I would like the Spreadsheet to Hide rows with less then 50 Quantity on Column K.
I have attached the Inventory List.
If I can create a Button that will automatically Hide all rows with a Quantity less then 50 on Row K that would be great!
I would like to hide rows (A17:A180) based on the value in the cell. If the value in a specific cell is "X", hide the row...if anything else is in the column's cell (A17, etc), show it.
View 6 Replies View RelatedI'd like to create a command button Macro that will hide all the rows on a given worksheet where the values in a given column equal zero. I'd like to do this to make printing more manageable, so that only the relevant rows (with value>0) print.
View 9 Replies View RelatedI'm looking for a macro which hides a row when the value of the cell in the E column is 0, but makes sure it's NOT hidden when the value is 1.
(For example; the value of the cell E5 is 0, so row 5 is hidden. The valude of E8 is 1, so row 8 remains).
I've been trying the following code, but it doesn't seem to work for me:
Sub EmptyTest()
If E12 = "0" Then
Rows("12:12").Select
Selection.EntireRow.Hidden = True
End If
If E13 = "0" Then
Rows("13:13").Select
Selection.EntireRow.Hidden = True
End If
...
End Sub
( ... = and so on )
But that doesn't seem to work; it also hides the rows which have the value of 1 in the cell in the E column.
( The value of the cells under E is set by a formula to the value '1' or '0', not false or true or any of that sort. )
I am trying to have a checkbox that will hide any row between 6 and 300 say IF column P of that row that is empty, or does not contain the letter "Y", whichever is easier. I have found a bunch of different code snippets, but most hide a predetermined row range, and I need this to be dynamic.
If it can also expand the range automatically as I add more rows to the spreadsheet, that would be even better, but not necessarily required.
I wrote some simple code to work through a number of rows and hide the rows which contain a value of "XXX". For some reason, when the code hits the line denoted with? it hides the first row of "XXX"'s but then starts all over again at very first line of code outside the loop.
Sheet1. Range("start_1").Select 'cell c53
Do Until ActiveCell.Value = "EOF" 'cell c266
If ActiveCell.Value = "XXX" Then
Selection.EntireRow.Hidden = True '????
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
I've got a macro that looks at the value of the cells in a range and if the cell value is zero, hides the correspoinding rows. It does take a bit of time to run with a 1000+ rows in the range, and I have more than one range.
Would someone mind having a look at the code and see if there is a more efficient way to run this?
Sub HideRows()
Application. ScreenUpdating = False
On Error Resume Next
With Range("EV_Amount_Range")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
Application.ScreenUpdating = True
End Sub
I am trying to implement the following:
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
[code].....
After the user selects something using the validation list in cell F38, the macro should check in column Q in the rows 44 till 425 for "hide". For each row in which it finds "hide" the entire row should be hidden.
I have the code below but it does't work yet. It calculates for ages and afterwards only the first 2 rows of the 381 are hidden (probably because the third row is not "hide").
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As Range
Dim ThisCell As Range
Target = Range("F38")
Set MyRange = Range("Q44:Q" & Range("Q425").End(xlUp).Row)
For Each ThisCell In MyRange
If ThisCell.Value = "hide" Then
ThisCell.EntireRow.Hidden = True
End If
Next ThisCell
End Sub
I have read several related threads and tried to adapt their answers to my application with no success. I am trying to write a macro that will hide rows based on that row's value in a certain column. Specifically, column AB contains sums and if a sum equals 0 I want to hide that row. The sums start at AB5 and go to AB118 but there are 4 gaps in the column at rows 25, 47, 70, and 94.
View 9 Replies View Relatedare there means to make visible the hidden rows and columns on all sheets
when the workbook is opened?
I am trying to hide rows based on the contents of column BS. It the cell is empty (not just zero value, but completely empty of all formulae), then I want to leave it unhidden, then if the cell value is less than the value in cell E2 I want to hide the row. This code doesnt seem to like the first if...then next i
Sub hiderows()
Dim i As Long
Set v = cell.Value("$E$2")
' Turn off screen refresh for speed
Application. ScreenUpdating = False
' Get last row Col BS
For i = Range("BS2000").End(xlUp).Row To 15 Step -1
If IsEmpty(Cells(i)) Then Next i
ElseIf Cells.Value(i) < v Then Rows(i).Hidden = True
End If
Next i
' Turn on screen refresh
Application.ScreenUpdating = True
End Sub
What I have is a sheet where the cells in range A9:A3508 have a formula that evaluates to blank if any of a variety of conditions are not met (date falls outside desired range, does not meet filter criteria, etc.) and a number if these conditions are met. What I am looking for is for all rows in that range where A is blank to be hidden (not deleted), and for this to automatically update every time A changes (meaning that if A goes from blank to a number, that I will need that row to become unhidden again). I have considered just recording the macro and calling the function with a button, but as this is for external users, some of whom may be unfamiliar with Excel, I would rather keep it as clean, simple, and automatic as possible.
View 5 Replies View RelatedI have to show a report with 3 columns= Physician names, Section and number of procedures. The problem is that physician name repeat several time according the section they order and I need to show in the first column each Physician name just one, see attached picture.
I did try to use conditional formatting and advance data formatting but not working properly for me. I was able to use =A2=A1 conditional formatting and hide duplicates physician names but shows only the last row of the duplicate names no the first one.
How can i hide and unhide column and rows using checkbox in the excel.
detail price qty amount
chair 1000 1 1000
some time i just want to see only the amount or some time i want to see the qty, how can i hide and unhide row or Column
In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
Sub NotCurrentHide() ...
I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; http://www.ozgrid.com/Excel/outlining-protected.htm. How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.
View 2 Replies View RelatedIn one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies View RelatedHow would I write a macro to hide a range of rows If a cell value is zero, then do the same for five additional ranges of rows?
In my words:
If AT214=0, hide rows 214 to 244
and
If AT245=0, hide rows 245 to 278
and
If AT279=0, hide rows 279 to 311
and
If AT312=0, hide rows 312 to 344
and
If AT345=0, hide rows 345 to 377
and
If AT378=0, hide rows 378 to 410
What i want to is add some code into a worksheet where it hides rows 5:35 and shows rows 37:47 if the value of cell C3 = "Races" but shows rows 5:35 and hides rows 37:47 if the value of cell C3 s not "Races".
View 2 Replies View RelatedI would like to hide all rows under a given cell value.
For example, if Range("BJ9")=9.
I want to hide all cells in range "A10:A56".
More generally, I would like to hide all cells Range("A" & i) for i=Range("BJ9").Value To 256.
Is there a way to hide a certain amount of rows (122:136) when cell R116 has no value, but with not having to enable macros?
View 4 Replies View RelatedI need a macro that hides the rows where two cells individually and unrelatedly has a cellvalue=zero.
I have pasted an example of what i mean. The rows coloured needs to be hided.
CompanyRatingMicrosoft0Apple1504000IBM200Dell0015
I've got a pivot table with about 40,000 rows. I want to be able to type a part number in cell A2, and hide all rows from row 7 down that do NOT contain that number in column A.
The idea is to show only the data for the number entered, but by typing the number rather than using the checkboxes to select it.
I am using windows 7, and excel 2007. I want to hide rows bases on a value in cell G2 which is a date field
Example, if G2 is greater than 11/16/2011 then hide rows 1969 through 2032.
With a piece of code that will hide an entire row if a cell value in that row does not equal the cell value of another row.
Example
Cell d3 = Feb 2012.
Range C5:c252, = a mix of Feb 2012 and Mar 2012.
I want to hide all the Mar 2012.
However if Cell d3 = Mar 2012 then the range C5:C252 will also = Mar2012
I want to see all the rows within that range.
I Have Values in Cells A29 thru F45. I want to hide the entire row if the value in Column C is the same as the value in Column C in the row directly above, i.e, if the value in C30 is the same as C29, Row 30 should be hidden.
Based upon the logic built into the table values. if the value in C30 matched C29, all of the values from C30 thru C45 would match C29 with a need to hide all rows starting at Row 30 and then thru row 45. The values could begin repeating at Cell C31 with the value in C31 matching C30 with a need to hide from row 31 thru 45.
I am thinkin a Selection.AutoFilter type of macro?
I am trying to auto hide rows in a spread sheet. the start row will always be 55 and the end row will be 55 + the value of cell A38 in sheet titled "Main".
View 2 Replies View RelatedIn this example on Sheet 2, I'm trying to hide rows 1-6 if 'E6' is 0, and hide rows 15-26 if 'E18' is 0. These cell values are equal to the same cell in Sheet 1.
I've tried different codes I've found online, but I'm not very experienced with VBA so I can't get it to work. I can get rows 1-6 to hide, but it doesn't do it automatically whenever a zero is inputed into Sheet 1. It only works if I enter something into another cell on Sheet 2.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("E6") = 0 Then
Rows("1:6").Select
Selection.EntireRow.Hidden = True
[Code]...
I'm using column A as a reference. My data starts in cell A3.
Whenever theres a zero in any cell in column A I would like that row to hide.
If the row was hidden and the value changes to any number greater than zero I need the row to unhide.
I can record two macros for the hide/unhide part of this but I dont understand how to run them based on cell value.
