I want the value of the first column in the active row in a ListObject. I've tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).Range.Address,
but don't know how to refer to the first column in this row. I've also tried
Code:
MsgBox ActiveCell.ListObject.ListRows(ActiveCell.Row).ListColumns(1).Range.Value ,
but it returns an error message.
I am looking to create a loop in a ListObject object that does calculations depending on the value of the current certain row in a column. This is the code I have so far:
[Code]....
I am having trouble with the loop; as you can see, the nested for loop will go through all the 'weight' in the column before going to the next 'grade'. I just want the loop to reference the same 'weight' that the 'grade' is on and move on. But I am not sure how to reference each 'weight' as I progress through each 'grade' in parallel.
I am aware that I can do this with regular cell references:
[Code] ......
but I am more interested in learning on how to work with the ListObject class.
I'd like to create a macro that will do this trick:
Only activates when I select a cell in a ListObject.When activated: selects the entire first row of that Listobject,and only selects the cells in the range of that Listobject.
Because I have more Listobjects, I'd like to have one code which works for all of them.
i am trying to sort a table in Excel 2007. I am getting a syntax error that i don't understand as the arguments for the sort method are optional.
Sub SortTable()
Dim table As ListObject
Set table = ActiveSheet.ListObjects("Table_INDEX")
Dim columnToSortBy As Range
Set columnToSortBy = table.ListColumns(1).Range
With table
.Sort.SortFields.Clear
.Sort.SortFields.Add (columnToSortBy, xlAscending)
With .Sort
. Header = xlYes
.MatchCase = False
.Apply
End With
End With
End Sub
I am using Excel 2007 and I created a table (i.e., listobject) using the macro recorder as follows:
Code:
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$3:$J$50"), , xlYes).Name = "MyData"
Questions:
1. How do I delete this table via VBA?
2. How would I check to see if this table already exists so it follows this logic:
If "table does not exists" then
'create it (using the line of code above)
End If
If only 1 row is selected, it works fine, but if I've selected multiple rows it continues forever. I want to create a row in my ListObject based on the number of selected rows.
Code:
Sub CreateRow()
Dim rRow As Range
With ActiveSheet.ListObjects(1).ListRows
For Each rRow In Selection.Rows
.Add (rRow.Row - 2)
Next rRow
End With
End Sub
I'm trying to copy a whole bunch of tables with identical layout to a master table, so I can create a whole bunch of pivot tables that include data from ALL the various tables. The source tables MAY be filtered, and I can't work out how to copy them easily while also INCLUDING any hidden/filtered rows while at the same time leaving any filter settings on the source tables intact.
If I use something like range("Table1").Listobject.DataBodyRange.Copy then it only copies the VISIBLE rows.
But I want ALL rows to be copied to a master table.
1. I don't want to unfilter the sources tables, because users might still want the source tables to remain exactly as the user filtered them. (However, it doesn't matter if the DESTINATION list is filtered or not). I realise that I could copy the entire sheet to a temp sheet, then unfilter any tables on that sheet and THEN copy these to the master list. But wan't to know if there's a simpler way.
2. I DON'T want to use SQL to create a pivot table directly from the tables, because the tables will have further information added to them from time to time, and so if I use SQL to make a pivot directly from them, I'll have to recreate the pivot cache using that SQL query each time, which might muck up the settings in any existing pivot tables. I realise that I could use SQL to copy the data to a 'staging area', and just point the pivot table at that.
3. I can't use PowerPivot, because its not installed in this environment.
I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
View 3 Replies View RelatedI am looking for a way to have the active cell row and column (standout). I did have it highlight but as users tried to highlight certain cells the active highlighting of the rows and columns would erase the color. So they are asking for something that can take its place with an on and off button to it.
View 5 Replies View RelatedI found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range)
Dim i As Long
Cells.Interior.ColorIndex = xlColorIndexNone
If Application. CountA(Target.EntireRow) 0 Then
i = Target.Row
Else
For i = Me.UsedRange.Rows.Count To 1 Step -1
If Application.CountA(Me.Rows(i)) 0 Then
i = i + 1
Exit For
End If
Next i
End If
Rows(i).Interior.ColorIndex = 6
End Sub
Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedI need a VBA code to do the following:
- The active cell i.e. the selected cell can be anywhere on row 11 (this is a merged cell with row 12 but I can unmerge if causes problems)
- The filter needs to be applied to the rows below the active cell (at most this will be about 10,000 rows below)
- I need to filter for non-blanks only
- Above row 11 there is one blank row and a number of filled rows; these need to be ignored i.e. excluded from the filter
- In this case I will need the filter to work on the cell with 'France Trade Product' in it
- The filter would need to hide rows below this cell except for row 16 where a non blank is found
FilterCapture.JPG
In my macro, I need to, from any column, move the active cell to column A, while remaining in the same row.
View 2 Replies View RelatedIs there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies View RelatedI am trying to perform a sort based on the ActiveCell.Column
I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data
I tried
Header:=xlGuess as well as
Header:=xlNo
Same result
What am I doing wrong?
Thanks
-marc
Private Sub comp_mySort()
Selection.Sort Key1:= Cells(1, ActiveCell.Column), _
Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
i try to create vba code, which will filter blankc cell in column where is cursor. this is my try, but it doesnt works.
View 4 Replies View RelatedI try find function or create macro witch makes move in to the specified column after clicking on button. But this move will be in the same row, where i was last active.
View 2 Replies View RelatedI use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies View RelatedI am trying to count only visible cells where column AB = Active.
This is what I am currently have .
SUMPRODUCT(SUBTOTAL(3,AB2:AB1000),AB2:AB1000, "Active"))
Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
View 2 Replies View RelatedI'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View 3 Replies View RelatedIs there a way to highlight the row and column of the active cell? The highlighting will move as the active cell is moved around the spread sheet. I have a newbie manager that is bugging the pea-turkey out of me! He wants to be able to easily see where he is within some of our sheets while he is in a vehicle or outside on a job site...seems like an "accessibility" type issue, but can't find anything in Excel "Options."
View 5 Replies View Related