I have a spreadsheet that I receive with a column containing some numbers. It arrives in genearl format but as part of a macro I format Column "C" to 2 decimal place numbers.
This works fine but some of the cells are completely empty. I need to have those empty cells populated with "0" which will of course display as 0.00 because of the formatting.
I have this example data range:
foo 3
goo 2
blu 5
I'd like to be able to chart this (clustered columns for instance) but when I delete value 2 from goo, I'd like the chart to skip that row altogether and not display "goo" and a blank space as its value. I only want foo and blu columns showing.
Is that possible?
CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83
[Code]....
left side pivot created in vb 6.0 & right side pivot table created manually in excel.
i want to generated pivot table using vb 6.0 same as right side pivot.
Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),
[Code]....
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 Replies View RelatedHow I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
Although I have removed the original numbers in the main area (I12 - AM12), there are still values in the fields I11 - AM11 that just won't go away. These formulas merely sums up the columns below as far as I can see so I can't figure out how come the values 101, 98, 9o etc aren't '0' since there are no values to add anymore..
NB!Not sure if the formulas will be in norwegian or if they change based on language settings but think you will be able to figure them out regardless..
('HVIS'=IF)
I have a list of company names and I need to find the duplicates. Of course pivot table finds the exact matches, but how do I find duplicates when only 1 character is off. Like punctuation or "s" or a mistype of a single character?
Example:
Jo Blo inc
Jo Blo inc.
Jo Blo inc
Jo Blo icn
Joe Blo inc
Jo Blo inc
I have a workbook that is used to calculate sales & commissions for our sales reps. The majority of the worksheets are "RepLast, RepFirst". All of these Rep worksheets include an identical format. I need to add another sheet which grabs the total quantity of products A for each rep and sums them on the new sheet. And repeats the process for products B to Z.
Is there a way to do this other than longhand naming each rep and then the field in the worksheet? We are regularly adding new reps (and losing some periodically), so I would prefer to not have to regularly update the longhand formulas (i.e. ='RepName1'!A25+'RepName2'!A25+'RepName3'!A25...etc) as that would seem prone to introduce calculation errors.
I have a rather unique problem with a new workbook I have created and it only affects 2 sheets out of the the entire thing.
The sheet is driven by a name:
Schmoe, Joe
Diddly, Bill
These names are picked from a drop down list. When a name is picked it autofills other fields using the LOOKUP command:
=IF(A3="","",LOOKUP(A3,Roster!A2:A181,Roster!C2:C181))
By now I think this is pretty straight forward and works wonderfully well for the other 50+ sheets. However I have two employee names where the second of the two (Diddly, Bill) takes and autofills the fields with Schmoe's information. The only thing I can randomly pick up is perhaps the employee numbers are too close:
00868
i have created a form hich dumps into a database.
There are some mandatory fields which need to be filled in by the user on the form - how can i flag these up at the end of the form - with a message box which says - "cant complete - feild "" "" "" are missing "
I had a spreadsheet with 45 fields, endind with a SUM in field 47.
I've inserted new fields, exactly 531. The SUM doesn't know that and still thinks that I have 45 fields:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44)
How do I add automatically the value 3 to F44, continuing to add the value 3 to 531? So I want:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44;F47:F49; F52; ETCETERA)
I am trying to figure out a solution and wondering what would work the best. Here is my situation. As an example, I have one big database with fields such as:
Item# Date Qty Price Cost ect...
1 3/4/08 3 $9.00 $7.00
2 9/5/08 5 $8.00 $6.00 ect....
This continues for up to 1000 lines from a database. I have this is a tab called "Database". From the data in the tab "Database", I want to be able to create 4 seperate reports.
The first report might only have the columns "Item #" and "Date".
The second report might only have the columns "Item #" and "Qty".
The 3rd with only "Item #" and "Price"
The 4th with only "Item #" and "Cost"
If I create a new spreadsheet called "Sales" and create the following:
ColA = Item #
ColB = Date
I'm in the process of writing some SQL in excel and normally when I want to specify a field name as another name say wx22 as Part Number i just use square brackets eg
"select wx22 as [Part Number]"
I have a field that needs to be split into a set amount of columns depending on a delimited character. This works fine with all of your standard delimeted characters such as / or ,. The only issue is I have a field that has a delimiter of the square symbol . How would I be able to insert this symbol into a input box. When I try and copy the symbol from excel it does not show in the inputbox. I also tried to copy it from the sybol that can be generated in word and that just pastes as?. I was wanting to know if there is anyway this can be entered into a variable so that I can delimit the data using this symbol. If I have to use a ascii value I don't mind I just cant find a ascii code for it.
View 5 Replies View RelatedI'm creating a spreadsheet that will have two types of data fields: hex and binary, with pairs of corresponding values for each record in the worksheet. I need to be able to edit the hex values and have the binary values update correspondingly and vice versa, on the same worksheet. I can't figure out how to create such a two-way feedback mechanism.
View 5 Replies View RelatedI have two worksheets. Each have a common value in two cells. An ID and a currency amount. One worksheet also has a payment date. I need a worksheet that combines the two, along with the payment date.
View 3 Replies View RelatedSo, I've created a pivot table and need to use one of my values in both the row and value fields. I haven't seen a way to easily do that so far. Is there something I'm missing or is this not possible with Excel (yet)?
View 3 Replies View Related