The else part is the part i cant get right.
Sub LabSumPTOHide()
If Sheets("Labor Summary").Range("A8").Value Like "Function*"
Then Sheets("Labor Summary").Rows("7:49").Hidden = True Else Sheets("Labor Summary").Range("9:15,24:49").Hidden = True
End Sub
I have got a macro (from Mr Excel's MVP) that hide certain cells according to assigned cell value
What I need is:
to hide certain ranges in different worksheets according to the assigned cell value in the first worksheet
if sheets1.cell A1= "hi" then
range (" goooo") in sheet 1.hide
range ("deeeee")in sheet 2 .hide
range ("faaaaa") in sheet 3.hide
the macro I had is :
====================================
====================================
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
If Target.Value = "hi" Then
Worksheets("Sheet1").Rows(2).Hidden = True
Else
Worksheets("Sheet1").Rows(2).Hidden = False
End If
End If
End Sub
I am building a sheet to display deadlines (rows) by project (columns). I would like to have it automatically hide the rows and columns based on the date of the deadline. If the deadline is today or 1 week from today the associated rows and columns should be visible, otherwise, I would like to hide them.
My table is A1:N9, with A1 being a blank, row names A2:A9, and column names B1:N1.
I have written a VBA procedure which is supposed to hide unneeded columns (based on the a number entered in a certain cell. This is working so far. Since I need to sum only the visible cells in a row i need to clear the contents of a range of cells if they will be hidden. Unfortunately the code i have written runs only to the ClearContents and then starts over from the beginning. If i take out the .clearcontents and put .Select for example instead, the code runs perfectly.
Here is the
Sub worksheet_calculate() 'Hide columns that are not needed
Sheet1. Unprotect
Application. ScreenUpdating = False
Dim i As Integer
Dim r As Integer
Dim s As Integer
Dim rngRange As Range
i = 2
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
In the attached file i have multiple tables for different types of conservatory roofs (16 of them in total). The ranges at the top and side relate to milimeter measurements and the data in the middle relate to the price for that sized conservatory roof. The table works where the two ranges intercept each other. I have a formula to do this for one of the tables only. What i would like is a way of choosing which type of roof to use (i.e. which table to use) and then to be able to input the measurements and the price to be displayed. All of this needs to be done in one query so its as user friendly as possible. i've had is to use a pivot table, i feel it is not possible to use a pivot table to do this sort if thing after research into them, although i am un-familiar in the making of them
View 4 Replies View RelatedIm trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
I have set following ranges:
[Code] ....
I use above rngData1 as follows:
[Code] ....
How can I use all above ranges in For Each statement?
For example For Each rngRow In .Range(rngData1+rngData2+rngData3+rngData4).Rows
I am trying to create an IF function and how to create it for multiple ranges. The for the following criteria is what I am trying to work with: If a checking balance is $500 dollars or below return "low", If it is between 500 and 2000 return "Medium", and IF greater than 2000 return "high"
View 2 Replies View Relatedlook at the formulas in column cells G28..G33 and tell me where I went wrong.I have attached the file.
View 2 Replies View RelatedI am trying to combine three IF formulas that depend on ranges that vary. I think the attached sheet does a much better job of explaining what I am looking for than I can do.
View 3 Replies View RelatedI have a list of grade from 2~4 (i have long list but for sample i made it short). I want to get average of all grades one by one as well as by making some groups. Like 2,3, "2~4" (all groups) then "3~4". All the things were going nicely with a drop down menu. But when i put average on grde "3~4" only then the problem occurred. Although I've done my work but still I think there must be some improvements.....
View 6 Replies View RelatedQuick question: When using "With" is it possible to specify 2 ranges, or will I need to do 2 different with blocks? The reason I say not using Union is because I need my ranges seperate. I run 1 set of commands on Range 1, and 1 set of commands on both Range 1 and 2.
View 3 Replies View RelatedI am trying to use an ActiveX CommandButton on Sheet40 to do the following:
Sheet40 (E31:AN39) = sum of (E31:AN39) for sheets 6-15 PROVIDED that cell D3= "y" in those sheets
So the steps are:
(1) Among sheets 6-15 select those in which cell D3 = "y"
(2) Set the range of (E31:AN39) in sheet40 to the sum of the same range in the selected sheets
ie cell E31 = sum of cells E31 in selected sheets... cell E32 same... cell AN39 same
I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
View 2 Replies View RelatedI am getting a NEXT without FOR error message when i try to run this code. This is the portion of sub im having trouble with.. been trying to work it out but to no avail. I thought that i might have to do Next Ccell, though I got the same error.
View 2 Replies View RelatedI am trying set up my spreadsheet so that when a number is put into one column. The next column is filled with a number that will correspond to the other number specified from a range of data.
Distance Sheet no.
55
68
93
135
186
So in the sheet No. column I want it to read the number in the Distance and put in the Corresponding sheet number.
So if:
Sheet 1 is : a distance of 1 though 20
Sheet 2 is : a distance of 20 though 40
Sheet 3 is : a distance of 40 though 60
Sheet 4 is : a distance of 60 though 80
Sheet 5 is : a distance of 80 though 100
Sheet 6 is : a distance of 100 though 120
Sheet 7 is : a distance of 120 though 140
Sheet 8 is : a distance of 140 though 160
Sheet 9 is : a distance of 160 though 180
Sheet 10 is : a distance of 180 though 200
How can this be automated without writing a ton of nested if statements.
This is an example but in reality I have 29 "sheets" with different ranges to separate.
Countif: Is there a way to have a single criteria (a persons name) and multiple ranges example: a6:a10 c6:c10 and recieve the sum of that criteria and ranges?? I know there is I just cant get it.
I need to count a persons name entered in multiple ranges (cells or areas) on the same worksheet. I cannot make one big range because i will need to do the same for the b6:b10 but for a different "need" the a colum and c colum bieng "completed" the b colum bieng "not completed". I have tried =countif(a6:a10 + c6:c10, cell_with _persons_name) and for obvious reasons that wont work,
I have this piece of code which just copies every 3rd cell in column B from sheet1 and pastes it going down column A in sheet2. This works fine for me.
Code:
Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
If Range("B" & FirstCopy) "" Then
Range("B" & FirstCopy).Select
Selection.Copy
[code]....
However, now I want to copy every third cell from columns B, D, and F in sheet1 and paste them going down columns A, B, and C in sheet2. When I run the code below I am receiving this error: "Compile error: Wrong number of arguments or invalid property assignment"
Code:
Sub Macro1()
Dim FirstCopy As Integer
Dim FirstPaste As Integer
FirstPaste = 1
For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
[code]....
How to use COUNTIF when there are multiple criteria. For eg. I have 3 columns, and I want to count the # of employees in each row if all 3 criteria in columns C, D, and E hold true.
What I'm looking for is that it ADDS the values, when 2 or more ranges and criteria are met. I don't think it's possible through the SUMIF because it allows "range,criteria,sum_range." But I know there's another way around, if so, please demostrate in a basic formula.
Like.. I have something on A:A (name) and B:B (points), and the formula must meet the 2 ranges & criterias (name & points) to add the values in C:C (money).
# of Project Names that are under Status=Contract (Amount in $’s ) & # of Trks
# of Project Names that are under Status=V Verbal (Amount in $’s) & # of Trks
# of Project Names that are under Status=No ($ Amount lost) & # of Trks lost
# of Project Name that are Lost to (Grandview) that are under Status=No ($ Amount lost) & # of Trks lost
Must be able to add more lines & have instructions so I can do it myself for the future.
I want to SUMIF on 3 columns of data - that is :
=SUMIF($C$3:$C$217,A9,$F$3:$H$217)
But this only returns the data in column F, rather than summing the instances in all 3 columns.
Is it the case that I must use multiple SUMIF functions with each range separated?
I have a problem with using VBA to calculate max/min within multiple selected ranges.
Here is the file: [URL].... I've also attached it below the post.
Column A to D contain the raw data, column G to L contain the trading data. Each trade is marked with "tick" which consists one buy/sell and one close. The entry and close date&time are also included. Then how to match each entry and close date&time from right to left and therefore to look up max/min value within entry and close time from the raw data in the left columns? Respectively, I would like to calculate the min(low) for a buy/close tick and max(high) for a sell/close tick.
The challenges for me:
1.How to match, or reference from the right to left. I knew that "vlookup" could only match one certain value. (correct me if I didn't know enough about "vlookup")
2.The date&time in the left are time intervals while those in the right are time points. How to refer and locate them?
3.In the right side, length of intervals that each tick marked (i.e.from buy to close) are not the same, so should I use a array to contain the length, and then calculate max/min within each? When the data amount get larger, it is not possible to manually use "min" function.
example2.xlsx
I am looking for the formulae in E9.
I may change the value in E8 as 1.5 or 2.5 or 4 or 6 I may scrolldown C9 as it set out there. I need to know the farmulae in E9.
I have developed an evaluation algorithm for residential mortgages, and am having difficulty testing. I am trying to ensure that my scoring model makes sense from every possible scenario. The grading model takes into account multiple factors that most financial institutions would find important when assessing a potential borrower for a loan. Examples of these factors could be an individual's credit score (ranging from 0 - 800), the type of dwelling (multiple options to choose from), etc. In total there are about 20 different factors, each with a minimum of 5 possible options to choose from.
I am trying to create a spreadsheet that lists out all possible combinations of the multiple factors, and trying to input it by hand . To give an example:
Credit Score
Property Dwelling Type
Property Value
100
Townhouse
$350,000
[Code] .....
I've finally figured out how to set up my Marlett checkboxes, but need some help with setting up multiple ranges. I can get up to 2 ranges to work with this
View 2 Replies View RelatedI am trying to use the large function over two ranges. Even though incorrect I will include my original formula that doesn't work to help illustrate.
if(large((L20:L500,W20:W500),1)=I20,$P$4,if((large((L20:L500,W20:W500),2)=I20,$P$5,0)))
Does anybody know of an easy way around this?