I have a list of company names and I need to find the duplicates. Of course pivot table finds the exact matches, but how do I find duplicates when only 1 character is off. Like punctuation or "s" or a mistype of a single character?
Example:
Jo Blo inc
Jo Blo inc.
Jo Blo inc
Jo Blo icn
Joe Blo inc
Jo Blo inc
I have two worksheets. Each have a common value in two cells. An ID and a currency amount. One worksheet also has a payment date. I need a worksheet that combines the two, along with the payment date.
View 3 Replies View RelatedI have a column where a lot of the fields match. What I want to do is set up a formula where all of the matching fields are numbered (1,2,3,etc). For instance:.......
I want the numbering to read the matching items and count them (not a sum but rather just a numbering/ordering column)
This is what I would want it to look like:...........
Example:
Order Number from VendorOrder Number from SupplierTracking Number from Supplier12345123451ZABCD13456134561ZBCDE134561ZCDEF14567145671ZDEFG1456714567
In these three orders, the first order nubmer has a 1-to-1 relationship with a single tracking number. In the second, there are two different tracking numbers associated with one number from column A. In the third, there is only one tracking number but three different lines of the same order number that need to be updated with it.
The question is, is there a way to line up data fields head to head even when there are variable inputs like this?
colA colB
ABC 123
ABC 456
ABC 789
ABC 789
ABC 789
I Need to write a VBA that will make a selection based on a couple conditions. example: if 123 is in the range of ABC and 789 is as well, i need it to select or change the color of the rows that 789 is present
I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 Replies View RelatedThe order of column A can not change as I need to find the matching row of information and transfer that information
Not all values have a matching row.
Rows are match on PCN number but need all the values in the rows
I have attached a workbook with starting and desired end results
I have a large list like this:
A 1
B 2
C 3
D 4
E 5
I need only values pertaining to C and D. How do I sort the columns so it becomes like:
C 3
D 4
The rest I don't need.
I've been racking my puny brain for an hour trying to figure this out. Basically, my problem is with the last 2 invoices listed. If one invoice has "PO CLOSED" on it, I want all other invoices on that same PO to say the same thing. Surely I can do this with a formula or conditional formatting, but I cannot think of how.
PO #Invoice #DateInvoice TotalDept.ActivityElementPO AmountPO Amount RemainingPO Status0707955289651/12/09$812.9075105854035$2,960.28$59.380707955459806/15/09$667.2475105854035$2,960.28$59.380707956486827/7/09$812.9075105854035$2,960.28$59.380707955584669/29/09$607.8675105854035$2,960.28$59.380719750913336/18/09$947.7975105853305$5,000.00$3,117.210719750915917/17/09$935.0075105853305$5,000.00$3,117.21PO CLOSED
I need a formula. Probably Vlookup. I'm having a LOT of trouble trying to figure out how to "phrase" the formula so let me explain what it is I'm trying to do. If a cell in Sheet 1 Column AS and a cell in Sheet 2 Column B match exactly, I want the cell in Sheet 2 Column C that is in the same row as the matched cell in Sheet 2 Column B to be copied into Sheet 1 Column BB in the same row as the matched cell in Sheet 1 Column AS.
For example, if cells in S1 Column AS and S2 Column B both have the name "LOS ANGELES" then "KLAX" will be copied from cell in S2 Column C (in same row as "LOS ANGELES") to S1 Column BB (in same row as "LOS ANGELES").
CountryHourDataTotalData
Austria - A10Sum of SeiA51CountryHourSum of SeiASum of SeiT
Sum of SeiT4.88Austria - A10514.88
1Sum of SeiA561562.83
[Code]....
left side pivot created in vb 6.0 & right side pivot table created manually in excel.
i want to generated pivot table using vb 6.0 same as right side pivot.
Set PRange = ws1.Range("R1:Y" & finalrow)
Set PTCache = wb.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=PRange)
Set PT = PTCache.CreatePivotTable(TableDestination:=ws2.Cells(1, 1),
[Code]....
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1
data
data
data
data
p2
data
data
data
data
[Code] .....
needs to become:
p1
data
data
data
data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an x next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say Brown Corp. and the bank side might say Brown Corporation. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a x to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1:
50025
50026
50086
Table 2: Considering that name, age and location is each in separate cell
50025JohnSecond25Location 1
60085EmilyThird 20Location 2
45454Wilhelm Fourth35Location 3
10000RoseFifth 60Location 4
50086JohnySixth 45Location 5
65501JacobSeventh18Location 6
50026Jackie Eighth22Location 7
And the outcame should be that it finds the value from Table1 in Table2 and copy's information in Table 1 like this:
50025 JohnSecond25Location 1
50026 Jackie Eighth22Location 7
50086 Johny Sixth 45Location 5
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
Although I have removed the original numbers in the main area (I12 - AM12), there are still values in the fields I11 - AM11 that just won't go away. These formulas merely sums up the columns below as far as I can see so I can't figure out how come the values 101, 98, 9o etc aren't '0' since there are no values to add anymore..
NB!Not sure if the formulas will be in norwegian or if they change based on language settings but think you will be able to figure them out regardless..
('HVIS'=IF)
I have a workbook that is used to calculate sales & commissions for our sales reps. The majority of the worksheets are "RepLast, RepFirst". All of these Rep worksheets include an identical format. I need to add another sheet which grabs the total quantity of products A for each rep and sums them on the new sheet. And repeats the process for products B to Z.
Is there a way to do this other than longhand naming each rep and then the field in the worksheet? We are regularly adding new reps (and losing some periodically), so I would prefer to not have to regularly update the longhand formulas (i.e. ='RepName1'!A25+'RepName2'!A25+'RepName3'!A25...etc) as that would seem prone to introduce calculation errors.
I have a rather unique problem with a new workbook I have created and it only affects 2 sheets out of the the entire thing.
The sheet is driven by a name:
Schmoe, Joe
Diddly, Bill
These names are picked from a drop down list. When a name is picked it autofills other fields using the LOOKUP command:
=IF(A3="","",LOOKUP(A3,Roster!A2:A181,Roster!C2:C181))
By now I think this is pretty straight forward and works wonderfully well for the other 50+ sheets. However I have two employee names where the second of the two (Diddly, Bill) takes and autofills the fields with Schmoe's information. The only thing I can randomly pick up is perhaps the employee numbers are too close:
00868
i have created a form hich dumps into a database.
There are some mandatory fields which need to be filled in by the user on the form - how can i flag these up at the end of the form - with a message box which says - "cant complete - feild "" "" "" are missing "
I have a spreadsheet that I receive with a column containing some numbers. It arrives in genearl format but as part of a macro I format Column "C" to 2 decimal place numbers.
This works fine but some of the cells are completely empty. I need to have those empty cells populated with "0" which will of course display as 0.00 because of the formatting.
I had a spreadsheet with 45 fields, endind with a SUM in field 47.
I've inserted new fields, exactly 531. The SUM doesn't know that and still thinks that I have 45 fields:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44)
How do I add automatically the value 3 to F44, continuing to add the value 3 to 531? So I want:
SUM(F2;F5;F8;F11;F14;F17;F20;F23;F26;F29;F32;F35;F38;F41;F44;F47:F49; F52; ETCETERA)
I am trying to figure out a solution and wondering what would work the best. Here is my situation. As an example, I have one big database with fields such as:
Item# Date Qty Price Cost ect...
1 3/4/08 3 $9.00 $7.00
2 9/5/08 5 $8.00 $6.00 ect....
This continues for up to 1000 lines from a database. I have this is a tab called "Database". From the data in the tab "Database", I want to be able to create 4 seperate reports.
The first report might only have the columns "Item #" and "Date".
The second report might only have the columns "Item #" and "Qty".
The 3rd with only "Item #" and "Price"
The 4th with only "Item #" and "Cost"
If I create a new spreadsheet called "Sales" and create the following:
ColA = Item #
ColB = Date
I'm in the process of writing some SQL in excel and normally when I want to specify a field name as another name say wx22 as Part Number i just use square brackets eg
"select wx22 as [Part Number]"
I have a field that needs to be split into a set amount of columns depending on a delimited character. This works fine with all of your standard delimeted characters such as / or ,. The only issue is I have a field that has a delimiter of the square symbol . How would I be able to insert this symbol into a input box. When I try and copy the symbol from excel it does not show in the inputbox. I also tried to copy it from the sybol that can be generated in word and that just pastes as?. I was wanting to know if there is anyway this can be entered into a variable so that I can delimit the data using this symbol. If I have to use a ascii value I don't mind I just cant find a ascii code for it.
View 5 Replies View RelatedI'm creating a spreadsheet that will have two types of data fields: hex and binary, with pairs of corresponding values for each record in the worksheet. I need to be able to edit the hex values and have the binary values update correspondingly and vice versa, on the same worksheet. I can't figure out how to create such a two-way feedback mechanism.
View 5 Replies View RelatedSo, I've created a pivot table and need to use one of my values in both the row and value fields. I haven't seen a way to easily do that so far. Is there something I'm missing or is this not possible with Excel (yet)?
View 3 Replies View RelatedI have a workbook with two sheets, one used for referance (Column A - Product SKUS, B - Product Description and C - Carton Quantities) - Sheet 1
The other sheet I would like to import incoming shipments. (Column A - Product SKUS, B - Product Description, C - Quantity Ordered and D - No of Cartons) - Sheet 2
What I need to do is find out how to get Excel to find and match up the SKUs in Col A and then dividing Sheet 2's column C by Sheet 1's column C to give the number of incoming cartons of each product in Sheet 2's Column D
I have a excel sheet with 3 columns. In column B and C there is either a number, or empty. If both for instance B1 and C1 is empty, i want A1 to automatically be filled in with the number 1. If there is value in one of them, then i dont want anything in column A.
View 3 Replies View Related