.

View 5 Replies View Related

Countif Statement: Count The Number Of Cells That Have A Value Greater Than 0 In A Range Of Cells

Jun 23, 2009

How do I count the number of cells that have a value greater than 0 in a range of cells?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved