Function That Will Find Value In A Cell And Copy It To Another Cell
Apr 27, 2009Function for G6 that will look for data in A6 and put results in F6. I have attached a sample woorkbook so you can better see what i am needing.
View 3 Replies
ADVERTISEMENT
Excel 2010 :: Find A Cell Within Range Then Copy That Cell To Another Location
Sep 26, 2013(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
Find Cell Value Copy Cell And Adjacent Cell
Aug 1, 2007i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies View RelatedFind Empty Cell In Range Then Copy Info In Cell Above It?
Dec 15, 2011I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
Find Cell, Copy Adjacent Cell Or Cells To Clipboard
Jun 14, 2007Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
Find Value, Copy Adjacent Cell & Paste To Corresponding Cell Of Another Found Value
Apr 5, 2008I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedMacro To Find Value In Cell And Copy / Paste To Other Cell
Dec 11, 2013I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
Find Text In One Cell Then Copy To Another Cell
Dec 9, 2009I'm not very good at programming with excel and ive looked every where for how to do this but i cant find it ....
View 9 Replies View RelatedFunction To Find The Address Of A Cell
Dec 8, 2005I want a function that allows me to enter a range and then returns
the address of the cell with the minimum value. It is the Address I am
interested in, not the value.
Insert Cell Name In FIND Function
Dec 13, 2013Is it possible to insert a cell refenece into the FIND function.
So, replace JAN-2013 with Sheet1 cell A1
Selection.Find(What:="JAN-2013", After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Format Row By Using Find Function Of First Cell?
Feb 5, 2014I have bunch of data in the first column but there is always an identifier in this data at different location within each cell of the column. I am thinking the best way is to use the Find function. If true, then format the whole row.
For example: starting in row 10, I want the macro to look in A10, find "AFL" and if "AFL" is found in A10, then format row 10 by highlighting it yellow. Otherwise, highlight it red.
Can Use Cell To Find Workbook Name In VLookup Function
Jun 23, 2012what I am trying to do but I'll give it my best shot with examples.
A1 = date
B1 = drivefolder[A1.xls]sheetname'!cell
Lookup Function - Find Value In Column For Value Choose In Cell
May 28, 2014I have this issue where I get an #N/A error when I i run a VLookup in cell H7. I have posted the worbook.
I want to find the value in column D for the value you choose in cell G2
Excelforum.xlsx
Find And Replace Function Using Cell References And Wildcards
Mar 29, 2012Any way to use a find and replace function involving a cell reference. I have a spreadsheet with ton of junky text burying information that I want. Here is a simplified example
A B
Book 345353hg dgdgsdgfd fff Book belongs to Jim
Sneaker fdg4 Sneaker is worn by Jan
Gum dfg s d e te4345Gum tastes great
Cake jklsjflsjfjikCake smells delicious
The pattern is that the A1 text appears in the B2 text. What I want is
Find *A1
Replace with blank
Find *A2
Replace with blank
and etc.
So that in the end, I get this:
B2
belongs to Jim
is worn by Jan
tastes great
smells delicious
I've looked at the functions of find, replace, substitute, left, and right and I can't seem to find the right one to do what I need.
Using FIND Function In Macro To Replace Value In Adjacent Cell?
Aug 10, 2012I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
Find Function Where Search Criteria Isn't Exact Match For Cell Contents
Dec 19, 2011I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
Macro Function For Copy Cell Value To Other Worksheet
Apr 21, 2009I have one excel file having two sheets viz "DailyRecd" and "MasterList". I need to copy some cell value from "Daily Recd" sheet to "MasterList" sheet using macro-function. A sample Excel file attached for easy reference.
View 2 Replies View RelatedConditional Formatting: FIND Function? (get Cell A2 To Fill Red When Cell A2="Public" And A1 Contains "(P)")
Jul 1, 2009Cell A1: International Studies Academy (P) 9-12
Cell A2: Public
Is there a way that I can get Cell A2 to fill red when cell A2="Public" and A1 contains "(P)"?. I can't seem to get a formula to work yet.
Find Min Then Copy Cell Content
Jul 1, 2009I have a list of values that are the following:
Column A: City Name
Column B: Distance to destination
Is there a command to find the minimum value in Column B and then copy the corresponding city name into a cell of my choosing.
Find And Copy Last Cell Value In Columns A And B
Mar 30, 2014Problem: Unable to retrieve last cell value in both columns A and B with the following formula.
Range("A2:B2").End(xlDown). Copy
Presently this only finds the last value in column A and copies that value.
Would like to know how to modify/change the range to look for the last cell in both columns A and B?
Find Last Cell In A Row And Copy Data
Feb 10, 2009I am looking for a macro to do the below
copy range b2:b8 from sheet 2
find the first empty cell on sheet 1 row 2
paste values into there
Find Locate Cell And Copy 1 Row Below
Aug 31, 2006I have a spreadsheet formed from a text file.
I want to search for each instance of "DOG" in column A, and copy the row below it and then paste that entire row to a new sheet called DOG. I can then autofilter and use a pivot table on the DOG sheet.
I cant just use an autofilter, because the row below can and sometimes does appear elsewhere in the spreadsheet, but refers to something else. It is all because this is an imported text file.
I have attached the spreadsheet to show you what I mean.....
here is the code I have so far, modified from another thread I posted.
Sub dogs()
Dim rd As Worksheet, dg As Worksheet, i As Long
Dim fRng As Range, Crit
Application. ScreenUpdating = False
Set rd = Sheets("Pets")
Set dg = Sheets("Dog")
The attached is a very cut down version of my spreadsheet...
Find Range With Value X And Copy To A Cell
Feb 13, 2007I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 Replies View RelatedFind Cell Value In Another Workbook & Copy
Feb 14, 2008What I have is a collection of about 500 .xls files that I want to import into a single worksheet in a new workbook, but I only want to bring in specific cells from the source sheets which are unfortunately not always in the same row numbers.
I have found this link on loops:
http://www.ozgrid.com/VBA/loop-through.htm
Which looks like it will do the work of digging through each workbook in a certain folder, but do I need to further specify a sheet within the workbook once it's opened in that loop code? Even if there's only one sheet in each source workbook? The sheets are named differently in each workbook, so that may be a problem.
Now the really complicated bit (I think) is the conditional stuff. Each source sheet is three columns (A, B and C) and I want to import the string (some will be numbers, some will be text) from the C column to a single row of the destination sheet, but only if the string in the source's B column matches what I'm looking for. There will actually be a few dozen of these conditional searches based on different strings from the B column, but if someone could just show me how to do it for a single string, I can expand that to all the other searches I need to do.
Let's say the search term is 'Application ID,' how do I look through the source worksheet for that string in column B and if I find it bring the string from column C on the same row into my destination sheet?
Find Unique Cell Then Copy To Other Sheets
Aug 18, 2009Look up a match on sheet1 from individual cells from sheet2, and if match copy and paste to sheet3, and i need this to be done for every cell in sheet2. Sort of a CTRL-F type of deal but for about 3000 individual cells on sheet2. The sheet1 contains about 10 columms with about 10000 cells all together. so to do this individually its just not posible.
View 5 Replies View RelatedFind Cell Content And Copy Row Into New Sheet
Apr 7, 2014I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm
Lookup Find If Copy In Next Blank Cell
Mar 4, 2008I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12.
On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
Macro To Find A String And Copy It To Next Cell.
May 13, 2009find a string and copy certian string to next cell i have tried something which can copy but unforunately that is copying whole cell not certian string.
I have data of 500 rows and i have data till A,B,C,D and E.Please ignore all the other rows which are of no use except E in Column E i just need Reference : A0000000:1 to be copied to next column beside to it that means in Column F.
Find The Blank Cell And Copy The Fixed Value
Jun 23, 2009If cells in column J are not blank, values in column K must be copied from column I.
If not, i.e. cells in column J are blank, values in column K must be copied from column I + the fixed value in cell $C$2.
Can't get "if" nor "notblank" formula working.
VBA Cell Value Copy In Variable And Find Replace?
Feb 9, 2013I'm trying to work on a macro that will copy two cell ranges (name of current month and prvious month) from one location, store it as a variable and use that variable to find replace similar text string in another tab. Below is my code which is not changing the values in another tab...
Dim OldMonth As String
Dim NewMonth As String
Sheets("X1").Select
[Code]....